# changelog

author: Nalin Dahyabhai <nalin@redhat.com> 4.1.25-13
changelog:
  - add another section to the ABI note for the TLS libdb so that it's marked as
    not needing an executable stack (from Arjan Van de Ven)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - build both with and without support for shared mutex locks, which require NPTL
  - make behavior wrt where we put libdb the same for all OSs
  - revert changes making tcl optional - nesting %if tcl and %ifarch nptl
    doesn't work
  - fix dangling HREFs in utility docs (pointed to main docs dir, while they're
    actually in the -utils docs dir)
  - run ldconfig when installing/removing the -utils subpackage, as it contains
    shared libraries


author: Jeff Johnson <jbj@jbj.org> 4.2.42-0.1
changelog:
  - update to 4.2.42.
  - build in build_unix subdir.
  - eliminate --enable-dump185, db_dump185.c no longer compiles for libdb*.
  - create db4-tcl sub-pkg to isolate libtcl dependencies.


author: Jeff Johnson <jbj@redhat.com> 4.1.25-6
changelog:
  - build with libtool-1.5, which can't recognize the .so in libfoo*.so atm.
  - whack out libtool predep_objects wonkiness.


author: Nalin Dahyabhai <nalin@redhat.com> 4.1.25-2
changelog:
  - change configure to only warn if JNI includes aren't found, assuming that
    the C compiler can find them
  - remove build requirement on jdkgcj -- gcj is sufficient


author: Nalin Dahyabhai <nalin@redhat.com> 4.0.14-20
changelog:
  - add dynamic libdb-4.0.so link back to %{_libdir} so that dynamically
    linking with -ldb-4.0 will work again


author: Nalin Dahyabhai <nalin@redhat.com> 4.0.14-19
changelog:
  - rebuild to use link the shared object with the same libraries we use
    for the bundled utils, should pull in libpthread when needed
  - move libdb.so from /%{_lib} to %{_libdir} where the linker can find it


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - re-enable db.h symlink creation, db_util names, and db[23]-devel obsoletes.
  - make sure that -ldb is functional.


author: Nalin Dahyabhai <nalin@redhat.com> 4.0.14-3
changelog:
  - remove relocatability stuffs
  - swallow a local copy of db1 and build db185_dump statically with it, to
    remove the build dependency and simplify bootstrapping new arches


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix dangling docs symlinks
  - fix dangling doc HREFs (#33328)
  - apply the two patches listed at http://www.sleepycat.com/update/3.2.9/patch.3.2.9.html


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - don't build with --enable-diagnostic.
  - add build prereq on tcl.
  - default value for %_lib macro if not found.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - rather than hack *.la (see below), create /usr/lib/libdb-3.1.so symlink.
  - turn off --enable-diagnostic for performance.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - remove redundant strip of libnss_db* that is nuking symbols.
  - change location in /usr/lib/libdb-3.1.la to point to /lib (#16776).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - summaries from specspo.
  - all of libdb_tcl* (including symlinks) in db3-utils, should be db3->tcl?


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - upgrade to 3.1.14.
  - create db3-utils sub-package to hide tcl dependency, enable tcl Yet Again.
  - FHS packaging.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - disable --enable-test --enable-debug_rop --enable-debug_wop.
  - disable --enable-posixmutexes --enable-tcl as well, to avoid glibc-2.1.3
    problems.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - add 3.0.55.1 alignment patch.
  - add --enable-posixmutexes (linux threads has not pthread_*attr_setpshared).
  - add --enable-tcl (needed -lpthreads).


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  - 2.28-5
  — prepare for F11 mass rebuild, new rpm and new fontpackages
  — drop compatibility provides as announced at F11 alpha time


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  - 2.28-2
  — Update URL
  — update for new naming guidelines
  – warning: provides for the old names will be dropped before F11 beta


author: <nicolas.mailhot at laposte.net>
changelog:
  - 2.28-1
  ❄ Update to latest release
  ❅ Drop upstreamed fontconfig patch
  ❆ Remove DejaVu from most summaries


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  - 2.26-6
  ⧎ Package split reorganisation, following font family lines
  ⵞ Create compat packages to ease switchover at F11 time (to be discontinued
    for F12)
  ⬳ compress status file


author: <nicolas.mailhot at laposte.net>
changelog:
  ☺ 2.21-0.3.20071025svn2022
   ✓ Makefile patch dropped (merged upstream)
   ✓ add -f to fc-cache calls
   ✓ completely align LGC and FULL fontconfig rules
   ✓ remove / from directory macros


author: <nicolas.mailhot at laposte.net>
changelog:
  ☢ 2.21-0.2.20071017svn2019
  ⚠ Still very experimental version:
    ✓ update makefile patch
    ✓ split lgc hinting file like in the other packages
    ✓ move lgc to prio 58 as should have been done when liberation was added


author: <nicolas.mailhot at laposte.net>
changelog:
  ☢ 2.21-0.1.20071014svn2016
  ⚠ Very experimental version to test major changes:
    ✓ new fontforge version
    ✓ use of a real makefile at last
    ✓ replacing standalone lgc package with subpackage generated with the rest


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  ☺ 2.18-1
  ✓ 2.18 final
  ✓ Major new release adding Tifinagh (ⵞⵥⴼⴻ), N'ko (ߝߧߜ) and Georgian (ლფჱႫႿ)
    (Georgian created by Besarion Paata Gugushvili ბესარიონ პაატა გუგუშვილი)


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  ☺ 2.17-2
  ✓ perl-Font-TTF has been fixed upstream, use perl(Font::TTF) BR
  ✓ remove comment about /etc/fonts/conf.d ownership, as it's now owned
     by filesystem


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  ☺ 2.17-1
  ✓ rebase scriptlets from guidelines
  ✓ fontforge broke compat: BR the current version, ask for a version bump
    before 2.18 is released
  ✓ simplify font directory naming
  ✓ clean up fc5 obsoletes
  ✓ remove technical mes files from doc


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  ☺ 2.17-0.3.rc1
  ✓ fontconfig setup has stabilized and can be marked noreplace now
  ☺ 2.17-0.2.rc1
  ✓ mimick Vera unhint conf split
  ☺ 2.17-0.1.rc1
  ✓ 2.17 rc1
  ✓ make room for liberations font conf file


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  ☺ 2.14-2
  ✓ Adds Dejavu Sans Oblique small fixes (by Ben Laenen to address Debian
    bug #408311, collected by Davide Viti)


author: Ray Strode <rstrode@redhat.com> - 1:1.2.16-9
changelog:
  Resolves: #547808
  - Fix activation of daemons (#545267)
  - Fix reload memleak (fdo #24697)
  - Don't forget about pending activations on reload (fdo #24350)
  - Fix reload race (fdo #21597)


author: Colin Walters <walters@redhat.com> - 1:1.2.16-2
changelog:
  - Explicitly add a dbus group id, fixes dbus files getting a
    random group id in cases where the RPM install order varies.
    Fixes https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=458183


author: Colin Walters <walters@redhat.com> - 1:1.2.16-1
changelog:
  - Upstream 1.2.16
  - Remove inotify patch, now upstreamed
  - Remove timeout patch, obsolete with upstream change to infinite
    timeout maximum by default


author: Matthias Clasen <mclasen@redhat.com> - 1.2.1-6
changelog:
  - Add a patch from upstream git that adds a method
    for changing the activation environment on the session bus


author: John (J5) Palmieri <johnp@redhat.com> - 1.2.1-1
changelog:
  - update to latest upstream
  - major version change is really a maint release for 1.1.20
    please read the NEWS file in the source for more information


author: David Zeuthen <davidz@redhat.com> - 1.1.20-1.el6
changelog:
  - Update to latest upstream release. Includes fix for CVE-2008-0595.
  - Drop some patches that went upstream already


author: John (J5) Palmieri <johnp@redhat.com> - 1.1.3-1
changelog:
  - new upstream version which obsoletes a number of our patches
  - doc section added for the devhelp docs


author: Dan Walsh <dwalsh@redhat.com> - 1.1.2-5.el6
changelog:
  - Reverse we_were_root check to setpcap if we were root.  Also only init
  audit if we were root.  So error dbus message will not show up when policy 
  reload happens.  dbus -session will no longer try to send audit message, 
  only system will.


author: David Zeuthen <davidz@redhat.com> - 1.1.2-2.el6
changelog:
  - Move system bus activation helper to /{lib,lib64}/dbus-1. Also set
    the correct mode and permissions. 
  - Own the directory /usr/share/dbus-1/system-services
  - Delete the diretory /{lib,lib64}/dbus-1.0 as it's not used
  - Pass 'dbus' instead of 81 as --with-dbus-user; otherwise the setuid
    system bus activation helper fails


author: Ray Strode <rstrode@redhat.com> - 1.0.1-1
changelog:
  - Update to 1.0.1
  - Apply patch from Thiago Macieira <thiago@kde.org> to 
    fix failed assertion in threading implementation
  - Drop some crazy looking build time speed optimization


author: John (J5) Palmieri <johnp@redhat.com> - 0.90-6
changelog:
  - change the arch-deps.h include directory to /usr/lib[64] instead of /lib[64]
    in the dbus-1.pc file after compile


author: John (J5) Palmieri <johnp@redhat.com> - 0.90-4
changelog:
  - add patch that pregenerates the xml introspect file so d-bus doesn't
    have to be running suring the build.


author: Karsten Hopp <karsten@redhat.de> 0.61-5.2
changelog:
  - add buildrequires libICE-devel, libSM-devel, libcap-devel
  - change buildrequires form libX11 to libX11-devel


author: John (J5) Palmieri <johnp@redhat.com> - 0.61-5
changelog:
  - Backport patch from dbus-connection.c
    - Allows interfaces to be NULL in the message header as per the spec
    - Fixes a problem with pendings calls blocking on a data starved socket


author: John (J5) Palmieri <johnp@redhat.com> 0.61-3
changelog:
  - ABI hasn't changed so add patch that makes dbus-sharp think
    it is still 0.60 (mono uses hard version names so any change
    means apps need to recompile)


author: John (J5) Palmieri <johnp@redhat.com> 0.60-7
changelog:
  - Add patch to fix the python callchain
  - Symlink dbus-send to /usr/bin because some applications
    look for it there


author: John (J5) Palmieri <johnp@redhat.com> 0.60-5
changelog:
  - move base libraries and binaries to /bin and /lib so they can be started
    before /usr is mounted on network mounted /usr systems
  - have D-Bus start early


author: John (J5) Palmieri <johnp@redhat.com> - 0.36.2-1
changelog:
  - upgrade to 0.36.2 which fixes an exploit where
    users can attach to another user's session bus (CAN-2005-0201)


author: John (J5) Palmieri <johnp@redhat.com> - 0.36-1
changelog:
  - Upgrade to dbus-0.36
  - Split modules that go into %{_lib}/python2.4/site-packages/dbus
  and those that go into %{python_sitelib}/dbus (they differ on 64bit)
  - Renable Qt bindings since packages in core can use them


author: John (J5) Palmieri <johnp@redhat.com> - 0.35.2-1
changelog:
  - Upgrade to dbus-0.35.2
  - removed dbus-0.34-kill-babysitter.patch
  - removed dbus-0.34-python-threadsync.patch
  - removed dbus-0.23-selinux-avc-audit.patch
  - added dbus-0.35.2-selinux-avc-audit.patch
  - take out restarts on upgrade


author: John (J5) Palmieri <johnp@redhat.com> - 0.34-1
changelog:
  - Upgrade to dbus-0.34
  - added dbus-0.34-kill-babysitter.patch
  - added dbus-0.34-python-threadsync.patch
  - remove dbus-0.32-print_child_pid.patch
  - remove dbus-0.32-deadlock-fix.patch
  - remove dbus-0.33-types.patch


author: John (J5) Palmieri <johnp@redhat.com> - 0.32-5
changelog:
  - replace selinux_init patch with selinux_chroot_workaround patch
    to work around bad selinux interactions when using chroots
    on the beehive build machines


author: John (J5) Palmieri <johnp@redhat.com> - 0.32-2
changelog:
  - add selinux-init patch to fix dbus from segfaulting when
    building on machines that don't have selinux enabled


author: John (J5) Palmieri <johnp@redhat.com> - 0.31-1
changelog:
  - update to upstream version 0.31
  - take out user has same id patch (merged upstream)
  - udi patch updated
  - dbus-daemon-1 renamed to dbus-daemon
  - dbus-glib-tool renamed to dbus-binding-tool
  - force gcc33 because pyrex generate improper lvalue code
  - disable audit patch for now


author: John (J5) Palmieri <johnp@redhat.com> - 0.23-4
changelog:
  - Explicitly pass in the pid file location to ./configure instead of
    letting it guess based on the build enviornment


author: John (J5) Palmieri <johnp@redhat.com> - 0.23-1
changelog:
  - Update to upstream version 0.23
  - Drop all patches except for the UDI patch as they have been 
    integrated upstream 
  - List of API changes:
        * add setgroups() to drop supplementary groups
        * removed dbus_bug_get_with_g_main since it's been replaced by dbus_g_bus_get
        * added support for int64 and uint64 to the python bindings
        * use SerivceOwnerChanges signal instead of ServiceCreated and ServiceDeleted


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Add a requires for glib2-devel in the devel package
  - Add SE-Linux backport from Colin Walters that fixes 
    messages getting lost in SE-Linux contexts


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Fixed patch to use dbus-1 instead of dbus-1.0
  - (configure.in): Exported just the datadir instead of
    the full path to the dbus datadir for consistency


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - reverting BuildRequires: redhat-release because of issues with build system
  - added precompiled version of the messagebus init script


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Moved dbus-viewer to new dbus-gtk package so that dbus-glib
    no longer requires X or GTK libraries. (RH Bug #130029)


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Added lib64 workaround for python bindings installing to
    the wrong lib directory on 64 bit archs


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Moved dbus-viewer, dbus-monitor and dbus-glib-tool 
    into the dbus-glib package so that the main dbus
    package does not depend on glib (Bug #125285)


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Conflict with cups prior to configuration file change, so that the
    %postun service condrestart works.


author: Havoc Pennington <hp@redhat.com> 0.13-2
changelog:
  - see if removing qt subpackage for now will get us through the build system,
    qt bindings not useful yet anyway


author: Havoc Pennington <hp@redhat.com> 0.11.91-3
changelog:
  - break the tiny dbus-launch that depends on X into separate package
    so a CUPS server doesn't need X installed


author: Havoc Pennington <hp@redhat.com> 0.6.93-1
changelog:
  - new cvs snap that actually forks to background and changes 
    user it's running as and so forth
  - create our system user in pre


author: Havoc Pennington <hp@redhat.com> 0.6.91-1
changelog:
  - disable qt for now because beehive hates me
  - pull a slightly newer cvs snap that creates socket directory
  - cat the make check log after make check fails


author: John (J5) Palmieri <johnp@redhat.com> - 0.80.1-1
changelog:
  - upgrade to 0.80.1
  - remove dependency on Pyrex and libxml2
  - some API breakage, 
    please see http://dbus.freedesktop.org/doc/dbus-python/NEWS.html
    for notes on changes


author: Karsten Hopp <karsten@redhat.com> 0.9.15-4
changelog:
  - buildrequire libconfig-devel >= 1.3.2, it doesn't build with 1.3.1 due to
    the different config_lookup_string api


author: Jan Zeleny <jzeleny@redhat.com> - 0.9.7-3
changelog:
  - added devel files again to support fcoe-utils package
  - added kernel >= 2.6.29 to Requires, deleted dcbnl.h, since it is
    aviable in kernel 2.6.29-rc7
  - changed config dir from /etc/sysconfig/dcbd to /etc/dcbd
  - updated init script: added mandatory Short description tag,
    deleted default runlevels, which should start the script


author: Chris Leech <christopher.leech@intel.com> - 0.9.7-1
changelog:
  - Updated to 0.9.7
  - Added a private copy of dcbnl.h until kernel-headers includes it.
    Export patch is making it's way to the upstream kernel via net-2.6,
    expected in 2.6.29-rc7


author: Bill Nottingham <notting@redhat.com> - 9.03.4-1
changelog:
  - move ccw_init, ccw udev rules to s390utils (#539491)
  - network-functions: clean up device checks (#564505)


author: Bill Nottingham <notting@redhat.com> - 9.03.3-1
changelog:
  - pass -m to runuser to not clear environment (#564105)
  - don't use deprecated udev syntax in clock rules (#560801)
  - don't quote regex argument to bash's =~ (#558575, <ville.skytta@iki.fi>)
  - if HWADDR is set and DEVICE is not, use HWADDR to determine DEVICE. (#557941)
  - don't HUP init when messagebus starts (#557821)
  - setsysfont: use UNIMAP rather than SYSFONTACM when calling /bin/unicode_start. (#557173)


author: Bill Nottingham <notting@redhat.com> - 9.03.2-1
changelog:
  - ifup-eth: use dhclient's -H option instead of munging dhclient config files
  - rc.sysinit: move mdadm after dmraid (#554423)
  - ifup-eth: use dhclient -6, not the no-longer-included dhcp6c (#553019, <dcantrell@redhat.com>)
  - add more man pages (#529328, <plautrba@redhat.com>)
  - remove useless echo (#552785)
  - move is_wireless after MACADDR/MTU setting (#552641)
  - serial.conf: respawn correctly. (#552611, <zing@fastmail.fm>)
  - network-functions: use sysfs for wireless check (#552381, <adel.gadllah@gmail.com>)
  - reload init on started messagebus (<plautrba@redhat.com>)
  - honor HOTPLUG in ifdown (#547737)


author: Bill Nottingham <notting@redhat.com> - 9.03.1-1
changelog:
  - re-enable network service (#545255)
  - ifdown: honor HOTPLUG (#547737)
  - silence any erros from bonding adds (#516569)
  - remove assorted configurations we don't support the tools for
    (ipsec-tools ipsec, cipe, IPX)


author: Bill Nottingham <notting@redhat.com> - 9.03-1
changelog:
  - migrate to upstart 0.6.x (<notting@redhat.com>, <plautrba@redhat.com>)
  -- jobs move to /etc/init
  -- collapse rcX and ttyX jobs into single job definitions
  -- jobs are no longer %config
  - remove obsolete doexec command
  - rc.sysinit: handle yet another random return string from dmraid
  - remove never-used 'sulogin' upstart event
  - fix time-setting udev rules for old-style RTC devices (#537595)
  - init.d/network: keep error codes limited to '1'. (#537841)
  - add initial ifup/ifdown man pages. (#529328, <plautrba@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 9.02-1
changelog:
  - remove long-since deprecated initlog
  - remove IUCV support (#507217)
  - halt: put a wrapper around killall5 to account for retval 2 not being an error (#526539, <hdegoede@redhat.com>)
  - ifup-eth: honor DEFROUTE=yes|no for 'all' connection types. (#528822)
  - network-functions: load bonding driver if BONDING_OPTS is defined. (#516569)
  - rc.sysinit: put /dev/shm in mtab too, as dracut now mounts it. (#528667)


author: Bill Nottingham <notting@redhat.com> - 9.01-1
changelog:
  - rc.sysinit: fix handling of dmraid output to avoid error messages (#527726, <mschmidt@redhat.com>)
  - rwtab: add /var/lib/xend (#526046)
  - translation updates: fi, nb, pl


author: Bill Nottingham <notting@redhat.com> - 9.00-1
changelog:
  - halt: wrap /sbin/killall5 to catch some return codes (#526539)
  - netfs, netconsle, network: fix return codes to match LSB spec (#524489, #524480, #524486)
  - handle kernels compiled both with and without CONFIG_RTC_HCTOSYS
  - halt: use killall5's return code to avoid unncesssary sleeping (#524359, <hdegoede@redhat.com>)
  - halt: don't kill mdmon on shutdown. (#524357, <hdegoede@redhat.com>)
  - rc.sysinit: do not try and activate ISW raidsets, unless noiswmd is passed. (#524355, <hdegoede@redhat.com>)
  - translation updates: ca, cs, da, mai, po, sv, uk


author: Bill Nottingham <notting@redhat.com> - 8.99-1
changelog:
  - init.d/functions: add a '-l' option to status to pass lock file name (#521772)
  - tweak kernel conflict
  - translation updates: as, bn_IN, de, fr, hi, it, hu, kn, mr, or, pa, pt, ru, te


author: Bill Nottingham <notting@redhat.com> - 8.98-1
changelog:
  - sysconfig.txt: doucment DHCP_HOSTNAME (#498052)
  - 88-clock.rules: Use --systz instead of --hctosys. (#517886, #489494)
  - Support rwtab and state passed from dracut initrd (#515771, <wtogami@redhat.com>)
  - restore context of *tmp files (#519748)
  - halt: don't try and save mixer settings if it's not writable. (#515771)
  - rwtab: add /var/spool, /var/lib/dbus, others (#494973, #515771)
  - sysconfig.txt: clarify docs (#518614)
  - rc.sysinit: don't pretend /selinux is configurable (#518164)
  - assorted ipv6 redundant code deletion
  - translation updates: bn, ca, de, es, fi, fr, gu, hi, it, ja, ko, ml, nb, nl, pl, pt, pt_BR, ru, sr, ta, zh_CN, zh_TW


author: Bill Nottingham <notting@redhat.com> - 8.97-1
changelog:
  - ipcalc: fix IPv6 address checking (#516319)
  - ifup-aliases: fix syntax error from earlier cleanups. (#515612, <jik@kamens.brookline.ma.us>)
  - translation updates: nb
  - rc.sysinit: remove useless call to pam_console_apply


author: Bill Nottingham <notting@redhat.com> - 8.96-1
changelog:
  - fix up upstart rules for s390(x). (#515222)
  - leave ChangeLog in the tarball only. (#515012)
  - disable netfilter on bridged interfaces. (#512206)
  - assorted shell-related cleanups to ipv6 and other code (<victor.lowther@gmail.com>)
  - use resolv.conf from dracut netboot before setting hostname. (#514801, <wtogami@redhat.com>)
  - ipcalc updates (<victor.lowther@gmail.com>)
  - only use ethtool for link checking; no more mii-tool
  - require /sbin/blkid directly, as it moves between packages (#508413)
  - redirect bash errors on 'unset' to /dev/null. (#482888)
  - fix dmraid partition naming (#501476, <hdegoede@redhat.com>)
  - don't quote upstart signals. (#501155)
  - translation updates: bn_IN, da, es, sk


author: Bill Nottingham <notting@redhat.com> - 8.95-1
changelog:
  - don't kill runlevel events on subsequent entering of the same runlevel (#498514)
  - lang.*sh: handle spaces in $HOME (#498482)
  - network-functions: explicitly source from the proper directory. (#496233)
  - remove persistent names on sys-unconfig. (#448322)
  - init.d/functions: cgexec has moved to /bin (#495715)
  - allow changing of VLAN type even if the module is already loaded. (#495053, <pietro@bertera.it>)
  - translation updates: fr, ml, pt


author: Bill Nottingham <notting@redhat.com> - 8.94-1
changelog:
  - prefdm: add simple fallbacks, sort rpmdb query for consistency (#494461)
  - translation updates; bn, de, pt, ru, te


author: Bill Nottingham <notting@redhat.com> - 8.93-1
changelog:
  - rc.sysinit: add a disk synchronization point with scsi_wait_scan post-udev (#481470)
  - netfs: drop smbfs support, we don't even ship the module or tools any more
  - setsysfont: honor LC_CTYPE (#487133, <skasal@redhat.com>)
  - prefdm: do fallbacks based on provides of 'service(graphical-login)' (#485751)
  - rc.sysinit: handle multiple IP addresses without choking in the stateless code (#443945)
  - rc.sysinit: catch the right error code from checking for passphrases (#483269, <vladis.kletnieks@vt.edu>)
  - prefdm: handle empty /etc/sysconfig/desktop correctly (#480113)
  - ifup-ipsec: allow use of either ESP only or AH only (#251494, <stijn.tintel@x-tend.be>)
  - ifup-eth: allow passing of arguments to dhcp6c (#437949, <pekkas@netcore.fi>)
  - ifup-eth: fix dhcpv6 when there is no IPv4 configuration (#486507)
  - ifup-ppp: avoid spurious SIGCHLD to pppd (#448881)
  - ifup-eth: add support for creating TUN/TAP devices on the fly (#453973, <scott@zahna.com>)
  - stop plymouth when starting single-user mode. (#491062)
  - add plymouth shutdown script (#473237, <jmccann@redhat.com>)
  - fix lang.sh/lang.sh/consoletype for execution with '-e'
  - ifdown-eth: remove arp_ip_target on ifdown for bonding devices. (#483711)
  - add vlan support for s390 HSI interfaces. (#490584)
  - ipcalc: support IPv6 (#464268, <dcantrell@redhat.com>)
  - translation updates: all


author: Bill Nottingham <notting@redhat.com> - 8.91-1
changelog:
  - fix DHCP reading of options from ifcfg-XXX (#483257)
  - ifdown-eth: clean up bridges on ifdown (#463325, <sean@bruenor.org>)
  - support MD on iSCSI (#480627)
  - remove support for 'ifcfg-foo-bar' configurations that inherit from 'ifcfg-foo'
  - remove slip support
  - translation updates: es, pl, ca, sr, de, sv, pa, pt_BR


author: Bill Nottingham <notting@redhat.com> - 8.90-1
changelog:
  - init.d/functions: cgroup support (<jsafrane@redhat.com>)
  - fix various issues with dmraid handling (#485895, <hdegoede@redhat.com>)
  - rc.sysinit: fix typo. (#487926)
  - console_init: loadkeys has a -q option for silent running. Use it.
  - ifup-tunnel: add compatiblity for openNHRP tunnels (#486559, <claude.tompers@ieee.lu>)
  - ccw_init: don't re-init an existing device, it causes errors. (#484411, <jpayne@redhat.com>)
  - netfs: use same kpartx arguments as rc.sysinit
  - don't list mtab in rwtab (#457941)
  - translation updates: fi, de, mai


author: Bill Nottingham <notting@redhat.com> - 8.89-1
changelog:
  - use a leading path when sourcing files (#482826)
  - netfs: don't unmount nfsd filesystem by accident (#481794, <sprabhu@redhat.com>)
  - bring up ipsec interfaces last (#481733)
  - ifdown-eth: fix bridge + vlan (#481557, <danken@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 8.87-1
changelog:
  - rename_device: be much faster in the presence of many devices (#480687, <danms@us.ibm.com>)
  - fix switching from targeted to MLS policy (#479054, <dwalsh@redhat.com>)
  - rc.sysinit: don't set $(uname -r) or $(uname -m); they're not used
  - network-functions-ipv6: set MTU correctly for 6to4. (#477976, <ackistler@yahoo.com>)
  - add more entries to rwtab (#476799, <harald@redhat.com>)
  - net.hotplug: Bail out sooner if the network service isn't running
  - init.d/halt: determine reboot/halt via existing INIT_HALT environment variable. (#475227)
  - event.d/serial: add some docs
  - init.d/functions: __pids_var_run: Handle multi-line pid files correctly (#473287)
  - remove support for no longer existing 'brctl setgcint' command. (#360471)
  - add %config back for ifcfg-lo (#472761)
  - rcS/rcS-sulogin: don't match commented lines when finding runlevel (#472717)
  - updated translations: de, sk


author: Bill Nottingham <notting@redhat.com> - 8.86-1
changelog:
  - stop plymouth before stopping the runlevel (#467207)
  - fix get_config_by_subchannel (#459044, <harald@redhat.com>)
  - use blkid -l to pick a single most appropriate device (#470027)
  - don't mkswap on halt, as it breaks swap-by-label/UUID (#469823)


author: Bill Nottingham <notting@redhat.com> - 8.85-1
changelog:
  - add some error handling/hiding to netfs NM dispatcher script (#469197)
  - halt: fix code that causes a syntax error on multiple sound cards (#469156)
  - require a new enough udev version to handle where we put the rules
  - exit 0 in /etc/rc.d/rc (#469050)
  - don't set up encrypted devices that have already been set up under different
    names (#462371, <wwoods@redhat.com>)
  - accept either the '+<addr>', or comma-separated addresses for arp_ip_target. (#467954,
    <darcy.sherwood@gmail.com>)
  - translation updates: hu, kn, ko, ml, sr, sr@latin


author: Bill Nottingham <notting@redhat.com> - 8.84-1
changelog:
  - override Arabic, Persian, and Hebrew on the console (<alsadi@ojuba.org>)
  - explicitly run mdadm on boot to catch degraded arrays. (<dledford@redhat.com>)
  - fix setting of console font/map (#458362, <ak@sensi.org>)
  - translations updates: hi, kn, nb, sk, sv, ta


author: Bill Nottingham <notting@redhat.com> - 8.83-1
changelog:
  - various merge review fixes (#225900)
    Notably: init scripts/network scripts are no longer %config
  - remove some extraneous device-mapper initialization
  - use pidfile in status before calling pidof (#463205)
  - use plymouth directly, not the rhgb-client wrapper
  - move bridging after bonding (#449950, <djuran@redhat.com>)
  - use alsactl to save sound settings. (#462677, <jkysela@redhat.com>)
  - quit plymouth differently (<rstrode@redhat.com>)
  - make sure we don't try and spawn a repair shell when there's no
    tty (#463161)
  - move udev rules to /lib
  - stateless updates (#433702, <harald@redhat.com>)
  - call logger with a full path (#447928, <harald@redhat.com>)
  - translation updates: as, bn_IN, ca, cz, de, es, fi, fr, gu, it, ja,
    lv, mr, nl, or, pa, pl, pt_BR, ru, te, zh_TW


author: Bill Nottingham <notting@redhat.com> - 8.82-1
changelog:
  - refresh translation strings
  - plymouth updates. (#460702, <rstrode@redhat.com>)
  - translation updates: fi, lv, no
  - remove duplicate dependency (#465182)
  - ifup-eth: Change how we set the zeroconf route. (#239609)
  - ifup*: Use 0.0.0.0/0, not 0/0. (#460580)


author: Bill Nottingham <notting@redhat.com> - 8.81-1
changelog:
  - rc.sysinit: Don't use -L in find (#458652, #458504, CVE-2008-3524)
  - ifup: kill more code from loopback bringup


author: Bill Nottingham <notting@redhat.com> - 8.80-1
changelog:
  - Fix translation typo (#455804, <ruslanpisarev@gmail.com>)
  - Turn off syncookies
  - Cleanups for proper plymouth support
  - Move the mcheck code to a debugmode package, make it more generic


author: Bill Nottingham <notting@redhat.com> - 8.79-1
changelog:
  - fix mcheck stuff to be installed correctly
  - don't do an arping check for loopback interfaces
  - console_init: don't wait (<arjan@infradead.org>)
  - rc: clean up extraneous set -x noise
  - remove references to static dmraid/multipath binaries (#453987)
  - translation updates: lv


author: Bill Nottingham <notting@redhat.com> - 8.77-1
changelog:
  - NMDispatcher/05-netfs: fix check for default route (#445509)
  - service: don't set $LANG, rely on it to inherit from system locales (#422141)
  - init.d/functions: fix resolve_dm_raid() for older dmraid configs
  - Don't unmount sysfs in halt. (#446292)
  - rc.sysinit: don't try to startup crypto if we can't find the device
  - rc.sysinit: don't echo crypto stuff unless we're actually *doing* something
  - ifup: don't try to rename devices - udev rules are the way to go
  - rc.sysinit: fix typo, and don't restorecon on swap, etc. partitions (#448886)
  - set MALLOC_CHECK_ & MALLOC_PERTURB_ if configured (<pjones@redhat.com>)
  - console_init: support SYSFONTACM correctly, and support UNIMAP (#448704,
    <vvv+fedora@colocall.net>)
  - don't export GRAPHICAL - plymouth is for all modes. also, don't start rhgb
  - fix clock rules to properly handle old-style RTC devices (#447019)
  - translation updates: ko, or, pl


author: Bill Nottingham <notting@redhat.com> - 8.74-1
changelog:
  - use full path to /sbin/ip in NetworkManagerDispatcher script (#444378)
  - lang.{sh,csh}: read only user customization if LANG is already set (#372151)


author: Bill Nottingham <notting@redhat.com> - 8.73-1
changelog:
  - move event-compat-sysv events here, obsolete it
  - fix ctrl-alt-del during rc.sysinit (#444050)
  - fix 'telinit X' from single-user mode (#444001)


author: Bill Nottingham <notting@redhat.com> - 8.71-1
changelog:
  - adjust to gdm using LANG instead of GDM_LANG (#372151, <rstrode@redhat.com>)
  - rework netfs' check for networking availability to properly handle both network
    and NetworkManager


author: Bill Nottingham <notting@redhat.com> - 8.70-1
changelog:
  - find is now in /bin. Use it. (#192991, #239914, #244941, #442178)
  - require event-compat-sysv for now (#442291)
  - fix serial event to wait properly
  - handle encrypted LVs properly (#441728)
  - add a sit tunnel type (#441635)
  - translation updates: ru


author: Bill Nottingham <notting@redhat.com> - 8.69-1
changelog:
  - Bring up lo whenever it shows up, not just in network/NM
  - fix shutdown-related oddities (#438444)
  - translation updates: el, sr, sr@latin, sv


author: Bill Nottingham <notting@redhat.com> - 8.68-1
changelog:
  - netfs: umount 'ncp' filesystems as well (#437117)
  - improve performance of s390 ccw rules (#437110, <mernst@de.ibm.com>)
  - fix consoletype environment leak (#439546)
  - ifdown-eth: make sure NEWCONFIG exists before grepping for it (#390271, continued)
  - console_check: always open with NONBLOCK, clear the serial structs first,
    handle non-16550 ports (<dwmw2@infradead.org>)
  - halt: don't use /etc/sysconfig/clock (#438337)
  - ifup: don't attempt to re-enslave already-enslaved devices (#440077)
  - netfs: run as a NetworkManagerDispatcher script (#439242)
  - netfs: remove $local_fs from the list of provides (making it implicitly provided
    by booting)
  - serial: add a crude hack to wait for runlevels to finish (#437379)
  - serial: frob /etc/securetty when necessary (#437381)
  - add a upstart-specific inittab
  - translation updates: as, bn_IN, cs, de, es, fi, fr, gu, hi, it, ja, kn, ml, mr, nb,
    nl, pa, pl, pt_BR, ru, sk, sr, ta, te, zh_CN


author: Bill Nottingham <notting@redhat.com> - 8.65-1
changelog:
  - Add a serial console udev/upstart handler (#434764, indirectly)
  - Add some upstart notification for sysv scripts (modified from <cjdahlin@ncsu.edu>, #431231)
  - Handle _rnetdev correctly (#435358, <pjones@redhat.com>)
  - various minor speedups (<arjan@infradead.org>)
  - translation updates: el, fr
  - disable network by default, in favor of NetworkManager


author: Bill Nottingham <notting@redhat.com> - 8.64-1
changelog:
  - Add a console_init udev helper to do console initialization
  - add /sbin/pidof requirement (#434863)


author: Bill Nottingham <notting@redhat.com> - 8.63-1
changelog:
  - don't start RAID arrays in rc.sysinit, that's done by udev (corollary of #429604)
  - add a NetworkManager-dispatcher script that does netreport on interface changes
  - use udev rules to set the clock, avoiding issues with modular rtcs (#290731)


author: Bill Nottingham <notting@redhat.com> - 8.61-1
changelog:
  - use lvm, not lvm.static (#429222)
  - ifup-eth: don't do something odd if we find a mac address that
    matches the user-set MACADDR (#251415)
  - rc.sysinit: fix root fs check to catch 'rw,ordered,noatime,etc.' properly
    (#334171)
  - rc.sysinit: Use proper invocations for authconfig, system-config-network
    (#426372, #428202)
  - service: handle unreadable scripts (#427767)
  - initscripts.spec: add requirements for stateless
  - fix perms on /etc/profile.d (#407531, <ville.skytta@iki.fi>)
  - rename_device: handle quoted HWADDR, etc. in ifcfg scripts (#351291)
  - minor stateless fixes
  - Makefile cleanups (from OLPC, <cscott@cscott.net>)
  - translation updates: fr, ru, nb
  - don't endelessly loop on ifdown (#390271)
  - rc.sysinit: - fix encrypted swap partitions with random key
    (<harald@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 8.59-1
changelog:
  - rc.sysinit: fix rhgb check
  - prefdm: add wdm section (#248087)
  - init.d/functions, halt: clean up some extraneous delays (#219816)
  - ifup-wireless: set mode before bringing link up (#254046, <linville@redhat.com>)
  - translation updates: pt_BR, hr


author: Bill Nottingham <notting@redhat.com> - 8.58-1
changelog:
  - revert kernel conflict so that xen can still work (#319401)
  - rename_device, 60-net.rules: only suggest an interface name (part of #264901)
  - require newer udev for persistent net rules (part of #264901)
  - don't hang if someone puts a dangling pipe in /etc/rhgb/temp (#251219)
  - genhostid: fix for 64-bit systems (#306811)
  - more bash matching fixes (#220087)
  - translation updates: is, nb


author: Bill Nottingham <notting@redhat.com> - 8.57-1
changelog:
  - work around upstream bash changes (#220087, modified from <nvigier@mandriva.com>)
  - init.d/network: add Should-Start for firewall services
  - ifup-eth: handle arp_ip_target separately (#288151, <agospoda@redhat.com>)
  - rc.sysinit: remove rc.serial support - should be udev rules
  - rc.sysinit: remove acpi module loading - now supported by the kernel automatically
  - fix en_GB translation (#271201)
  - translation updates: as, bn_IN, bg, ca, cs, de, el, es, fi, gu, hi, it, ja, ko, kn, ml,
    mr, nb, nl, pa, pl, pt, pt_BR, ro, sl, sr, sr@Latn, sv, ta, te, zh_CN


author: Bill Nottingham <notting@redhat.com> - 8.56-1
changelog:
  - rename_device: fix open() call
  - rc.sysinit: optimize out some excess greps (<harald@redhat.com>)
  - halt: support newer nut syntax, conflict with old versions (#252973, <tsmetana@redhat.com>)
  - fix buildreq from popt -> popt-devel
   - newer popt is in /lib|/lib64 - require it, and link dynamically
  - rc.sysinit: added support for cryptsetup-uuids (bug #242078, <harald@redhat.com>)
  - netconsole: fix status(), assorted other cleanups
  - translation updates: fr, ro, sk


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add /etc/networks (#239602)
  - rc.sysinit: fix quotacheck, remove obsolete convertquota (#249003, <tometzky@batory.org.pl>)
  - rc.sysinit: add gfs2 to the 'don't mount here' list (#248985)
  - netfs: check for rpcbind, not portmap (#245595)
  - ifup-eth: set 'primary' later for bonding devices (#236897, <agospoda@redhat.com>)
  - translation updates: cy, en_GB, mk, ml, ms, pl, sk, ta, zh_CN


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - avoid calling unicode_start unnecessarily often during startup/shutdown which
    causes certain monitor/video card combos to flicker heavily (#237839)


author: Bill Nottingham <notting@redhat.com> 8.54-1
changelog:
  - translation updates: as, bg, cs, ja, ms
  - redirect bogus errors from cryptsetup to /dev/null <karsten@redhat.com>


author: Bill Nottingham <notting@redhat.com> 8.53-1
changelog:
  - init.d/halt: use sound saving wrapper from alsa-utils, conflict with
    older versions (#236916)
  - usernetctl: drop user gid (#229372)
  - translation updates: ta, pt_BR, nb, as, hi, de


author: Bill Nottingham <notting@redhat.com> 8.52-1
changelog:
  - lang.sh: fix locales where SYSFONT is not the default (#229996)
  - ifup-wireless: properly quote arguments (#234756)
  - readonly-root: add options for mounting state (#234916)
  - rwtab: updates (#219339, <law@redhat.com>)
  - add netconsole init script (#235952)
  - disable link checking when PERSISTENT_DHCLIENT is set (#234075)
  - restore file context on /etc/resolv.conf (#230776, <dwalsh@redhat.com>)
  - ifup-post: only use the first address (#230157, <michal@harddata.com>)
  - ifup-ipsec: allow overriding of my_identifier (#229343, <cmadams@hiwaay.net>)
  - ifup-wireless: set link up before itweaking wireless parameters (#228253)
  - rc.sysinit: restorecon on mount points when relabeling (#220322)
  - init.ipv6-global: cleanup & optimize sysctl usage (#217595)
  - ifup-eth: support ETHTOOL_OPTS on bridge devices (#208043, <bbaetz@acm.org>)
  - network-functions-ipv6: as we don't use NETWORKING_IPV6, silence errors (#195845)
  - fix description (#229919)
  - translation updates


author: Bill Nottingham <notting@redhat.com> 8.51-1
changelog:
  - fix 'Fedora Fedora' in rc.sysinit
  - halt: use kexec -x to not shut down network (#223932, <mchristi@redhat.com>)
  - network_functions: fix is_bonding_device logic (#229643)
  - translation updates: nb


author: Bill Nottingham <notting@redhat.com> 8.50-1
changelog:
  - lang.csh, lang.sh: if $LANG is set, don't override it (#229102)
  - initlog.1: fix man page formatting (<esr@thyrsus.com>)
  - network-functions: simplify bonding test (#215887, <herbert.xu@redhat.com>)
  - fix ifup-post when lookup fails (#220318, <hiroshi.fujishima+redhat@gmail.com>)
  - add bridging docs (#221412, <markmc@redhat.com>)
  - release bonding slaves properly (#220525)
  - fix ppp-watch with ONBOOT=yes (#216749)
  - support VLAN_PLUS_VID_NO_PAD (#222975, #223011)
  - remove NETWORKING_IPV6; to disable, use a modprobe rule
  - translation updates: ms, de, el, pt_BR, fi, bs, sr, it, ko


author: Bill Nottingham <notting@redhat.com> 8.49-1
changelog:
  - rc.sysinit: remove raidautorn (#219226)
  - ifup-eth: set MACADDR, MTU before initializing bonding slaves, etc (#218792)
  - translation updates: mr, ms, hi, te, ml


author: Bill Nottingham <notting@redhat.com> 8.48-1
changelog:
  - add a step to rename any temporarily renamed devices (#208740, #214817)
  - make sure network modules don't get accidentally reloaded (#211474)
  - rc.sysinit: fix dmraid test (#216334)
  - init.d/halt: don't unmount network filesystems
  - ipsec: Add a way to manually manage racoon.conf (#159343, <mitr@redhat.com>)
  - sysconfig.txt: Document ~/.i18n (#199323, <mitr@redhat.com>)
  - some translation updates


author: Bill Nottingham <notting@redhat.com> 8.47-1
changelog:
  - lang.{sh,csh}: handle sinhalese as well in CJKI clauses (#212438)
  - rc.sysinit: add '--auto=yes' to mdadm invocation (#213671)
  - rename_device: fix incorrect handling of .bak files
  - mount tmpfs with -n (#213132)
  - various SUBCHANNELS related s390 fixage (#204803)
  - lang.{sh,csh}: support iso-8859-8 (#212738, <matan@svgalib.org>)


author: Bill Nottingham <notting@redhat.com> 8.46-1
changelog:
  - ifup-eth: restorecon on moved lease file
  - rc.sysinit: handle "nodmraid" and "nompath" command line options (#209377, <pjones@redhat.com>)
  - revert early-login support (#210836, essentially)
  - blacklist CJKI on the virtual console (#120819)
  - rc.sysinit: use dmraid.static (#211297)
  - use sysfs interface for bonding (#202443, <agospoda@redhat.com>)
  - use /etc/statetab, /etc/statetab.d for local state (#211839, <markmc@redhat.com>)
  - fix or_IN and similar locales (#212219)
  - use SUBCHANNELS as the primary key for s390 network devices (#204803)
  - translation updates


author: Bill Nottingham <notting@redhat.com> 8.45-1
changelog:
  - lang.csh/lang.sh - do *not* stty iutf8; too much chaos with SIGTTOU
    (reverts: #186961; fixes #209469)
  - translation updates: ms


author: Bill Nottingham <notting@redhat.com> 8.44-1
changelog:
  - separate tmpfs-usage for state from readonly-root
  - set keymap correctly in non-utf8 locale (#167363)
  - setsysfont: run unicode_stop if in non-unicode locale
  - lang.csh/lang.sh: set iutf8 if appropriate (#186961)
  - lang.csh/lang.sh: handle non-utf8 locales correctly (#200100)
  - rc.sysinit: redirect stderr from setsysfont (#209204, indirectly)
  - rwtab: fix iscsi file location (#208864)
  - translation updates: el, da, as, or
  - fix stateless updates (#206331, <law@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.43-1
changelog:
  - move ccwgroup initialization to a udev rule (should fix #199139,
    - init.d/functions: don't write to gdmfifo
  - remove unused-since-RHL-7 consolechars code, update docs (#206106)
  - stateless updates (#206331, <law@redhat.com>)
  - translation updates (el, ms, hr, sl)


author: Bill Nottingham <notting@redhat.com> 8.42-1
changelog:
  - run rc.sysinit, /etc/rc in monitor mode (part of #184340)
  - use a better check for 'native' services (#190989, #110761, adapted
    from <matthias@rpmforge.net>)


author: Bill Nottingham <notting@redhat.com> 8.41-1
changelog:
  - fix network ipv6 hang (#207137, others)
  - rc.sysinit: change blkid.tab path to /etc/blkid/blkid.tab
  - rename_device: reset DEVPATH also when renaming (#206884, <phil@fifi.org>)
  - sysconfig.txt: clarify onboot/onparent usage


author: Bill Nottingham <notting@redhat.com> 8.40-1
changelog:
  - translation updates
  - rename_device: use '__tmpXXXX' instead of 'devXXXX' as a temporary device
    name to avoid any realistic namespace clashes
  - rc.sysinit: set default affinity if specified on commandline (#203359)
  - always pass path to '.' (#206035)
  - run setsysfont, loadkeys always when /dev/tty{0,1} exist (#150769)
  - allow going to a shell when system is shut down cleanly (from <dwalsh@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.39-1
changelog:
  - translation updates
  - Handle partitions on multipath/dmraid better (<pjones@redhat.com>)
  - make /dev/mapper/control ourselves (<pjones@redhat.com>)
  - init.d/network: simplify 'status' call
  - fix actual 169.254 networks (#203591)
  - rc.sysinit: don't run vgscan (#191879)
  - init.d/halt: don't umount /dev/root<foo> (<oblin@mandriva.com>)
  - rc.sysinit: catch more dmraid errors (#200683)
  - support 'tmp' option in /etc/crypttab (#201382, <mitr@redhat.com>,
    <lv@lekv.de>)
  - IPv6 updates (<pb@bieringer.de>, includes a fix for #143452)


author: Bill Nottingham <notting@redhat.com> 8.38-1
changelog:
  - translation updates
  - bring down bonding slaves on ifdown (#199706)
  - support LINKDELAY for dhcp (#191137)
  - netfs: run multipath on netdev devices (#180977)
  - halt: use /proc/mounts instead of /etc/mtab (#198426, <mitr@redhat.com>)
  - rc.sysinit: fix getkey race (#191453, <mitr@redhat.com>)
  - spec cleanups (#188614, <kloczek@rudy.mif.pg.gda.pl>)
  - support aliases on vlan (#193133, <mitr@redhat.com>)
  - clean up ifcfg file handling (<mitr@redhat.com>, <michal@harddata.com>)
  - GRE and IPIP tunnel support (#168990, <mitr@redhat.com>,
    <razvan.vilt@linux360.ro>, <aaron.hope@unh.edu>, <sean@enertronllc.com>)
  - rc.sysinit: don't format encrypted swap always (#127378)
  - don't try to add routes to alias devices (#199825, #195656)


author: Bill Nottingham <notting@redhat.com> 8.36-1
changelog:
  - rework automatic swapon - only run if AUTOSWAP=yes, and fix errors
    (#198695, #196179, #196208)
  - redo single so it starts last in runlevel 1, and doesn't kill/start
    services itself
  - add configurable delay for killproc() (#198429, <jorton@redhat.com>)
  - fix loop in rename_device (#199242, <markmc@redhat.com>)
  - rc.sysinit: stateless updates (#197972, <law@redhat.com>)
  - support for copying dhcp leases from initramfs (#198601, <markmc@redhat.com>)
  - readonly-root: SELinux works now in the kernel, allow it
  - init.d/network: don't bring down network if root is on a network device
  - init.d/halt: don't use -i to halt; causes problems with iscsi
  - add support for routing rule-$device (#132252, <mitr@redhat.com>)
  - fix rhgb output (#192604, <tonynelson@georgeanelson.com>)
  - fix crypttab options for LUKS (#197656, <mitr@redhat.com>)
  - ipsec: various fixes & new features (#150682, #168972, <mitr@redhat.com>, <alex@milivojevic.org>)
  - ipsec: add check for IKE_METHOD (#197576, <john_smyth@mail.ru>)
  - rename_device: ignore alias devices, fix race (#186355)
  - ifup/ifdown: don't mark as %config
  - rwtab: some additions/cleanup


author: Bill Nottingham <notting@redhat.com> 8.35-1
changelog:
  - readonly root enhancments (modified from <law@redhat.com>, #193164)
  - encrypted swap, non-root filesystem support (#127378, <mitr@redhat.com, <redhat@flyn.org>)
  - clarify killproc usage (#193711, <mitr@redhat.com>)
  - document BRIDGE= (#192576, <mitr@redhat.com>)
  - rc.sysinit: allow for sulogin instead of automatic relabeling (<dwalsh@rehdat.com>)


author: Bill Nottingham <notting@redhat.com> 8.34-1
changelog:
  - link glib2 dynamically now that it's in /lib, conflict with older
    versions
  - handle cups specially when cleaning /var (#189168)
  - remove ifdown-aliases (<mitr@redhat.com>)
  - ifup-ipsec: fix key handling when only one of AH or ESP is used
    (#166257, <mituc@iasi.rdsnet.ro>)
  - IPv6 updates, including RFC 3041 support (<pb@bieringer.de>)
  - routing fixes, add METRIC support for default routes (#124045, <mitr@redhat.com>)
  - fix handling of mount points with white space (#186713, <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.33-1
changelog:
  - support for readonly root
  - rc.sysinit: remove call to zfcpconf.sh - that should be udev rules
  - ifup*: add NETWORKDELAY and LINKDELAY (#176851, <mitr@redhat.com>)
  - rc.sysinit: remove obsolete initrd code (<pjones@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.32-1
changelog:
  - netfs: fix redirect (#187505)
  - rc.sysinit add forcequotacheck (#168118, <mitr@redhat.com>)
  - functions/pidof: various fixes (#182623, others <mitr@redhat.com>)
  - add support for DHCP on bridges (#125259, <mitr@redhat.com>,
    anders@kaseorg.com>)
  - rc.sysinit: use pidof, not killall (#185429, <pjones@redhat.com>)
  - ppp fixes (#129195, #163950, #92023, <mitr@redhat.com>, <avi@argo.co.il>)
  - ifup/ifdown: unset $WINDOW (#174336, <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.30-1
changelog:
  - hotplug: don't cause modules to be reloaded on ifdown/rmmod (#179809)
  - fix endless loops in ifup/ifdown (#177792, #182466)
  - fix enabling of enforcing SELinux mode after relabel (#181893)
  - remove debugging code from ifup-bnep
  - add /proc, /sys mounting back to rc.sysinit
    Note: booting without an initrd is deprecated
  - translation updates


author: Bill Nottingham <notting@redhat.com> 8.28-1
changelog:
  - kill nash-hotplug before starting udev (<pjones@redhat.com>)
  - silence warnings on /dev/pts remount (<pjones@redhat.com>)
  - more translation updates


author: Bill Nottingham <notting@redhat.com> 8.27-1
changelog:
  - translation updates
  - lang.sh: revert fix for #176832, it's broken
  - ifup-aliases fixes (<pjones@redhat.com>,<mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.26-1
changelog:
  - revert "rc.sysinit: don't mount usbfs, libusb no longer uses it" change
  - add some ugly hacks to make sure net hotplug doesn't run after unclean
    shutdown (#177795)
  - don't mount /sys and /proc in rc.sysinit - the initrd already does
    (<pjones@redhat.com>)
  - halt: try to unmount tmpfs filesystems before swapoff (#174000,
    <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.22-1
changelog:
  - remove references to /usr/X11R6/bin (#177938)
  - rc.sysinit: fix SELinux message formatting (#178532)
  - rc.sysinit: clean cvs as well (#178539, <ville.skytta@iki.fi>)
  - init.d/halt: move halt.local so that it runs before /  is remounted r/o (#179314)
  - rc.sysinit: don't activate already active dmraids (<pjones@redhat.com>)
  - rc.sysinit: don't mount usbfs, libusb no longer uses it
  - init.d/functions: Add -p to status() (#134363, <mitr@redhat.com>)
  - init.d/functions: Separate /var/run/*.pid handling and pidof calls
    to private functions (#63440, <mitr@redhat.com>)
  - init.d/functions: update for current LSB, including -p pidfile
    (#99325, #134363, <mitr@redhat.com>, <tobias.burnus@physik.fu-berlin.de>)
  - getkey: various cleanups, add man page (#54481, <mitr@redhat.com>)
  - lang.sh: don't always call consoletype (<laroche@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.21-1
changelog:
  - move handling of network hotplug events here, add appropriate udev
    rules, obsolete hotplug
  - get rid of some path lookups (#178321, <mclasen@redhat.com>)
  - get hwaddrs from sysfs as opposed to ip | sed
  - translation updates
  - lang.sh: don't run unicode_start for subshells (#176832)
  - halt: ignore sysfs but not /sys<otherstuff> (#177612, <bnocera@redhat.com>)
  - add service(8) man page (#44857) <mitr@redhat.com>


author: Bill Nottingham <notting@redhat.com> 8.19-1
changelog:
  - Require syslog, for alternate implementations thereof (#172885)
  - Fix fsck invocation for weeding out netdev devices (#175803)


author: Bill Nottingham <notting@redhat.com> 8.17-1
changelog:
  - make sure corefile limiting works for user processes as well
    (#166511, <ville.skytta@iki.fi>)
  - ifup-routes: handle no EOF in the route file (#156972)
  - rc.sysinit: tweak mesage (#156972)
  - ifdown-eth: clean up error message (#135167)
  - rc.sysinit: call kpartx on multipath devices (#160227)
  - ifup-eth: move wireless options before bridge options (#122801)
  - ifup-wireless: silence error (#90601)
  - init.d/functions: change translated string (#54682)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - kmodule: don't probe for uninteresting devices. speeds things up
  - network-functions: deal with broken networks better (#168947)
  - rc.sysinit: automatically reboot if labels are really out of date
    (<dwalsh@redhat.com>)
  - network-functions: throw out nameif error messages
  - rc.sysinit: use multipath.static (#168321)
  - rc.sysinit: use ignorelocking (#168195)


author: Bill Nottingham <notting@redhat.com> 8.12-1
changelog:
  - ifup-eth: fix interface renaming (#158774)
  - rc.sysinit: use modprobe, not insmod (#159120, <tmus@tmus.dk>)
  - remove workaround for the fonts-not-initialized-on-secondary-consoles
    problem (fixed in 2.6.12-rc4 and later)
  - setsysfont: correctly bracket systfontacm (#159706)
  - rc.sysinit: always use udevsend, even if no modules (#160987)
  - ifdown-aliases: add 'cd' to the proper dir (#161170)
  - add diskdump restore support (<tuchida@redhat.com>),
    conflict with appropriate diskdumputils
  - rc.sysinit: dmraid/multipath support
    - remove LVM1 support
  - init.d/functions: handle odd quoting in args (#161316, <stransky@redhat.com>)
  - ifup-wireless: set rate in quotes (#163123)
  - handle lvm & fsck for network block devices (#148764,
    <alewis@redhat.com>)
  - initlog: fix invalid free calls,  (#165033), (#163973,<dwalsh@redhat.com>)
  - sysconfig.txt: remove hdparm docs, since the code isn't there (#162962)
  - updated translations: ms, ja, ko, et, zh_CN, zh_TW, sr, ar


author: Bill Nottingham <notting@redhat.com> 8.11-1
changelog:
  - fix mis-bringup of interfaces due to accidentally matched HWADDR
    (a.k.a. ONBOOT=no not working) (#153669, #157252)
  - support automatic relabeling later if rebooted w/o SELinux
    (<dwalsh@redhat.com>)
  - rc.sysinit: fix fixfiles invocation (#157182)
  - btmp should be 0600 (#156900)
  - translation updates: fr, bg, ru, mk, pa, es


author: Bill Nottingham <notting@redhat.com> 8.09-1
changelog:
  - rc.sysinit: clean up screen sockets (#155969)
  - functions: use pidof -c in various functions
  - ifup-ppp: fix static routes with ppp demand dialing (#20142,
    <ohrn+redhat@chalmers.se>)
  - add btmp support (#155537)
  - don't send dhcp hostname (revert of fix for #149667)
  - more early-login modifications (<mclasen@redhat.com>)
  - functions: fix echo (#155270)


author: Bill Nottingham <notting@redhat.com> 8.08-1
changelog:
  - update translation base
  - automatically send hostname for DHCP if it's available and not
    overridden (#149667)
  - load user-defined module scripts from /etc/sysconfig/modules at
    boot (#123927)
  - halt: reverse sort the mount list, avoiding errors
    (#147254, <jamesodhunt@hotmail.com>)
  - ifup-wireless: add SECURITYMODE (#145407)
  - network-functions: don't error out if hotplug doesn't exist (#140008)
  - ifup: always return errors on trying to bring up nonexistent devices (#131461)
  - ifup: fix error message (#143674)
  - rc.sysinit: add a autorelabel boot target (#154496)
  - prefdm: if something else is specified as $DISPLAYMANAGER, try that (#147304)
  - remove support for the old firewall type
  - network: optimize some (#138557, <drepper@redhat.com>)
  - prefdm: fix prefdm arg handling (#154312, <khc@pm.waw.pl>)
  - gdm early-login support (adapted from <rstrode@redhat.com>)
  - ifup-routes: make sure commented lines are handled correctly (#154353,
    - some sysconfig.txt updates (<link@pobox.com>, <jvdias@redhat.com>)
  - rc.sysinit: fix restorecon invocation (#153100)
  - initlog: free some of the more egregious memory leaks (#85935)
  - initlog: fix potential memory overread (#153685, <in-redhat@baka.org>)
  - remove some conflicts, %post scripts, etc. that were only relelvant
    for upgrades from pre-7.0
  - other minor fixes, see ChangeLog


author: Bill Nottingham <notting@redhat.com> 8.06-1
changelog:
  - handle alternate VLAN naming schemes (#115001, <kas@informatics.muni.cz>)
  - ifup-ipsec: handle non-ascii keys (#150552)
  - add proper ipsec route (#146169, #140654)
  - add a restorecon for /tmp to rc.sysinit
  - document ONHOTPLUG in sysconfig.txt
  - fix mistranslation (#151120)
  - don't return 1 for stopping a process if it isn't running at all
  - don't explicitly set fwd polices for ipsec traffic. Let setkey
    handle it.


author: Bill Nottingham <notting@redhat.com> 8.05-1
changelog:
  - ipv6 cleanups (<pb@bieringer.de>)
  - rc.sysinit: fix rngd check (#130350)
    ... then turn it off entirely
  - rc.sysinit: get rid of duplicate date printout (#149795)
  - ifdown: handle being called on down devices better
  - handle saved resolv.conf on all device types
  - fix network-functions cleanup
  - netfs: fix _netdev unmounting (#147610, <alewis@redhat.com>)
  - dhcp release cleanups (<jvdias@redhat.com>)
  - ifup-bnep: bluetooth update <dwmw2@infradead.org>
  - more ipsec stuff (#147001, <ckjohnson@gwi.net>)


author: Bill Nottingham <notting@redhat.com> 8.04-1
changelog:
  - split out ifup/ifdown general case to ifup/ifdown-eth;
    add ifup/ifdown-bnep (<dwmw2@redhat.com>)
  - ifup-ipsec: add fwd policies (#145507)
  - fix multiple scsi_hostadapter loads (#145432)
  - enable syncookies in sysctl.conf (#145201)


author: Bill Nottingham <notting@redhat.com> 8.03-1
changelog:
  - use udevsend to handle hotplug events (requires recent udev)
  - remove pump, dhcpcd support
  - fix ONxxx (#136531, <cww@redhat.com>)
  - fix various fgreps to not catch commented lines (#136531, expanded
    from <cww@redhat.com>)
  - set ETHTOOL_OPTS on addressless devices (#144682, <mpoole@redhat.com>)
  - kill dhcp client even if BOOTOPROTO is now static (#127726, others)
  - replace the use of route/ifconfig with ip in IPv6 code, remove support
    for ipv6calc (<pb@bierenger.de>, <pekkas@netcore.fi>)
  - fix quoting in daemon() (#144634)
  - make sysctl be silent (#144483)


author: Bill Nottingham <notting@redhat.com> 8.02-1
changelog:
  - remove initlog, minilogd
  - add a flag to kmodule for use with kudzu's socket mode, use it
  - change setting of IPv6 default route (#142308, <pb@bieringer.de>)
  - netfs: don't unmount NFS root FS (#142169)


author: Bill Nottingham <notting@redhat.com> 7.98-1
changelog:
  - various kmodule speedups
  - rc.d/init.d/netfs: don't mount GFS (#140281)
  - fix various minilogd bogosities (#106338)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix check_link_down to still check negotiation if link is
    listed as "up" on entering (#110164, <dbaron@dbaron.org>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - take an axe to rc.sysinit:
    - remove delay on unclean startup
    - remove hdparm code
    - remove LVM1 code
    - remove old raidtab code in favor of mdadm
    - remove support for old isapnp tools
    - move all block device mangling before fsck. run fsck *once*, not twice
    - some more LC_ALL=C stuff


author: Florian La Roche <laroche@redhat.com>
changelog:
  - /etc/rc.d/rc: use "LC_ALL=C grep" for small speedup
  - /etc/rc.d/rc.sysinit:
    - do not read udev.conf, this seems to be all in the start_udev script
    - fix detection of "nomodules" kernel command line option
    - read /proc/cmdline earlier and convert rhgb to use that, too
    - load_module(): change redirection to /dev/null
    - some checks for RHGB_STARTED="" looked strange
  - /etc/sysconfig/network-scripts/ifup-ppp:
    - remove a call to basename with shell builtins
  - /etc/sysconfig/network-scripts/network-functions:
    - remove some calls to basename/sed with shell builtins


author: Bill Nottingham <notting@redhat.com> 7.93.2-1
changelog:
  - fix prefdm fallback to installed display managers (#137274)
  - fix incorrect rhgb temporary path (#137391)


author: Bill Nottingham <notting@redhat.com> 7.91-1
changelog:
  - rc.d/rc.sysinit: remove devlabel call
  - mdadm support, now that raidtools is gone (#126636, #88785)
  - call ipv6to4 scripts in /etc/ppp/(ip-up|ip-down) (#124390, <dwmw2@redhat.com>)
  - cleanup a couple of nits that could affect bug #134754
  - make sure we return to rhgb after fsck (#133966, #112839, #134449)
  - automatically reboot when fsck calls for it, instead of requiring
    manual intervention (#117641 and duplicates)
  - ifup-wireless: fix key for open vs. restricted (#135235, <dax@gurulabs.com>)
  - translation updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - use runuser instead of su; require it
  - init.d/halt: use right file name for random seed (#134432)


author: Bill Nottingham <notting@redhat.com> - 7.86-1
changelog:
  - use /etc/hotplug/blacklist to blacklist modules in hardware init (#132719)
  - filter indic locales on the console (#134198)


author: Bill Nottingham <notting@redhat.com> - 7.85-1
changelog:
  - ifup, network-functions: fix worked-by-accident shell quoting
  - lang.csh: remove setting of dspmbyte (#89549, <mitr@redhat.com>)
  - SELinux fixes
  - clean up prefdm
  - init.d/functions: export LC_MESSAGES (#133786)
  - allow daemon to coredump if requested (#130175)
  - network-functions: be more liberal in what we accept for link types (#90602, #127984)
  - fix overzealousness with -range aliases (#65415)
  - rc.sysinit: use s-c-keyboard, not kbdconfig (#133929)
  - fix checkpid logic, clean up potential errors (#134030)
  - translation updates


author: Bill Nottingham <notting@redhat.com> - 7.82-1
changelog:
  - fix handling of nonexistent devices (#132839)
  - rhgb enhancements (<veillard@redhat.com>, #132665)
  - initscripts.spec: require nash (#132513)
  - translation updates


author: Dan Walsh <dwalshg@redhat.com> - 7.78-2
changelog:
  - fix setting SELinux contexts on udev-created-in-initrd devices
  - Let restorecon check if selinux is enabled.


author: Bill Nottingham <notting@redhat.com> - 7.77-1
changelog:
  - mount usbfs (#131347)
  - start any automatic raid devices
  - remove triggers for ancient releases, bulletproof remaining ones (#131356)


author: Jason Vas Dias <jvdias@redhat.com> 7.73-1
changelog:
  - Add support for running the DHCPv6 client to ifup
  - (new DHCPV6C=yes/no ifcfg-${IF} variable) + update sysconfig.txt


author: Bill Nottingham <notting@redhat.com> 7.70-1
changelog:
  - autoload hardware modules on startup
  - minor fsck cleanup (#115028, <leonard-rh-bugzilla@den.ottolander.nl>)
  - ifup: support STP bridging (#123324)
  - rc.sysinit: do a SELinux relabel if forced
  - rc.sysinit: remove devfs compat and the remaining 2.4 compat
  - ifup-wireless: support multiple keys (#127957)
  - fix firmware loading (#129155, <bnocera@redhat.com>)


author: Jason Vas Dias <jvdias@redhat.com> 7.67-1
changelog:
  - fix change_resolv_conf: if pre-existing /etc/resolv.conf
  - non-existent or empty, replace with new file contents.


author: Jason Vas Dias <jvdias@redhat.com> 7.66-1
changelog:
  - Allow users to use generic /etc/dhclient.conf if per-device
  - /etc/dhclient-${DEVICE}.conf is non-existent or empty


author: Bill Nottingham <notting@redhat.com> 7.62-1
changelog:
  - fix up resolv.conf munging (#129921)
  - use rngd if available
  - run start_udev if necessary (#120605)
  - readonly root updates (#129893, <markmc@redhat.com>)
  - ifup-wireless: quote key (#129930)
  - remove rawdevices (#130048)
  - handle binfmt_misc in rc.sysinit for the case where it's built in (#129954)
  - remove mkkerneldoth
  - don't remove linguas in lang.* (part of #9733)
  - fix nfs unmounting (#129765)
  - fix URL (#129433)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix bonding + no IP (#127285)
  - wrap second LVM initialization in vgscan check to avoid extraneous messages (#127639)


author: Bill Nottingham <notting@redhat.com> 7.59-1
changelog:
  - set context on ICE directory after making it (#127099, <concert@europe.com>)
  - don't mount GFS filesystems in rc.sysinit


author: Bill Nottingham <notting@redhat.com> 7.58-1
changelog:
  - rc.d/rc.sysinit: hack: make ICE directory on boot (#86480)
  - set devicetype for xDSL (#126194)
  - ignore locking failures when starting lvm volumes (#126192, <radu@primit.ro>)
  - unset LC_MESSAGES for rhgb (#126020, <ynakai@redhat.com>)
  - bonding fixes
  - setsysfont: remove error (#100559)
  - remove duplicate setting of network routes (#125450)
  - vlan fixes (#107504, <hrunting@texas.net>)
  - ifup-aliases: remove bogus route setting (#120908)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix bridging confusing module order (#122848, <luto@myrealbox.com>)
  - rc.d/rc.sysinit: don't mount cifs (#122501)


author: Bill Nottingham <notting@redhat.com> 7.51-1
changelog:
  - get rid of LVM error when no volumes are defined (#121197)
  - fix selinux short-circuit test (#121143, <michal@harddata.com>)
  - /dev/mapper/control is a special file, check it accordingly (#121963)
  - support ETHTOOL_OPTS on bonding slaves (#119430, <hrunting@texas.net>)
  - handle multiple spaces correctly in rc.sysinit, network-functions
    (#118583, <pallas@kadan.cz>)
  - cleanup fd leaks, mem leaks, other bogosities
    (#119987, <linux_4ever@yahoo.com>)
  - rc.d/init.d/network: remove ipv6 bogosity (#114128)
  - translation updates


author: Bill Nottingham <notting@redhat.com> 7.50-1
changelog:
  - fix LVM issues in rc.sysinit (#120458, #119975)
  - deal with fixed racoon parser
  - translation updates from translators
  - fix USB loading (#120911)


author: Bill Nottingham <notting@redhat.com> 7.49-1
changelog:
  - use alsa for mixer saving in halt
  - don't umount /proc in halt (#118880)
  - various translation updates from translators


author: Bill Nottingham <notting@redhat.com> 7.47-1
changelog:
  - translation: catch more input strings (#106285, <mitr@volny.cz>)
  - remove autologin from prefdm (#108969)
  - return to rhgb after ./unconfigured (#109807, <jkeating@j2solutions.net>)
  - handle iso15 in setsysfont (#110243)
  - clean up samba & vmware in rc.sysinit (#113104)
  - some sysconfig.txt documentation (#110427, #118063)
  - fix bug in umount-on-halt (#113088, <giardina@airlab.elet.polimi.it>)
  - handle CIFS in netfs (#115691)
  - make sure hotplug isn't stuck unset (#116666, <aoliva@redhat.com>)
  - handle network fs better in rc.sysinit (#111290)
  - nomodules applies to usb/firewire too (#113278)
  - ipsec fix (#116922, <felipe_alfaro@linuxmail.org>)
  - make sure rc exits cleanly (#117827, <enrico.scholz@informatik.tu-chemnitz.de>)
  - fsck root FS from initrd, for dynamic majors (#117575, <sct@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.44-1
changelog:
  - NFSv4 support (<chucklever@bigfoot.com>, <steved@redhat.com>)
  - handle 2.6-style 'install ethX ...' lines correctly
  - mount sysfs by default
  - time to clean up the cruft. remove:
    - boot-time depmod
    - linking of /boot/System.map to /boot/System.map-`uname -r`
    - /var/log/ksyms.X
    - libredhat-kernel support


author: Bill Nottingham <notting@redhat.com> 7.31-1
changelog:
  - fix bonding + dhcp (#91399)
  - fix typo (#103781)
  - sysconfig/network-scripts/ifup: fix use of local

  - fix shutdown with NFS root (#100556, <Julian.Blake@cern.ch>)
  - remove /var/run/confirm when done with /etc/rc (#100898)
  - ipcalc: fix some memory handling (#85478, <miked@ed.ac.uk>)
  - handle sorting > 10 network devices (#98209)
  - unset ONPARENT after use (#101384)
  - random other fixes
  - bridging support (<dwmw2@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.29-1
changelog:
  - setsysfont: don't echo to /dev/console (#102004)
  - fix ethernet device renaming deadlock (#101566)
  - consoletype: don't return 'vt' on vioconsole (#90465)
  - ifup: fix short-circuit (#101445)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - ifup-routes: pass the interface name to handle_file() so that we don't try
    to use the routes file's name as an interface name


author: Bill Nottingham <notting@redhat.com> 7.27-1
changelog:
  - add a check to consoletype for the current foreground console
  - use it when running unicode_start (#98753)


author: Bill Nottingham <notting@redhat.com> 7.26-1
changelog:
  - ipsec support (see sysconfig.txt, ifup-ipsec)
  - read $CONFIG.keys, for non-world-readable keys
  - allow default window size for routes to be set with WINDOW= (#98112)
  - support setting device options with ethtool opts
  - fix s390 bootup spew (#98078)
  - support renaming interfaces with nameif based on hwaddr


author: Bill Nottingham <notting@redhat.com> 7.25-1
changelog:
  - fix DNS punching in the case of other rules for the DNS server
    (#97686, <martin@zepler.org>)
  - initlog, ppp-watch, and usernetctl tweaks (<linux_4ever@yahoo.com>)
  - fix grep for mingetty (#97188)
  - fix rhgb-client bad syntax
  - change network device searching, use correct naming, fix route issues
    (<harald@redhat.com>)
  - other random tweaks


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - initscripts-s390.patch: remove not needed parts about PNP=
  - inittab.390: sync with normal version
  - rc.sysinit: remove two further calls to /sbin/consoletype with $CONSOLETYPE


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - sysconfig/init.s390: set LOGLEVEL=3 as for other archs
  - rc.d/init.d/network, rc.d/rc: change confirmation mode to
    not use an environment variable
  - rc.d/init.d/functions: make strstr() even shorter, remove old
    "case" version that has been already commented out
  - rc.d/rc.sysinit:
    - no need to set NETWORKING=no, it is not used/exported
    - do not export BOOTUP
    - delete two "sleep 1" calls that wants to add time to go
      into confirmation mode. There is enough time to press a
      key anyway or use "confirm" in /proc/cmdline.
    - read /proc/cmdline into a variable
    - use strstr() to search in /proc/cmdline
    - add "forcefsck" as possible option in /proc/cmdline
    - while removing lock files, no need to call `basename`
    - add unamer=`uname -r` and reduce number of forks
    - do not fork new bash to create /var/log/ksyms.0


author: Karsten Hopp <karsten@redhat.de> 7.15-1
changelog:
  - Mainframe has no /dev/ttyX devices and no mingetty, don't
    initialize them. This gave error messages during startup


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - init.d/network: don't advertise "probe: true" in the header if we don't
    recognize "probe" as an argument


author: Bill Nottingham <notting@redhat.com> 7.09-1
changelog:
  - initialize two ttys past # of mingettys (for GDM)
  - fix zeroconf route
  - redhat-config-network writes $NAME.route for some static routes
    (e.g., ppp); handle that (#84193)


author: Bill Nottingham <notting@redhat.com> 7.08-1
changelog:
  - load keybdev & mousedev even if hid is already loaded/static
  - run fewer scripts through action (#49670, #75279, #81531)


author: Bill Nottingham <notting@redhat.com> 7.07-1
changelog:
  - fix nicknames & profiles (#82246)
  - fix check_device_down (#83780, <pzb@datstacks.com>)
  - vlan fixes (<tis@foobar.fi>)
  - fix groff macros (#83531, <tsekine@sdri.co.jp>)
  - various updated translations
  - fix checkpid for multiple pids (#83401)


author: Bill Nottingham <notting@redhat.com> 7.04-1
changelog:
  - tweak some translatable strings
  - fix for rc.sysinit on machines that pass arguments to mingetty
    (<nalin@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.03-1
changelog:
  - move system font setting sooner (<milan.kerslager@pslib.cz>)
  - fix link checking for dhcp, use both ethtool and mii-tool
  - fix CJK text on the console, and locale-archive held open
    on shutdown
  - IPv6 updates <pekkas@netcore.fi>, <pb@bieringer.de>
  - speedup tweaks (<drepper@redhat.com>)
  - use glib2 for ppp-watch (#78690, <kisch@mindless.com>)
  - add zeroconf route (#81738)
  - fix ifup-ppp for dial-on-demand, and onboot (<goeran@uddeborg.pp.se>)
  - tweak raidtab parsing, don't worry about not-in-fstab RAID devices
    (#71087, #78467, <aja@mit.edu>)
  - don't automatically bring up aliases if 'ONPARENT=no' is set (#78992)
  - getkey cleanups/tweaks (#76071, <ben@enchantedforest.org>)
  - rework halt_get_remaining (#76831, <michal@harddata.com>)
  - ipcalc: fix calculation of /32 addresses (#76646)
  - various other tweaks and fixes


author: Bill Nottingham <notting@redhat.com> 7.00-1
changelog:
  - tweaks for potential GUI bootup
  - loop checking for network link state, don't unilterally wait five
    seconds


author: Bill Nottingham <notting@redhat.com> 6.97-1
changelog:
  - IPv6 update (<pekkas@netcore.fi>, <pb@bieringer.de>)
  - devlabel support (<Gary_Lerhaupt@Dell.com>)
  - do lazy NFS umounts


author: Bill Nottingham <notting@redhat.com> 6.96-1
changelog:
  - fix various static-routes brokeness (#74317, #74318, #74320, #76619,
    - fix handling of SYSFONTACM in setsysfont (#75662)
  - fix lang.csh for CJK (#76908, <ynakai@redhat.com>)
  - IPv6 update (<pekkas@netcore.fi>, <pb@bieringer.de>)
  - other minor tweaks


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't infinite loop on ifdown
  - remove disabling of DMA; this can cause problems
  - move swap startup to after LVM (#66588)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't cycle through eth0-eth9 on dhcp link check (#68127)
  - don't retry indefinitely on ppp startup
  - activate network profile passed on kernel commandline via netprofile=
  - fix iptables invocations again
  - translation refresh


author: Bill Nottingham <notting@redhat.com>
changelog:
  - require /etc/redhat-release (#68903)
  - fix tty2-tty6 (sort of)
  - fix iptables invocations (#70807, #71201, #68368)
  - other minor tweaks


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - /sbin/service: set PATH before calling startup scripts
    HOME and TERM are also set during bootup, but they should not make
    a difference for well-written daemons.


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - /etc/init.d/functions:
    daemon(): avoid starting another bash
    killproc(): avoid starting another bash for the default case
  - do not call "insmod -p" before loading the "st" module


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - allow an option for ups poweroff  #68123
  - change grep for ONBOOT=  #63903
  - allow building with a cross-compiler  #64362,#64255
  - faster check in network-functions:check_default_route()
  - better checks for backup files
  - drastically reduce the number of consoletype invocations
  - do not export "GATEWAY" in network-functions
  - code cleanups in rc.sysinit


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - rc.sysinit: do not load raid modules unless /etc/raidtab exists
  - many cleanups for more consistent shell programming and also
    many smaller speedups within network scripts, no un-necessary sourcing
    of files etc
  - nearly re-code /etc/rc.d/rc


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - start some sh coding cleanups
  - change to /etc/init.d/functions
  - eliminate some un-necessary PATH settings
  - eliminate some TEXTDOMAIN settings


author: Bill Nottingham <notting@redhat.com> 6.64-1
changelog:
  - make sure chatdbg is set before using it (#63448, <Bertil@Askelid.com>)
  - allow tweaking of more devices with hdparm (#53511), and
    tweak non-disk devices iff they explicitly have a config file
    for that device (#56575, #63415)
  - some translation updates


author: Bill Nottingham <notting@redhat.com> 6.63-1
changelog:
  - ipcalc cleanups (#58410)
  - quit stripping binaries
  - do LVM init after RAID init too (#63238)
  - export all locale variables (#56142)
  - run sysctl -p after network init as well


author: Bill Nottingham <notting@redhat.com> 6.62-1
changelog:
  - delete X/VNC locks on startup (#63035)
  - shut up DMA disabling, move it to after ide-scsi (#62873, #62956)
  - use full path to /sbin/ifconfig (#59457)
  - /sbin/service: change to root directory before staring/stopping;
    also sanitize environment


author: Bill Nottingham <notting@redhat.com> 6.56-1
changelog:
  - use nameif for interfaces where we don't agree on HWADDR with the
    config file (<harald@redhat.com>)
  - LSB support tweaks


author: Mike A. Harris <mharris@redhat.com> 6.55-1
changelog:
  - Removed process accounting stuff from rc.sysinit and halt scripts as it is
    now handled by the psacct initscript in the psacct package


author: Than Ngo <than@redhat.com>
changelog:
  - add ISDN patches from pekkas@netcore.fi and pb@bieringer.de (bug #52491)
  - fix handling of ISDN LSZ Compresssion


author: Bill Nottingham <notting@redhat.com> 6.31-1
changelog:
  - message un-tweaks (<johnsonm@redhat.com>)
  - make getkey more useful, fix some of the autofsck stuff (<johnsonm@redhat.com>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix a broken call to check_device_down
  - make all loopback addresses have host scope, not global scope.
    Fixes #49374, possibly others


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add is_available() network function, use it; cleans up ugly modprobe
    error messages
  - update translation info
  - fix #51787


author: Than Ngo <than@redhat.com>
changelog:
  - don't set MSN if it' empty (it's now optional)
  - don't give login name as a cmdline-option (Bug #23066)
  - remove peer device file if ppp connection is down
  - fix channel bundling


author: Bill Nottingham <notting@redhat.com>
changelog:
  - tweak raittab grep slightly (#51231)
  - allow resetting of default route for DHCP addresses (#48994)
  - save resolv.conf in ifup-ppp for restoration by ifdown-post (#50759)
  - when munging firewall rules for dns, only allow dest ports 1025-65535 (#44038, #40833)
  - allow shell characters in ppp names (#43719)
  - allow setting DHCP arguments, just kill dhcpcd instead of using -k (#46492)
  - behave sanely if ifup called when dhcpcd is running (#49392, #51038)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - honor HOTPLUG=no if running under hotplug (#47483)
  - use awk, not grep, for modprobe -c checks (#49616)
  - don't print ugly messages for the case where the device doesn't exist,
    and there is no alias (i.e., PCMCIA ONBOOT=yes (#various))
  - run kbdconfig in /.unconfigured mode (#43941)
  - use a bigger buffer size argument to dmesg (#44024)
  - detach loopback devices on shutdown (#43919, #45826)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't use kbd commands in setsysfont now that we've switched back to
    console-tools (#50075)
  - sleep in check_link_down; some devices require it
  - only bring link down if check_link_down fails


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update netdev stuff to use _netdev
  - IPv6 updates (<pekkas@netcore.fi>)
  - fix downing of devices with static IPs (#49777, #49783)
  - put ifcfg-lo back in the package


author: Bill Nottingham <notting@redhat.com>
changelog:
  - own some more directories
  - use -O nonetdev, require mount package that understands this
  - fix do_netreport when called as non-root
  - remove ip addresses from interfaces on ifdown
  - oops, fix ifup/ifdown


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix '--check'
  - prereq sh-utils (#43065)
  - fix some invocations of reboot/halt (#45966)
  - fix typo in ifup-wireless
  - don't muck with /etc/issue each boot
  - big IPv6 update (<pekkas@netcore.fi>)


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - disable hwclock on S390 (no such executable)
  - Fix up kernel versioning on binary-only modules (S390)
  - don't use newt scripts on S390 console


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - reenable pump, but make sure dhcpcd is the default. This
    way, upgrades of systems without dhcpcd has a better chance at
    working.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run ifup ppp0 if ppp-watch gets SIGINT (#40585, ak@cave.hop.stu.neva.ru)
  - fix do_netreport (#37716, #39603 <crlf@aeiou.pt>)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - copyright: GPL -> license: GPL
  - fix a syntax error in lang.csh
  - skip commented-out i18n configuration lines in lang.csh


author: Bill Nottingham <notting@redhat.com>
changelog:
  - IPv6 fixes (#30506)
  - make static-routes handling more sane and consistent (#29500, #29549)
  - handle multiple USB controllers *correctly*


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - usernetctl, ppp-watch: cleanups
  - netreport: use O_NOFOLLOW
  - ifup-ppp: let ppp-watch watch over demand-dialed connections (#28927)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run isapnp on isapnp-enabled 2.4 kernels (part of #29450)
  - disable hotplug during network initscript
  - don't munge wireless keys in ifup; that will be done with the
    PCMCIA wireless stuff
  - run sndconfig --mungepnp for non-native-isapnp soundcards
  - don't explicitly kill things in init.d/single, init will do it
  - don't explicitly load usb-storage; mount the usbdevfs before initializing
    host controller modules


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix some substitions in init.d/functions (fixes various killproc issues)
  - make sure ipv6 module alias is available if configured
  - fix initlog segfaults in popt when called with bogus stuff (#28140)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make pidofproc() and killproc() try to use the PID associated with the full
    pathname first before killing the daemon by its basename (for daemons that
    share the same basename, i.e. "master" in postfix and cyrus-imapd) (#19016)
  - fix status() as well


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add all save changes for s390 s390x that won't break anything
    patches are from Oliver Paukstadt @ millenux.com


author: Bill Nottingham <notting@redhat.com>
changelog:
  - modify firewall on ifup to allow any new DNS servers through (#25951)
  - don't muck with the font in lang.csh/lang.sh (#26349)
  - don't display Japanese if we aren't on a pty (#25041)
  - load ide-scsi if passed on /proc/cmdline


author: Bill Nottingham <notting@redhat.com>
changelog:
  - various init.d/functions cleanups (#10761, from <mjt@tls.msk.ru>)
  - in daemon(), only look at pidfile to determine if process is running
    (#17244, others)
  - ifup-ppp enhancements (#17388, from <ayn2@cornell.edu>)
  - ipv6 support (#23576, originally by Peter Bieringer <pb@bieringer.de>)
  - lots of other minor fixes (see ChangeLog)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add plusb support (#18892, patch from <eric.ayers@compgen.com>)
  - don't ignore RETRYTIMEOUT when we never connect (#14071, patch from
    <ak@cave.hop.stu.neva.ru>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - do LVM setup through normal initscripts mechanisms
  - ignore backup files in /etc/sysconfig/network-scripts
  - lots of .po file updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - only load sound if persistent DMA buffers are necessary
  - fix lots of bugs: #18619, #21187, #21283, #12097
  - integrate MAXFAIL option for ppp-watch
  - don't load keymaps/fonts on a serial console


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - changed hdparm section in rc.sysinit to allow different
    parameters for each disk (if needed) by copying
    /etc/sysconfig/harddisks to /etc/sysconfig/harddiskhda (hdb,hdc..)
  - fix RFE #20967


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - handle "gw x.x.x.x" as the last pair of flags in ifup-routes (#18804)
  - fix top-level makefile install target
  - make usernetctl just fall-through if getuid() == 0


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add usleep after kill -KILL in pidofproc, works around lockd issues (#14847)
  - add some fallback logic to prefdm (#16464)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't load usb drivers if they're compiled statically
  - don't call ifdown-post twice for ppp (#15285)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - remove console-tools requirement
  - in netfs, start portmap if needed
  - cosmetic cleanups, minor tweaks
  - don't probe USB controllers


author: Matt Wilson <msw@redhat.com>
changelog:
  - kill all the PreTransaction stuff
  - directory ownership cleanups, add more LSB symlinks
  - move all the stuff back in to /etc/rc.d/


author: Bill Nottingham <notting@redhat.com>
changelog:
  - tweak %pre back to a mv (rpm is fun!)
  - do USB initialization before fsck, so keyboard works if it fails


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - ifup-ppp: add hooks for demand-dialing PPP
  - functions: use basename of process when looking for its PID file


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't create resolv.conf 0600
  - don't run ps as much (speed issues)
  - allow setting of MTU
  - other minor fixes


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - check that LC_ALL/LINGUAS and LANG are set before referencing them in lang.csh
  - fix check for /var/*/news, work around for bug #9140


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - attempt to restore default route if PPP takes it over
  - man page fix for ipcalc
  - shvar cleaning
  - automate maintaining /boot/System.map symlinks


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - improvements in clone device handling
  - better signal handling in ppp-watch
  - yet another attempt to fix those rare PAP/CHAP problems


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fix more possible failed CHAP authentication (with chat scripts)
  - fix ppp default route problem
  - added ppp-watch man page, fixed usernetctl man page
  - make ifup-ppp work again when called from netcfg and linuxconf
  - try to keep ppp-watch from filling up logs by respawning pppd too fast
  - handle all linuxconf-style alias files with linuxconf


author: Bill Nottingham <notting@redhat.com>
changelog:
  - load mixer settings for monolithic sound
  - man page for ppp-watch
  - add ARP variable for ifup
  - some i18n fixes


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fix some failed CHAP authentication
  - fix extremely unlikely, but slightly possible kill-random-process
    bug in ppp-watch
  - allow DNS{1,2} in any ifcfg-* file, not just PPP, and
    add nameserver entries, don't just replace them
  - don't use /tmp/confirm, use /var/run/confirm instead


author: Bill Nottingham <notting@redhat.com>
changelog:
  - assorted brown paper bag fixes
  - check for programs/files before executing/sourcing them
  - control stop-a like magic sysrq


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - ppp-watch now always kills pppd pgrp to make sure dialers are dead,
    and tries to hang up the modem


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - add --remotename option to wvdial code
  - make sure we do not have an earlier version of wvdial that doesn't
    know how handle --remotename
  - make ppp-watch background itself after 30 seconds even if
    connection does not come up, at boot time only, so that a
    non-functional PPP connection cannot hang boot.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - new NFS unmounting from Bill Rugolsky <rugolsky@ead.dsa.com>
  - fix ifup-sl/dip confusion
  - more raid startup cleanup
  - make utmp group 22


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - use new linkname argument to pppd to make if{up,down}-ppp
    reliable -- requires ppp-2.3.9 or higher


author: Bill Nottingham <notting@redhat.com>
changelog:
  - stability fixes for initlog
  - initlog now has a config file
  - add alias speedup from dharris@drh.net
  - move netfs links
  - usleep updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't make module-info, System.map links
  - handle utmpx/wtmpx
  - fix lots of bugs in 4.21 release :)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - clean out /var better
  - let everyone read /var/run/ppp*.dev
  - fix network startup so it doesn't depend on /usr


author: Bill Nottingham <notting@redhat.com>
changelog:
  - load keymaps & console font early
  - fixes for channel bonding, strange messages with non-boot network interfaces


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run linuxconf if /usr isn't mounted
  - set macaddr before bootp
  - zero in the /var/run/utmpx file (gafton)
  - don't set hostname on ppp/slip (kills X)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - doc updates
  - support for SYSFONTACM, other console-tools stuff
  - add net route for interface if it isn't there.
  - fix for a bash/bash2 issue


author: Bill Nottingham <notting@redhat.com>
changelog:
  - Mmm. Must always remove debugging code. before release. *thwap*
  - pump support
  - mount -a after mount -a -t nfs


author: Bill Nottingham <notting@redhat.com>
changelog:
  - bugfixes (ifup-ppp, kill -TERM, force fsck, hwclock --adjust, setsysfont)
  - add initlog support. Now everything is logged (and bootup looks different)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - rc.sysvinit should be working with all kernel versions now
  - requires e2fsprogs (for fsck)
  - set INPUTRC and LESSCHARSET on linux-lat


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - /etc/rc.d/rc: don't run /etc/rc.d/rcN.d/[KS]??foo.{rpmsave,rpmorig} scripts.
  - /etc/rc.d/rc.sysinit: raid startup (Nigel.Metheringham@theplanet.net).
  - /sbin/setsysfont: permit unicode fonts.


author: Erik Troan <ewt@redhat.com>
changelog:
  - ipcalc should *never* have been setgid anything
  - depmod isn't run properly for non-serial numbered kernels


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added lots of linuxconf support.  Should still work on systems that
    do not have linuxconf installed, but linuxconf gives enhanced support.
  - In concert with linuxconf, added IPX support.  Updated docs to reflect it.


author: Erik Troan <ewt@redhat.com>
changelog:
  - touch /var/lock/subsys/kerneld after cleaning out /var/lock/subsys
  - the logic for when  /var/lock/subsys/kerneld is touched was backwards


author: Erik Troan <ewt@redhat.com>
changelog:
  - tried to get /proc stuff right one more time (uses -t nonfs,proc now)
  - added support for /fsckoptions
  - changed 'yse' to 'yes' in KERNELD= line


author: Erik Troan <ewt@redhat.com>
changelog:
  - set domainname to "" if none is specified in /etc/sysconfig/network
  - fix /proc mounting to get it in /etc/mtab


author: Erik Troan <ewt@redhat.com>
changelog:
  - fixed network-scripts to allow full pathnames as config files
  - removed some old 3.0.3 pcmcia device handling


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - /var/run/netreport needs to be group-writable now that /sbin/netreport
    is setguid instead of setuid.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added network-functions to spec file.
  - Added report functionality to usernetctl.
  - Fixed bugs I introduced into usernetctl while adding clone device support.
  - Clean up entire RPM_BUILD_ROOT directory in %clean.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Clone device support in network scripts, rc scripts, and usernetctl.
  - Disassociate from controlling tty in PPP and SLIP startup scripts,
    since they act as daemons.
  - Spec file now provides start/stop symlinks, since they don't fit in
    the CVS archive.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - reworked status() to adjust for processes that change their argv[0] in
    the process table.  The process must still have it's "name" in the argv[0]
    string (ala sendmail: blah blah).


author: Donald Barnes <djb@redhat.com>
changelog:
  - added status function to functions along with better killproc
    handling.
  - added /sbin/usleep binary (written by me) and man page
  - changed BuildRoot to /var/tmp instead of /tmp


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - /sbin/netreport sgid rather than suid.
  - /var/run/netreport writable by group root.

  - /etc/ppp/ip-{up|down} no longer exec their local versions, so
    now ifup-post and ifdown-post will be called even if ip-up.local
    and ip-down.local exist.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Support for net event notification:
    Call /sbin/netreport to request that SIGIO be sent to you whenever
    a network interface changes status (won't work for brining up SLIP
    devices).
    Call /sbin/netreport -r to remove the notification request.
  - Added ifdown-post, and made all the ifdown scrips call it, and
    added /etc/ppp/ip-down script that calls /etc/ppp/ip-down.local
    if it exists, then calls ifdown-post.
  - Moved ifup and ifdown to /sbin


author: Erik Troan <ewt@redhat.com>
changelog:
  - Added DHCP support
  - Set hostname via reverse name lookup after configuring a networking
    device if the current hostname is (none) or localhost


author: Erik Troan <ewt@redhat.com>
changelog:
  - Got rid of xargs dependency in halt script
  - Don't mount /proc twice (unmount it in between)
  - sulogin and filesystem unmounting only happened for a corrupt root
    filesystem -- it now happens when other filesystems are corrupt as well


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added MTU for PPP.
  - Put PPPOPTIONS at the end of the options string instead of at the
    beginning so that they override other options.  Gives users more rope...
  - Don't do module-based stuff on non-module systems.  Ignore errors if
    st module isn't there and we try to load it.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Changed ifup-ppp and ifdown-ppp not to use doexec, because the argv[0]
    provided by doexec goes away when pppd gets swapped out.
  - ifup-ppp now sets remotename to the logical name of the device.
    This will BREAK current PAP setups on netcfg-managed interfaces,
    but we needed to do this to add a reasonable interface-specific
    PAP editor to netcfg.


author: Erik Troan <ewt@redhat.com>
changelog:
  - Added usernetctl wrapper for user mode ifup and ifdown's and man page
  - Rewrote ppp and slip kill and retry code
  - Added doexec and man page


author: Toshio Kuratomi <toshio@fedoraproject.org> - 3.5-0.3.20090913git
changelog:
  - Make building with system zlib selectable at build time.
  - Fix cfile_detect_rsync() to detect rsync even if we don't have a zlib capable
    of making rsync-friendly compressed files.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 3.5-0.2.20090913git
changelog:
  - Correct prerelease rlease numbering.
  - Build against the system zlib, not the bundled library.  This remedies the
    fact that the included zlib is affected by CAN-2005-1849.


author: Bill Nottingham <notting@redhat.com> - 3.5-0.git.20090831.1.3
changelog:
  - fix python bindings to:
    - call _exit(), not exit()
    - properly pythonize errors
    - not leak file descriptors


author: Jonathan Dieter <jdieter@gmail.com> - 3.5-0.git.20090729.1
changelog:
  - Explain where we get the source from
  - Split *deltaiso commands into deltaiso subpackage (#501953)


author: Jonathan Dieter <jdieter@gmail.com> - 3.5-0.git.20090727
changelog:
  - Update to current upstream git repository
  - Add upstream xz compression support
  - Drop all patches (they're now in upstream)
  - Fix spelling mistakes (#505713)
  - Fix url error (#506179)


author: Jonathan Dieter <jdieter@gmail.com> - 3.4-9
changelog:
  - Add patch that allows deltarpm to rebuild rpms from deltarpms that have
    had the rpm signature added after their creation.  The code came from
    upstream.
  - Drop nodoc patch added in 3.4-4 as most packages in repository have been
    updated since April-May 2007 and this patch was supposed to be temporary.


author: Jonathan Dieter <jdieter@gmail.com> - 3.4-4
changelog:
  - Fix prelink bug
  - Ignore verify bits on doc files as they were set incorrectly in older
    versions of rpm.  Without this patch, deltarpm will not delta doc files
    in rpm created before April-May 2007


author: Jindrich Novy <jnovy@redhat.com> 0.16.17-13
changelog:
  - fix buffer overflow caused by realpath() call
  - attempt to fix type width size for 64bit arches
  - merge review fixes (#225683):
    - remove BR: gawk
    - add licenses to documentation
    - use RPM_OPT_FLAGS to compile arch dependent binaries


author: Jindrich Novy <jnovy@redhat.com> - 0.16.17-3
changelog:
  - make the dev86 spec less tragic -> use macros, don't conflict
    on multiarches, add URL, fix BuildRoot, fix rpmlint warnings


author: Donnie Barnes <djb@redhat.com>
changelog:
  - removed "Distribution:" line (was RHCN)
  - changed description and summary to the ones from bin86 with s/bin/dev/
    done throughout
  - added patch to keep from installing in /usr/bcc and simply in /usr
  - moved include files to /usr/lib/bcc/include


author: Simon Weijgers <simon@mbit.doa.org>
changelog:
  - First release of this package to be shipped to rhcn.

  - To be fixed: Bug in Makefile which installs headerfiles
    double. E.g. /usr/bcc/include/arch is also installed under
    /usr/bcc/include/arch/arch. This doesn't hinder operation,
    just eats a tiny bit of diskspace.


author: - Bastien Nocera <bnocera@redhat.com> - 0.23-3
changelog:
  - Fix displaying web pages, WebKit doesn't like local filenames as URIs
  - Add missing Gconf2-devel BR


author: Matthew Barnes <mbarnes@redhat.com> - 0.13-1.fc7
changelog:
  - Update to 0.13
  - Clean up the spec file.
  - Remove devhelp-0.12-transparent.patch (fixed upstream).


author: Christopher Aillon <caillon@redhat.com> 0.9.1-4
changelog:
  - Rebuilt to pick up new mozilla changes
  - Drop ppc from the build since mozilla doesn't build there anymore.


author: Colin Walters <walters@redhat.com> 0.9-2
changelog:
  - Apply patch from George Karabin <gkarabin@pobox.com> to
    export LD_LIBRARY_PATH (closes bug 120220).


author: Mark McLoughlin <markmc@redhat.com> 0.9-1
changelog:
  - Update to 0.9
  - Install the schemas correctly
  - Package /usr/bin/devhelp-bin
  - Update requires/buildrequires
  - Only build on platforms where mozilla is available


author: Richard Hughes <rhughes@redhat.com> - 014-1
changelog:
  - Check if swap exists before determining how much is free
  - Prevent segfault if connection to system dbus fails
  - Fix segfault in the history code.
  - Resolves: #553589


author: Richard Hughes <richard@hughsie.com> - 013-1
changelog:
  - Update to 013
  - Detect more supported UPS devices.
  - Fix the Toshiba battery recall data.
  - Fix a crash when the battery NVRAM is invalid.
  - Add a couple of fixes for very new battery support.


author: Richard Hughes <rhughes@redhat.com> - 013-0.1.20091118git
changelog:
  - Update to a git snapshot
  - Don't crash the daemon if the battery is broken. Fixes #533654
  - Avoid going from discharging to pending-discharge when the battery is very low
  - Fix the toshiba battery recall notices


author: Richard Hughes <richard@hughsie.com> - 012-1
changelog:
  - Update to 012
  - Detect encrypted swap and prevent hibernate in this case.
  - When we do a delayed refresh, actually do 5 x 1 second apart rather
    than 1 x 3 seconds which should fix some slow battery devices.


author: Richard Hughes <rhughes@redhat.com> - 011-0.1.20090914git
changelog:
  - Update to todays git snapshot to fix the session exploding when a USB UPS is
    inserted then removed a few times.


author: Richard Hughes <richard@hughsie.com> - 010-4
changelog:
  - Continue to poll when we guessed a status value, and only stop when the
    kernel says definitively that we are fully charged.


author: Richard Hughes <richard@hughsie.com> - 009-1
changelog:
  - Update to 009
  - Fixes many problems with multi-battery laptops
  - Use pm-powersave like HAL used to
  - Fix detecting UPS devices
  - Add support for recalled laptop batteries


author: Richard Hughes <rhughes@redhat.com> - 009-0.3.20090616git
changelog:
  - Do autoconf and automake as the polkit patch is pretty invasive
  - Fix up file lists with the new polkit action paths


author: Alasdair Kergon <agk@redhat.com> - 2.02.60-1
changelog:
  - Add cmirror subpackage for clustered mirrors.
  - Sleep before first progress check iff pvmove/lvconvert interval has prefix '+'.
  - Fix first syslog message prefix for dmeventd plugins.
  - Make failed locking initialisation messages more descriptive.
  - Add cman requires to cluster subpackage.
  - Set 'preferred_names' in default lvm.conf.
  - Add libdevmapper-event-lvm2.so to serialise dmeventd plugin liblvm2cmd use.
  - Stop dmeventd trying to access already-removed snapshots.
  - Fix clvmd to never scan suspended devices.
  - Fix detection of completed snapshot merge.
  - Improve snapshot merge metadata import validation.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.58-1
changelog:
  - Fix clvmd automatic target module loading crash.
  - Fix allocation code not to stop at the first area of a PV that fits.
  - Add support for the "snapshot-merge" kernel target (2.6.33-rc1).
  - Add --merge to lvconvert to merge a snapshot into its origin.
  - Disable openais and corosync support for clvmd.
    Resolves: #249478 #493055


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.57-1
changelog:
  - Add --splitmirrors to lvconvert to split off part of a mirror.
  - Allow vgremove to remove a VG with PVs missing after a prompt.
  - Add activation/udev_rules config option in lvm.conf.
  - Add --poll flag to vgchange and lvchange to control background daemon launch.
  - Impose limit of 8 mirror images to match the in-kernel kcopyd restriction.
  - Log failure type and recognise type 'F' (flush) in dmeventd mirror plugin.
  - Add --noudevrules option for dmsetup to disable /dev node management by udev.
  - Fix 'dmsetup info -c -o all' to show all fields.
  - Fix coredump and memory leak for 'dmsetup help -c'. 
  - Rename mirror_device_fault_policy to mirror_image_fault policy.
  - Use extended status of new kernel snapshot target 1.8.0 to detect when empty.
  - Allow use of precommitted metadata when a PV is missing.
  - Add global/abort_on_internal_errors to lvm.conf to assist testing.
  - If aborting due to internal error, always send that message to stderr.
  - Keep log type consistent when changing mirror image count.
  - Exit with success in lvconvert --repair --use-policies on failed allocation.
  - Ensure any background daemon exits without duplicating parent's functionality.
  - Change background daemon process names to "(lvm2)".
  - Fix internal lock state after forking.
  - Remove empty PV devices if lvconvert --repair is using defined policies.
  - Use fixed buffer to prevent stack overflow in persistent filter dump.
  - Propagate metadata commit and revert notifications to other cluster nodes.
  - Fix metadata caching and lock state propagation to remote nodes in clvmd.
  - Properly decode all flags in clvmd messages including VG locks.
  - Drop cached metadata after device was auto-repaired and removed from VG.
  - Clear MISSING_PV flag if PV reappeared and is empty.
  - Fix removal of multiple devices from a mirror.
  - Also clean up PVs flagged as missing in vgreduce --removemissing --force.
  - Fix some pvresize and toollib error paths with missing VG releases/unlocks.
  - Explicitly call suspend for temporary mirror layer.
  - Add memlock information to do_lock_lv debug output.
  - Always bypass calls to remote cluster nodes for non-clustered VGs. 
  - Permit implicit cluster lock conversion in pre/post callbacks on local node.
  - Permit implicit cluster lock conversion to the lock mode already held.
  - Fix lock flag masking in clvmd so intended code paths get invoked.
  - Remove newly-created mirror log from metadata if initial deactivation fails.
  - Improve pvmove error message when all source LVs are skipped.
  - Fix memlock imbalance in lv_suspend if already suspended.
  - Fix pvmove test mode not to poll (and fail).
  - Fix vgcreate error message if VG already exists.
  - Fix tools to use log_error when aborted due to user response to prompt.
  - Fix ignored readahead setting in lvcreate --readahead.
  - Fix clvmd memory leak in lv_info_by_lvid by calling release_vg.
  - If LVM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - If DM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - Always set environment variables for an LVM2 device in 11-dm-lvm.rules.
  - Disable udev rules for change events with DISK_RO set. 
  - Add dm_tree_add_dev_with_udev_flags to provide wider support for udev flags.
  - Correct activated or deactivated text in vgchange summary message.
  - Fix fsadm man page typo (fsdam).
    Resolves: #549870


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.56-1
changelog:
  - Update to latest upstream release with various fixes and enhancements
    detailed in WHATS_NEW.
    Resolves: #463271 #533275


author: Alasdair Kergon <agk@redhat.com> - 2.02.53-1
changelog:
  - Create any directories in /dev with umask 022. (#507397)
  - Handle paths supplied to dm_task_set_name by getting name from /dev/mapper.
  - Add splitname and --yes to dmsetup man page.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.52-3
changelog:
  - Enable udev synchronisation code.
  - Install default udev rules for device-mapper and LVM2.
  - Add BuildRequires: libudev-devel.
  - Add Requires: libudev (to check udev is running).
  - Add Requires: util-linux-ng (blkid used in udev rules).


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-2
changelog:
  - Build dmeventd and place into a separate set of subpackages.
  - Remove no-longer-needed BuildRoot tag and buildroot emptying at install.


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-1
changelog:
  - Prioritise write locks over read locks by default for file locking.
  - Add local lock files with suffix ':aux' to serialise locking requests.
  - Fix readonly locking to permit writeable global locks (for vgscan). (2.02.49)
  - Make readonly locking available as locking type 4.
  - Fix global locking in PV reporting commands (2.02.49).
  - Make lvchange --refresh only take a read lock on volume group.
  - Fix race where non-blocking file locks could be granted in error.
  - Fix pvcreate string termination in duplicate uuid warning message.
  - Don't loop reading sysfs with pvcreate on a non-blkext partition (2.02.51).
  - Fix vgcfgrestore error paths when locking fails (2.02.49).
  - Make clvmd check corosync to see what cluster interface it should use.
  - Fix vgextend error path - if ORPHAN lock fails, unlock / release vg (2.02.49).
  - Clarify use of PE ranges in lv{convert|create|extend|resize} man pages.
  - Restore umask when device node creation fails.
  - Check kernel vsn to use 'block_on_error' or 'handle_errors' in mirror table.


author: Milan Broz <mbroz@redhat.com> - 2.02.51-3
changelog:
  - Fix global locking in PV reporting commands (2.02.49).
  - Fix pvcreate on a partition (2.02.51).
  - Build clvmd with both cman and corosync support.


author: Alasdair Kergon <agk@redhat.com> - 2.02.51-2
changelog:
  - Fix clvmd locking broken in 2.02.50-1.
  - Only change LV /dev symlinks on ACTIVATE not PRELOAD (so not done twice).
  - Make lvconvert honour log mirror options combined with downconversion.
  - Add devices/data_alignment_detection to lvm.conf.
  - Add devices/data_alignment_offset_detection to lvm.conf.
  - Add --dataalignmentoffset to pvcreate to shift start of aligned data area.
  - Update synopsis in lvconvert manpage to mention --repair.
  - Document -I option of clvmd in the man page.


author: Alasdair Kergon <agk@redhat.com> - 2.02.50-1
changelog:
  - Add libs and devel subpackages to include shared libraries for applications.
    N.B. The liblvm2app API is not frozen yet and may still be changed
    Send any feedback to the mailing list lvm-devel@redhat.com.
  - Remove obsolete --with-dmdir from configure.
  - Add global/wait_for_locks to lvm.conf so blocking for locks can be disabled.
  - Fix race condition with vgcreate and vgextend on same device since 2.02.49.
  - Add an API version number, LVM_LIBAPI, to the VERSION string.
  - Return EINVALID_CMD_LINE not success when invalid VG name format is used.
  - Remove unnecessary messages after vgcreate/vgsplit code change in 2.02.49.
  - Store any errno and error messages issued while processing each command.


author: Alasdair Kergon <agk@redhat.com> - 2.02.49-1
changelog:
  - Exclude VG_GLOBAL from vg_write_lock_held so scans open devs read-only again.
  - Fix dev name mismatch in vgcreate man page example.
  - Check md devices for a partition table during device scan.
  - Add extended device (blkext) and md partition (mdp) types to filters.
  - Make text metadata read errors for segment areas more precise.
  - Fix text segment metadata read errors to mention correct segment name.
  - Include segment and LV names in text segment import error messages.
  - Fix memory leak in vgsplit when re-reading the vg.
  - Permit several segment types to be registered by a single shared object.
  - Update the man pages to document size units uniformly.
  - Allow commandline sizes to be specified in terms of bytes and sectors.
  - Update 'md_chunk_alignment' to use stripe-width to align PV data area.
  - Fix segfault in vg_release when vg->cmd is NULL.
  - Add dm_log_with_errno and dm_log_with_errno_init, deprecating the old fns.
  - Fix whitespace in linear target line to fix identical table line detection.
  - Add device number to more log messages during activation.


author: Fabio M. Di Nitto <fdinitto@redhat.com> 2.02.48-2
changelog:
  - BuildRequires and Requires on stable versions of both corosync-lib (1.0.0-1)
    and cluster-lib (3.0.0-20).


author: Alasdair Kergon <agk@redhat.com> - 2.02.48-1
changelog:
  - Abort if automatic metadata correction fails when reading VG to update it.
  - Don't fallback to default major number in libdm: use dm_task_set_major_minor.
  - Explicitly request fallback to default major number in device mapper.
  - Ignore suspended devices during repair.
  - Suggest using lvchange --resync when adding leg to not-yet-synced mirror.
  - Destroy toolcontext on clvmd exit to avoid memory pool leaks.
  - Fix lvconvert not to poll mirror if no conversion in progress.
  - Fix memory leaks in toolcontext error path.
  - Reinstate partial activation support in clustered mode.
  - Allow metadata correction even when PVs are missing.
  - Use 'lvm lvresize' instead of 'lvresize' in fsadm.
  - Do not use '-n' realine option in fsadm for rescue disk compatiblity.
  - Round up requested readahead to at least one page and print warning.
  - Try to repair vg before actual vgremove when force flag provided.
  - Unify error messages when processing inconsistent volume group.
  - Introduce lvconvert --use_policies (repair policy according to lvm.conf).
  - Fix rename of active snapshot with virtual origin.
  - Fix convert polling to ignore LV with different UUID.
  - Cache underlying device readahead only before activation calls.
  - Fix segfault when calculating readahead on missing device in vgreduce.
  - Remove verbose 'visited' messages.
  - Handle multi-extent mirror log allocation when smallest PV has only 1 extent.
  - Add LSB standard headers and functions (incl. reload) to clvmd initscript.
  - When creating new LV, double-check that name is not already in use.
  - Remove /dev/vgname/lvname symlink automatically if LV is no longer visible.
  - Rename internal vorigin LV to match visible LV.
  - Suppress 'removed' messages displayed when internal LVs are removed.
  - Fix lvchange -a and -p for sparse LVs.
  - Fix lvcreate --virtualsize to activate the new device immediately.
  - Make --snapshot optional with lvcreate --virtualsize.
  - Generalise --virtualoriginsize to --virtualsize.
  - Skip virtual origins in process_each_lv_in_vg() without --all.
  - Fix counting of virtual origin LVs in vg_validate.
  - Attempt to load dm-zero module if zero target needed but not present.
  - Add crypt target handling to libdevmapper tree nodes.
  - Add splitname command to dmsetup.
  - Add subsystem, vg_name, lv_name, lv_layer fields to dmsetup reports.
  - Make mempool optional in dm_split_lvm_name() in libdevmapper.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.47-2
changelog:
  - BuildRequire newer version of corosynclib (0.97-1) to link against
    latest libraries version (soname 4.0.0).
  - Add lvm2-2_02_48-cluster-cpg-new-api.patch to port clvmd-corosync
    to new corosync cpg API.


author: Alasdair Kergon <agk@redhat.com> - 2.02.47-1
changelog:
  - Inherit readahead setting from underlying devices during activation.
  - Detect LVs active on remote nodes by querying locks if supported.
  - Enable online resizing of mirrors.
  - Use suspend with flush when device size was changed during table preload.
  - Implement query_resource_fn for cluster_locking.
  - Support query_resource_fn in locking modules.
  - Fix pvmove to revert operation if temporary mirror creation fails.
  - Fix metadata export for VG with missing PVs.
  - Add vgimportclone and install it and the man page by default.
  - Force max_lv restriction only for newly created LV.
  - Do not query nonexistent devices for readahead.
  - Reject missing PVs from allocation in toollib.
  - Fix PV datalignment for values starting prior to MDA area. (2.02.45)
  - Add sparse devices: lvcreate -s --virtualoriginsize (hidden zero origin).
  - Fix minimum width of devices column in reports.
  - Add lvs origin_size field.
  - Implement lvconvert --repair for repairing partially-failed mirrors.
  - Fix vgreduce --removemissing failure exit code.
  - Fix remote metadata backup for clvmd.
  - Fix metadata backup to run after vg_commit always.
  - Fix pvs report for orphan PVs when segment attributes are requested.
  - Fix pvs -a output to not read volume groups from non-PV devices.
  - Introduce memory pools per volume group (to reduce memory for large VGs).
  - Always return exit error status when locking of volume group fails.
  - Fix mirror log convert validation question.
  - Enable use of cached metadata for pvs and pvdisplay commands.
  - Fix memory leak in mirror allocation code.
  - Save and restore the previous logging level when log level is changed.
  - Fix error message when archive initialization fails.
  - Make sure clvmd-corosync releases the lockspace when it exits.
  - Fix segfault for vgcfgrestore on VG with missing PVs.
  - Block SIGTERM & SIGINT in clvmd subthreads.
  - Detect and conditionally wipe swapspace signatures in pvcreate.
  - Fix maximal volume count check for snapshots if max_lv set for volume group.
  - Fix lvcreate to remove unused cow volume if the snapshot creation fails.
  - Fix error messages when PV uuid or pe_start reading fails.
  - Flush memory pool and fix locking in clvmd refresh and backup command.
  - Fix unlocks in clvmd-corosync. (2.02.45)
  - Fix error message when adding metadata directory to internal list fails.
  - Fix size and error message of memory allocation at backup initialization.
  - Remove old metadata backup file after renaming VG.
  - Restore log_suppress state when metadata backup file is up-to-date.
  - Export dm_tree_node_size_changed() from libdevmapper.
  - Fix segfault when getopt processes dmsetup -U, -G and -M options.
  - Add _smp_mflags to compilation and remove DESTDIR.


author: Alasdair Kergon <agk@redhat.com> - 2.02.45-1
changelog:
  - Update clusterlib and corosync dependencies.
  - Attempt proper clean up in child before executing fsadm or modprobe.
  - Do not scan devices if reporting only attributes from PV label.
  - Use pkgconfig to obtain corosync library details during configuration.
  - Fix error returns in clvmd-corosync interface to DLM.
  - Add --refresh to vgchange and vgmknodes man pages.
  - Pass --test from lvresize to fsadm as --dry-run.
  - Prevent fsadm from checking mounted filesystems.
  - No longer treats any other key as 'no' when prompting in fsadm.
  - Add --dataalignment to pvcreate to specify alignment of data area.
  - Fix unblocking of interrupts after several commands.
  - Provide da and mda locations in debug message when writing text format label.
  - Mention the restriction on file descriptors at invocation on the lvm man page.
  - Index cached vgmetadata by vgid not vgname to cope with duplicate vgnames.
  - No longer require kernel and metadata major numbers to match.
  - If kernel supports only one dm major number, use in place of any supplied.
  - Add option to /etc/sysconfig/cluster to select cluster type for clvmd.
  - Allow clvmd to start up if its lockspace already exists.
  - Separate PV label attributes which do not need parse metadata when reporting.
  - Remove external dependency on the 'cut' command from fsadm.
  - Fix pvs segfault when pv mda attributes requested for unavailable PV.
  - Add fsadm support for reszing ext4 filesysystems.
  - Change lvm2-cluster to corosync instead of cman.
  - Fix some old changelog typos in email addresses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.44-1
changelog:
  - Add --nameprefixes, --unquoted, --rows to pvs, vgs, lvs man pages.
  - Fix lvresize size conversion for fsadm when block size is not 1K.
  - Fix pvs segfault when run with orphan PV and some VG fields.
  - Display a 'dev_size' of zero for missing devices in reports.
  - Add pv_mda_size to pvs and vg_mda_size to vgs.
  - Fix lvmdump /sys listing to include virtual devices directory.
  - Add "--refresh" functionality to vgchange and vgmknodes.
  - Avoid exceeding LV size when wiping device.
  - Calculate mirror log size instead of using 1 extent.
  - Ensure requested device number is available before activating with it.
  - Fix incorrect exit status from 'help <command>'.
  - Fix vgrename using UUID if there are VGs with identical names.
  - Fix segfault when invalid field given in reporting commands.
  - Use better random seed value in temp file creation.
  - Add read_urandom to read /dev/urandom. Use in uuid calculation.
  - Fix race in vgcreate that would result in second caller overwriting first.
  - Fix uninitialised lv_count in vgdisplay -c.
  - Don't skip updating pvid hash when lvmcache_info struct got swapped.
  - Fix startup race in clvmd.
  - Cope with snapshot dependencies when removing a whole VG with lvremove.
  - Make man pages and tool help text consistent using | for alternative options.
  - Add "all" field to reports expanding to all fields of report type.
  - Enforce device name length and character limitations in libdm.


author: Alasdair Kergon <agk@redhat.com> - 2.02.43-1
changelog:
  - Upstream merge of device-mapper and lvm2 source.
  - Correct prototype for --permission on lvchange and lvcreate man pages.
  - Exit with non-zero status from vgdisplay if couldn't show any requested VG.
  - libdevmapper.pc: Use simplified x.y.z version number.
  - Accept locking fallback_to_* options in the global section as documented.
  - Several fixes to lvconvert involving mirrors.
  - Avoid overwriting in-use on-disk text metadata when metadataarea fills up.
  - Generate man pages from templates and include version.
  - Fix misleading error message when there are no allocatable extents in VG.
  - Fix handling of PVs which reappeared with old metadata version.
  - Fix validation of --minor and --major in lvcreate to require -My always.
  - Allow lvremove to remove LVs from VGs with missing PVs.
  - In VG with PVs missing, by default allow activation of LVs that are complete.
  - Require --force with --removemissing in vgreduce to remove partial LVs.
  - No longer write out PARTIAL flag into metadata backups.
  - Treat new default activation/missing_stripe_filler "error" as an error target.
  - Add devices/md_chunk_alignment to lvm.conf.
  - Pass struct physical_volume to pe_align and adjust for md chunk size.
  - Avoid shuffling remaining mirror images when removing one, retaining primary.
  - Prevent resizing an LV while lvconvert is using it.
  - Avoid repeatedly wiping cache while VG_GLOBAL is held in vgscan & pvscan.
  - Fix pvresize to not allow resize if PV has two metadata areas.
  - Fix setting of volume limit count if converting to lvm1 format.
  - Fix vgconvert logical volume id metadata validation.
  - Fix lvmdump metadata gather option (-m) to work correctly.
  - Fix allocation bug in text metadata format write error path.
  - Fix vgcfgbackup to properly check filename if template is used.
  - vgremove tries to remove lv snapshot first.
  - Improve file descriptor leak detection to display likely culprit and filename.
  - Avoid looping forever in _pv_analyze_mda_raw used by pvck.
  - Change lvchange exit status to indicate if any part of the operation failed.
  - Fix pvchange and pvremove to handle PVs without mdas.
  - Fix pvchange -M1 -u to preserve existing extent locations when there's a VG.
  - Cease recognising snapshot-in-use percentages returned by early devt kernels.
  - Add backward-compatible flags field to on-disk format_text metadata.
  - libdevmapper: Only resume devices in dm_tree_preload_children if size changes.
  - libdevmapper: Extend deptree buffers so the largest possible device numbers fit.
  - libdevmapper: Underline longer report help text headings.


author: Fabio M. Di Nitto <fdinitto@redhat.cm> - 2.02.39-5
changelog:
  - Add BuildRequires on cmanlib-devel. This is required after libcman split
    from cman and cman-devel into cmanlib and cmanlib-devel.
  - Make versioned BuildRequires on cman-devel and cmanlib-devel more strict
    to guarantee to get the right version.


author: Alasdair Kergon <agk@redhat.com> - 2.02.39-3
changelog:
  - Fix up cache for PVs without mdas after consistent VG metadata is processed.
  - Update validation of safe mirror log type conversions in lvconvert.
  - Fix lvconvert to disallow snapshot and mirror combinations.
  - Fix reporting of LV fields alongside unallocated PV segments.
  - Add --unquoted and --rows to reporting tools.
  - Avoid undefined status code after _memlock commands in lvm shell.
  - Fix and improve readahead 'auto' calculation for stripe_size.
  - Fix lvchange output for -r auto setting if auto is already set.
  - Fix add_mirror_images not to dereference uninitialized log_lv upon failure.
  - Add --force to lvextend and lvresize.
  - Fix vgchange to not activate component mirror volumes directly.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-2
changelog:
  - dmsetup: Add --unquoted and --rows to 'info -c' command.
  - libdevmapper: Fix inverted no_flush debug message.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-1
changelog:
  - libdevmapper: Make dm_hash_iter safe against deletion.
  - libdevmapper: Accept a NULL pointer to dm_free silently.
  - libdevmapper: Calculate string size within dm_pool_grow_object.
  - libdevmapper: Send reporting field help text to stderr not stdout.

  - dmsetup: Add tables_loaded, readonly and suspended columns to reports.
  - dmsetup: Add --nameprefixes for new report output format FIELD=VALUE.

  - Add --nameprefixes to reporting tools for field name prefix output format.
  - Fix return values for reporting commands when run with no PVs, LVs, or VGs.
  - Add omitted unlock_vg() call when sigint_caught() during vg processing.
  - Fix free_count when reading pool metadata.
  - Fix segfault when using pvcreate on a device containing pool metadata.
  - In script-processing mode, stop if any command fails.
  - Warn if command exits with non-zero status code without a prior log_error.
  - Correct config file line numbers in messages when parsing comments.
  - Add missing deactivation after activation failure in lvcreate -Zy.
  - When removing LV symlinks, skip any where the VG name is not determined.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Avoid spurious duplicate VG messages referring to VGs that are gone.
  - Drop dev_name_confirmed error message to debug level.
  - Fix setpriority error message to signed int.
  - Add assertions to trap deprecated P_ and V_ lock usage.
  - Avoid using DLM locks with LCK_CACHE type P_ lock requests.
  - Don't touch /dev in vgrename if activation is disabled.
  - Exclude VG_GLOBAL from internal concurrent VG lock counter.
  - Fix vgmerge snapshot_count when source VG contains snapshots.
  - Fix internal LV counter when a snapshot is removed.
  - Fix metadata corruption writing lvm1-formatted metadata with snapshots.
  - Fix lvconvert -m0 allocatable space check.
  - Don't attempt remote metadata backups of non-clustered VGs.
  - Improve preferred_names lvm.conf example.
  - Fix vgdisplay 'Cur LV' field to match lvdisplay output.
  - Fix lv_count report field to exclude hidden LVs.
  - Fix some pvmove error status codes.
  - Indicate whether or not VG is clustered in vgcreate log message.
  - Mention default --clustered setting in vgcreate man page.
  - Fix vgreduce to use vg_split_mdas to check sufficient mdas remain.
  - Update lvmcache VG lock state for all locking types now.
  - Fix output if overriding command_names on cmdline.
  - Add check to vg_commit() ensuring VG lock held before writing new VG metadata.
  - Add validation of LV name to pvmove -n.
  - Add some basic internal VG lock validation.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Fix vgsplit locking of new VG.
  - Avoid erroneous vgsplit error message for new VG.
  - Suppress duplicate message when lvresize fails because of invalid vgname.
  - Cache VG metadata internally while VG lock is held.
  - Fix redundant lvresize message if vg doesn't exist.
  - Make clvmd-cman use a hash rather than an array for node updown info.
  - Decode numbers in clvmd debugging output.
  - Fix uninitialised mutex in clvmd if all daemons are not running at startup.
  - Add config file overrides to clvmd when it reads the active LVs list.
  - Make clvmd refresh the context correctly when lvm.conf is updated.
  - Fix another allocation bug with clvmd and large node IDs.
  - Fix uninitialised variable in clvmd that could cause odd hangs.
  - Correct command name in lvmdiskscan man page.
  - clvmd no longer crashes if it sees nodeids over 50.
  - Fix potential deadlock in clvmd thread handling.
  - Update usage message for clvmd.
  - Fix clvmd man page not to print <br> and clarified debug options.
  - Escape double quotes and backslashes in external metadata and config data.
  - Correct a function name typo in _line_append error message.
  - Fix resetting of MIRROR_IMAGE and VISIBLE_LV after removal of LV.
  - Fix remove_layer_from_lv to empty the LV before removing it.
  - Add missing no-longer-used segs_using_this_lv test to check_lv_segments.
  - Fix lvconvert detection of mirror conversion in progress.
  - Avoid automatic lvconvert polldaemon invocation when -R specified.
  - Fix 'pvs -a' to detect VGs of PVs without metadata areas.
  - Divide up internal orphan volume group by format type.
  - Fix lvresize to support /dev/mapper prefix in the LV name.
  - Fix lvresize to pass new size to fsadm when extending device.
  - Fix unfilled parameter passed to fsadm from lvresize.
  - Update fsadm to call lvresize if the partition size differs (with option -l).
  - Fix fsadm to support VG/LV names.


author: Alasdair Kergon <agk@redhat.com> - 2.02.33-9
changelog:
  - Improve internal label caching performance while locks are held.
  - Fix mirror log name construction during lvconvert.


author: Alasdair Kergon <agk@redhat.com> - 2.02.32-8
changelog:
  - Fix pvs, vgs, lvs error exit status on some error paths.
  - Fix new parameter validation in vgsplit and test mode.
  - Fix internal metadata corruption in lvchange --resync.


author: Alasdair Kergon <agk@redhat.com> - 2.02.31-7
changelog:
  - Avoid readahead error message when using default setting of lvcreate -M1.
  - Fix lvcreate --nosync not to wait for non-happening sync.
  - Add very_verbose lvconvert messages.


author: Alasdair Kergon <agk@redhat.com> - 2.02.30-6
changelog:
  - Remove static libraries and binaries and move most binaries out of /usr.
  - Fix a segfault if using pvs with --all argument.
  - Fix vgreduce PV list processing not to process every PV in the VG.
  - Reinstate VG extent size and stripe size defaults (halved).
  - Set default readahead to twice maximium stripe size.
  - Detect non-orphans without MDAs correctly.
  - Prevent pvcreate from overwriting MDA-less PVs belonging to active VGs.
  - Don't use block_on_error with mirror targets version 1.12 and above.
  - Change vgsplit -l (for unimplemented --list) into --maxlogicalvolumes.
  - Update vgsplit to accept vgcreate options when new VG is destination.
  - Update vgsplit to accept existing VG as destination.
  - Major restructuring of pvmove and lvconvert code, adding stacking support.
  - Add new convert_lv field to lvs output.
  - Permit LV segment fields with PV segment reports.
  - Extend lvconvert to use polldaemon and wait for completion of initial sync.
  - Add seg_start_pe and seg_pe_ranges to reports.
  - Add fsadm interface to filesystem resizing tools.
  - Update --uuid argument description in man pages.
  - Print warning when lvm tools are running as non-root.


author: Alasdair Kergon <agk@redhat.com> - 2.02.29-1
changelog:
  - Make clvmd backup vg metadata on remote nodes.
  - Decode cluster locking state in log message.
  - Change file locking state messages from debug to very verbose.
  - Fix --addtag to drop @ prefix from name.
  - Stop clvmd going haywire if a pre_function fails.
  - Avoid nested vg_reads when processing PVs in VGs and fix associated locking.
  - Attempt to remove incomplete LVs with lvcreate zeroing/activation problems.
  - Add full read_ahead support.
  - Add lv_read_ahead and lv_kernel_read_ahead fields to reports and lvdisplay.
  - Prevent lvconvert -s from using same LV as origin and snapshot.
  - Fix human-readable output of odd numbers of sectors.
  - Add pv_mda_free and vg_mda_free fields to reports for raw text format.
  - Add LVM2 version to 'Generated by' comment in metadata.
  - Show 'not usable' space when PV is too large for device in pvdisplay.
  - Ignore and fix up any excessive device size found in metadata.
  - Fix error message when fixing up PV size in lvm2 metadata (2.02.11).
  - Fix orphan-related locking in pvdisplay and pvs.
  - Fix missing VG unlocks in some pvchange error paths.
  - Add some missing validation of VG names.
  - Detect md superblocks version 1.0, 1.1 and 1.2.
  - Add some pv-related error paths.
  - Handle future sysfs subsystem/block/devices directory structure.
  - Fix a bug in lvm_dump.sh checks for lvm/dmsetup binaries.
  - Fix underquotations in lvm_dump.sh.
  - Print --help output to stdout, not stderr.
  - After a cmdline processing error, don't print help text but suggest --help.
  - Add %PVS extents option to lvresize, lvextend, and lvcreate.
  - Remove no-longer-correct restrictions on PV arg count with stripes/mirrors.
  - Fix strdup memory leak in str_list_dup().
  - Link with -lpthread when static SELinux libraries require that.
  - Detect command line PE values that exceed their 32-bit range.
  - Include strerror string in dev_open_flags' stat failure message.
  - Avoid error when --corelog is provided without --mirrorlog. (2.02.28)
  - Correct --mirrorlog argument name in man pages (not --log).
  - Clear MIRROR_NOTSYNCED LV flag when converting from mirror to linear.
  - Modify lvremove to prompt for removal if LV active on other cluster nodes.
  - Add '-f' to vgremove to force removal of VG even if LVs exist.


author: Alasdair Kergon <agk@redhat.com> - 2.02.28-1
changelog:
  - vgscan and pvscan now trigger clvmd -R, which should now work.
  - Fix clvmd logging so you can get lvm-level debugging out of it.
  - Allow clvmd debug to be turned on in a running daemon using clvmd -d [-C].
  - Add more cluster info to lvmdump.
  - Fix lvdisplay man page to say LV size is reported in sectors, not KB.
  - Fix loading of persistent cache if cache_dir is used.
  - Only permit --force, --verbose and --debug arguments to be repeated.
  - Add support for renaming mirrored LVs.
  - Add --mirrorlog argument to specify log type for mirrors.
  - Don't leak a file descriptor if flock or fcntl fails.
  - Detect stream write failure reliably.
  - Reduce severity of lstat error messages to very_verbose.
  - Update to use autoconf 2.61, while still supporting 2.57.


author: Alasdair Kergon <agk@redhat.com> - 2.02.27-1
changelog:
  - Add -f to vgcfgrestore to list metadata backup files.
  - Add pvdisplay --maps implementation.
  - Add devices/preferred_names config regex list for displayed device names.
  - Add vg_mda_count and pv_mda_count columns to reports.
  - Change cling alloc policy attribute character from 'C' to l'.
  - Print warnings to stderr instead of stdout.
  - Fix snapshot cow area deactivation if origin is not active.
  - Reinitialise internal lvmdiskscan variables when called repeatedly.
  - Allow keyboard interrupt during user prompts when appropriate.
  - Fix deactivation code to follow dependencies and remove symlinks.
  - Fix a segfault in device_is_usable() if a device has no table.
  - Fix creation and conversion of mirrors with tags.
  - Add command stub for pvck.
  - Handle vgsplit of an entire VG as a vgrename.
  - Fix vgsplit for lvm1 format (set and validate VG name in PVs metadata).
  - Split metadata areas in vgsplit properly.
  - Fix and clarify vgsplit error messages.
  - Update lists of attribute characters in man pages.
  - Remove unsupported LVM1 options from vgcfgrestore man page.
  - Update vgcfgrestore man page to show mandatory VG name.
  - Update vgrename man page to include UUID and be consistent with lvrename.
  - Add some more debug messages to clvmd startup.
  - Fix thread race in clvmd.
  - Make clvmd cope with quorum devices.
  - Add extra internal error checking to clvmd.
  - Fix missing lvm_shell symbol in lvm2cmd library.
  - Move regex functions into libdevmapper.
  - Add kernel and device-mapper targets versions to lvmdump.
  - Add /sys/block listings to lvmdump.
  - Make lvmdump list /dev recursively.
  - Mark /etc/lvm subdirectories as directories in spec file.


author: Alasdair Kergon <agk@redhat.com> - 2.02.24-1
changelog:
  - Add BuildRequires readline-static until makefiles get fixed.
  - Fix processing of exit status in init scripts
  - Fix vgremove to require at least one vg argument.
  - Fix reading of striped LVs in LVM1 format.
  - Flag nolocking as clustered so clvmd startup sees clustered LVs.
  - Add a few missing pieces of vgname command line validation.
  - Support the /dev/mapper prefix on most command lines.


author: Alasdair Kergon <agk@redhat.com> - 2.02.23-1
changelog:
  - Fix vgrename active LV check to ignore differing vgids.
  - Fix two more segfaults if an empty config file section encountered.
  - Fix a leak in a reporting error path.
  - Add devices/cache_dir & devices/cache_file_prefix, deprecating devices/cache.


author: Alasdair Kergon <agk@redhat.com> - 2.02.22-1
changelog:
  - Add ncurses-static BuildRequires after package split.
  - Fix loading of segment_libraries.
  - If a PV reappears after it was removed from its VG, make it an orphan.
  - Don't update metadata automatically if VGIDs don't match.
  - Fix some vgreduce --removemissing command line validation.
  - Trivial man page corrections (-b and -P).
  - Add global/units to example.conf.
  - Remove readline support from lvm.static.


author: Alasdair Kergon <agk@redhat.com> - 2.02.21-1
changelog:
  - Fix vgsplit to handle mirrors.
  - Reorder fields in reporting field definitions.
  - Fix vgs to treat args as VGs even when PV fields are displayed.
  - Fix md signature check to handle both endiannesses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.20-1
changelog:
  - Fix exit statuses of reporting tools.
  - Add some missing close() and fclose() return code checks.
  - Add devices/ignore_suspended_devices to ignore suspended dm devices.
  - Fix refresh_toolcontext() always to wipe persistent device filter cache.
  - Long-lived processes write out persistent dev cache in refresh_toolcontext().
  - Streamline dm_report_field_* interface.
  - Update reporting man pages.
  - Add --clustered to man pages.
  - Add field definitions to report help text.


author: Alasdair Kergon <agk@redhat.com> - 2.02.19-1
changelog:
  - Fix a segfault if an empty config file section encountered.
  - Fix partition table processing after sparc changes.
  - Fix cmdline PE range processing segfault.
  - Move basic reporting functions into libdevmapper.


author: Alasdair Kergon <agk@redhat.com> - 2.02.18-1
changelog:
  - Use CFLAGS when linking so mixed sparc builds can supply -m64.
  - Prevent permission changes on active mirrors.
  - Print warning instead of error message if lvconvert cannot zero volume.
  - Add snapshot options to lvconvert man page.
  - dumpconfig accepts a list of configuration variables to display.
  - Change dumpconfig to use --file to redirect output to a file.
  - Avoid vgreduce error when mirror code removes the log LV.
  - Fix ambiguous vgsplit error message for split LV.
  - Fix lvextend man page typo.
  - Use no flush suspending for mirrors.
  - Fix create mirror with name longer than 22 chars.


author: Alasdair Kergon <agk@redhat.com> - 2.02.17-1
changelog:
  - Add missing pvremove error message when device doesn't exist.
  - When lvconvert allocates a mirror log, respect parallel area constraints.
  - Check for failure to allocate just the mirror log.
  - Support mirror log allocation when there is only one PV: area_count now 0.
  - Fix detection of smallest area in _alloc_parallel_area() for cling policy.
  - Add manpage entry for clvmd -T
  - Fix hang in clvmd if a pre-command failed.


author: Alasdair Kergon <agk@redhat.com> - 2.02.16-1
changelog:
  - Fix VG clustered read locks to use PR not CR.
  - Adjust some alignments for ia64/sparc.
  - Fix mirror segment removal to use temporary error segment.
  - Always compile debug logging into clvmd.
  - Add startup timeout to clvmd startup script.
  - Add -T (startup timeout) switch to clvmd.
  - Improve lvm_dump.sh robustness.


author: Alasdair Kergon <agk@redhat.com> - 2.02.12-2
changelog:
  - Remove no-longer-used ldconfig from lvm2-cluster and fix lvmconf
    to cope without the shared library.


author: Alasdair Kergon <agk@redhat.com> - 2.02.11-1.0
changelog:
  - New upstream with numerous fixes and small enhancements.
    (See the WHATS_NEW documentation file for complete upstream changelog.)


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-2.0
changelog:
  - No longer abort read operations if archive/backup directories aren't there.
  - Add runtime directories and file to the package.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-1.0
changelog:
  - Improve detection of external changes affecting internal cache.
  - Add clustered VG attribute.
  - Suppress rmdir opendir error message.


author: Alasdair Kergon <agk@redhat.com> - 2.01.07-1.0
changelog:
  - Remove build directory from built-in path.
  - Extra /dev scanning required for clustered operation.


author: Alasdair Kergon <agk@redhat.com> - 2.00.24-1
changelog:
  - More upstream fixes.  (Always check WHATS_NEW file for details.)
  - Add requested BuildRequires. [bz 124916, 132408]


author: Jeremy Katz <katzj@redhat.com> - 2.00.20-2
changelog:
  - add patch for iSeries viodasd support
  - add patch to check file type using stat(2) if d_type == DT_UNKNOWN (#129674)


author: Alasdair Kergon <agk@redhat.com> 2.00.12-1
changelog:
  - Install default /etc/lvm/lvm.conf.
  - Move non-static binaries to /usr/sbin.
  - Add temporary links in /sbin to lvm.static until rc.sysinit gets updated.


author: Alasdair Kergon <agk@redhat.com> 2.00.10-1
changelog:
  - Update to version 2.00.10, which incorporates the RH-specific patches
    and includes various fixes and enhancements detailed in WHATS_NEW.


author: Jeremy Katz <katzj@redhat.com> 2.00.08-5
changelog:
  - Fix sysfs patch to find sysfs
  - Take patch from dwalsh and tweak a little for setting SELinux contexts on
    device node creation and also do it on the symlink creation.  
    Part of this should probably be pushed down to device-mapper instead


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.9-1
changelog:
  - sieve updated to 0.1.14
  - managesieve updated to 0.11.10 
  - updated to 1.2.9
  - maildir: When saving, filenames now always contain ,S=<size>.
    Previously this was done only when quota plugin was loaded. It's
    required for zlib plugin and may be useful for other things too.
  - maildir: v1.2.7 and v1.2.8 caused assert-crashes in
    maildir_uidlist_records_drop_expunges()
  - maildir_copy_preserve_filename=yes could have caused crashes.
  - Maildir++ quota: % limits weren't updated when limits were read
    from maildirsize.
  - virtual: v1.2.8 didn't fully fix the "lots of mailboxes" bug
  - virtual: Fixed updating virtual mailbox based on flag changes.
  - fts-squat: Fixed searching multi-byte characters.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.7-1
changelog:
  - updated to dovecot 1.2.7
  - add man pages
  - IMAP: IDLE now sends "Still here" notifications to same user's
    connections at the same time. This hopefully reduces power usage
    of some mobile clients that use multiple IDLEing connections.
  - IMAP: If imap_capability is set, show it in the login banner.
  - IMAP: Implemented SORT=DISPLAY extension.
  - Login process creation could have sometimes failed with epoll_ctl()
    errors or without epoll probably some other strange things could
    have happened.
  - Maildir: Fixed some performance issues
  - Maildir: Fixed crash when using a lot of keywords.
  - Several fixes to QRESYNC extension and modseq handling
  - mbox: Make sure failed saves get rolled back with NFS.
  - dbox: Several fixes.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.6-3
changelog:
  - sieve updated to 0.1.13 which brings these changes:
  - Body extension: implemented proper handling of the :raw transform
    and added various new tests to the test suite. However, :content
    "multipart" and :content "message/rfc822" are still not working.
  - Fixed race condition occuring when multiple instances are saving the
    same binary (patch by Timo Sirainen).
  - Body extension: don't give SKIP_BODY_BLOCK flag to message parser,
    we want the body!
  - Fixed bugs in multiscript support; subsequent keep actions were not
    always merged correctly and implicit side effects were not always
    handled correctly.
  - Fixed a segfault bug in the sieve-test tool occuring when compile
    fails.
  - Fixed segfault bug in action procesing. It was triggered while
    merging side effects in duplicate actions.
  - Fixed bug in the Sieve plugin that caused it to try to stat() a NULL
    path, yielding a 'Bad address' error.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.6-1
changelog:
  - dovecot updated to 1.2.6
  - Added authtest utility for doing passdb and userdb lookups.
  - login: ssl_security string now also shows the used compression.
  - quota: Don't crash with non-Maildir++ quota backend.
  - imap proxy: Fixed crashing with some specific password characters.
  - fixed broken dovecot --exec-mail.
  - Avoid assert-crashing when two processes try to create index at the
    same time.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.5-1
changelog:
  - updated to dovecot 1.2.5
  - Authentication: DIGEST-MD5 and RPA mechanisms no longer require
    user's login realm to be listed in auth_realms. It only made
    configuration more difficult without really providing extra security.
  - zlib plugin: Don't allow clients to save compressed data directly.
    This prevents users from exploiting (most of the) potential security
    holes in zlib/bzlib.
  - fix index file handling that could have caused an assert-crash
  - IMAP: Fixes to QRESYNC extension.
  - deliver: Don't send rejects to any messages that have Auto-Submitted
    header. This avoids emails loops.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.4-1
changelog:
  - updated: dovecot 1.2.4, managesieve 0.11.9, sieve 0.1.12
  - fixed a crash in index file handling
  - fixed a crash in saving messages where message contained a CR
    character that wasn't followed by LF
  - fixed a crash when listing shared namespace prefix
  - sieve: implemented the new date extension. This allows matching
    against date values in header fields and the current date at
    the time of script evaluation
  - managesieve: reintroduced ability to abort SASL with "*" response


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.3-1
changelog:
  - updated: dovecot 1.2.3, managesieve 0.11.8, sieve 0.1.11
  - Mailbox names with control characters can't be created anymore.
    Existing mailboxes can still be accessed though.
  - Allow namespace prefix to be opened as mailbox, if a mailbox
    already exists in the root dir.
  - Maildir: dovecot-uidlist was being recreated every time a mailbox
    was accessed, even if nothing changed.
  - listescape plugin was somewhat broken
  - ldap: Fixed hang when >128 requests were sent at once.
  - fts_squat: Fixed crashing when searching virtual mailbox.
  - imap: Fixed THREAD .. INTHREAD crashing.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.2-1.20090728snap
changelog:
  - updated to post 1.2.2 snapshot (including post release GSSAPI fix)
  - Fixed "corrupted index cache file" errors
  - IMAP: FETCH X-* parameters weren't working.
  - Maildir++ quota: Quota was sometimes updated wrong
  - Dovecot master process could hang if it received signals too rapidly


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.2.1-1
changelog:
  - updated to 1.2.1
  - GSSAPI authentication is fixed (#506782)
  - logins now fail if home directory path is relative, because it was 
    not working correctly and never was expected to work
  - sieve and managesieve update


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.1.11-1
changelog:
  - updated to 1.1.11
  - IMAP: PERMANENTFLAGS list didn't contain \*, causing some clients
    not to save keywords.
  - auth: Using "username" or "domain" passdb fields caused problems
    with cache and blocking passdbs in v1.1.8 .. v1.1.10.   
  - userdb prefetch + blocking passdbs was broken with non-plaintext
    auth in v1.1.8 .. v1.1.10.


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.1.7-2
changelog:
  - revert changes from 1:1.1.6-2 and 1:1.1.6-1
  - password can be stored in different file readable only for root 
    via !include_try directive


author: Michal Hlavinka <mhlavink@redhat.com> - 1:1.1.6-1
changelog:
  - update to upstream version 1.1.6
  - change permissions of deliver and dovecot.conf to prevent possible password exposure


author: Dan Horak <dan[at]danny.cz> - 1:1.1.2-1
changelog:
  - update to upstream version 1.1.2
  - final solution for #445200 (add /etc/sysconfig/dovecot for start-up options)


author: Dan Horak <dan[at]danny.cz> - 1:1.1.0-1
changelog:
  - update to upstream version 1.1.0
  - update sieve plugin to 1.1.5
  - remove unnecessary patches
  - enable ldap and gssapi plugins
  - change ownership of dovecot.conf (Resolves: #452088)


author: Dan Horak <dan[at]danny.cz> - 1:1.0.14-1
changelog:
  - update to upstream version 1.0.14
  - remove setcred patch (use of setcred must be explictly enabled in config)


author: Dan Horak <dan[at]danny.cz> - 1:1.0.13-8
changelog:
  - update scriptlets to follow UsersAndGroups guideline
  - remove support for upgrading from version < 1.0 from scriptlets
  - Resolves: #448095


author: Tomas Janousek <tjanouse@redhat.com> - 1.0.0-11.7
changelog:
  - specfile merge from 145241 branch
      - new sql split patch
      - support for not building all sql modules
      - split sql libraries to separate packages


author: Tomas Janousek <tjanouse@redhat.com> - 1.0-1.rc15
changelog:
  - update to latest upstream, fixes a few bugs, plus a security
    vulnerability (#216508, CVE-2006-5973)


author: Petr Rockai <prockai@redhat.com> - 1.0-0.rc7
changelog:
  - update to latest upstream release candidate, should fix occasional
    hangs and mbox issues... INBOX. namespace is still broken though
  - do not run over symlinked certificates in new locations on upgrade


author: Petr Rockai <prockai@redhat.com> - 1.0-0.rc2
changelog:
  - update to latest upstream release candidate
  - disable inotify for now, doesn't build -- this needs fixing though


author: Petr Rockai <prockai@redhat.com> - 1.0-0.beta8.2
changelog:
  - put back pop3_uidl_format default that got lost
    in the beta2->beta7 upgrade (would cause pop3 to not work
    at all in many situations)


author: Petr Rockai <prockai@redhat.com> - 1.0-0.beta2.5
changelog:
  - fix #182240 by looking in lib64 for libs first and then lib
  - fix comment #1 in #182240 by copying over the example config files
    to documentation directory


author: Petr Rockai <prockai@redhat.com> - 1.0-0.beta2.3
changelog:
  - change the compiled-in defaults and adjust the default's configfile
    commented-out example settings to match compiled-in defaults,
    instead of changing the defaults only in the configfile, as per #179432
  - fix #179574 by providing a default uidl_format for pop3
  - half-fix #179620 by having plaintext auth enabled by default... this
    needs more thinking (which one we really want) and documentation
    either way


author: Petr Rockai <prockai@redhat.com> - 1.0-0.beta2
changelog:
  - new upstream version, hopefully fixes #173928, #163550
  - fix #168866, use install -p to install documentation


author: John Dennis <jdennis@redhat.com> - 0.99.14-1.fc4
changelog:
  - fix bug #147874, update to 0.99.14 release
    v0.99.14 2005-02-11  Timo Sirainen <tss at iki.fi>
    - Message address fields are now parsed differently, fixing some
      issues with spaces. Affects only clients which use FETCH ENVELOPE
      command.
    - Message MIME parser was somewhat broken with missing MIME boundaries
    - mbox: Don't allow X-UID headers in mails to override the UIDs we
      would otherwise set. Too large values can break some clients and
      cause other trouble.
    - passwd-file userdb wasn't working
    - PAM crashed with 64bit systems
    - non-SSL inetd startup wasn't working
    - If UID FETCH notices and skips an expunged message, don't return
      a NO reply. It's not needed and only makes clients give error
      messages.


author: John Dennis <jdennis@redhat.com> 0.99.13-3.devel
changelog:
  - fix bug #145214, force mbox_locks to fcntl only
  - fix bug #145241, remove prereq on postgres and mysql, allow rpm auto
    dependency generator to pick up client lib dependency if needed.


author: John Dennis <jdennis@redhat.com> 0.99.13-2.devel
changelog:
  - make postgres & mysql conditional build
  - remove execute bit on migration example scripts so rpm does not pull
    in additional dependences on perl and perl modules that are not present
    in dovecot proper.
  - add REDHAT-FAQ.txt to doc directory


author: John Dennis <jdennis@redhat.com> 0.99.13-1.devel
changelog:
  - bring up to date with latest upstream, 0.99.13, bug #143707
    also fix bug #14462, bad dovecot-uid macro name


author: John Dennis <jdennis@redhat.com> 0.99.11-8.devel
changelog:
  - fix bug #129539, dovecot starts too early,
    set chkconfig to 65 35 to match cyrus-imapd
  - also delete some old commented out code from SSL certificate creation


author: John Dennis <jdennis@redhat.com> 0.99.11-7.devel
changelog:
  - add UW to Dovecot migration documentation and scripts, bug #139954
    fix SSL documentation and scripts, add missing documentation, bug #139276


author: John Dennis <jdennis@redhat.com> 0.99.11-1.FC3.1
changelog:
  - bring up to latest upstream,
    comments from Timo Sirainen <tss at iki.fi> on release v0.99.11 2004-09-04  
    + 127.* and ::1 IP addresses are treated as secured with
      disable_plaintext_auth = yes
    + auth_debug setting for extra authentication debugging
    + Some documentation and error message updates
    + Create PID file in /var/run/dovecot/master.pid
    + home setting is now optional in static userdb
    + Added mail setting to static userdb
    - After APPENDing to selected mailbox Dovecot didn't always notice the
      new mail immediately which broke some clients
    - THREAD and SORT commands crashed with some mails
    - If APPENDed mail ended with CR character, Dovecot aborted the saving
    - Output streams sometimes sent data duplicated and lost part of it.
      This could have caused various strange problems, but looks like in
      practise it rarely caused real problems.


author: John Dennis <jdennis@redhat.com> 0.99.10.9-1,FC3,1
changelog:
  - bring up to date with latest upstream, fixes include:
  - LDAP support compiles now with Solaris LDAP library
  - IMAP BODY and BODYSTRUCTURE replies were wrong for MIME parts which
    didn't contain Content-Type header.
  - MySQL and PostgreSQL auth didn't reconnect if connection was lost
    to SQL server
  - Linking fixes for dovecot-auth with some systems
  - Last fix for disconnecting client when downloading mail longer than
    30 seconds actually made it never disconnect client. Now it works
    properly: disconnect when client hasn't read _any_ data for 30
    seconds.
  - MySQL compiling got broken in last release
  - More PostgreSQL reconnection fixing


author: John Dennis <jdennis@redhat.com> 0.99.10.7-1,FC3,1
changelog:
  - enable postgres and mySQL in build
  - fix configure to look for mysql in alternate locations
  - nuke configure script in tar file, recreate from configure.in using autoconf

  - bring up to latest upstream, which included:
  - Added outlook-pop3-no-nuls workaround to fix Outlook hang in mails with NULs.
  - Config file lines can now contain quoted strings ("value ")
  - If client didn't finish downloading a single mail in 30 seconds,
    Dovecot closed the connection. This was supposed to work so that
    if client hasn't read data at all in 30 seconds, it's disconnected.
  - Maildir: LIST now doesn't skip symlinks


author: John Dennis <jdennis@redhat.com> - 0.99.10.6-1
changelog:
  - bring up to date with upstream,
    recent change log comments from Timo Sirainen were:
    SHA1 password support using OpenSSL crypto library
    mail_extra_groups setting
    maildir_stat_dirs setting
    Added NAMESPACE capability and command
    Autocreate missing maildirs (instead of crashing)
    Fixed occational crash in maildir synchronization
    Fixed occational assertion crash in ioloop.c
    Fixed FreeBSD compiling issue
    Fixed issues with 64bit Solaris binary


author: Warren Togami <wtogami@redhat.com> 0.99.10.4-4
changelog:
  - default auth config that is actually usable
  - Timo Sirainen (author) suggested functionality fixes
    maildir, imap-fetch-body-section, customflags-fix


author: Jeremy Katz <katzj@redhat.com> 0.99.10-7
changelog:
  - another patch from upstream to fix returning invalid data on partial 
    BODY[part] fetches
  - patch to avoid confusion of draft/deleted in indexes


author: Jeremy Katz <katzj@redhat.com> 0.99.10-0.2
changelog:
  - 0.99.10-rc2 (includes ssl detection fix)
  - a few tweaks from fedora
    - noreplace the config file
    - configure --with-ldap to get LDAP enabled


author: Jeremy Katz <katzj@redhat.com> 0.99.10-0.1
changelog:
  - 0.99.10-rc1
  - add fix for ssl detection
  - add zlib-devel to BuildRequires
  - change pam service name to dovecot
  - include pam config


author: Jeremy Katz <katzj@redhat.com> 0.99.9.1-1
changelog:
  - update to 0.99.9.1
  - add patch from upstream to fix potential bug when fetching with 
    CR+LF linefeeds
  - tweak some things in the initscript and config file noticed by the 
    fedora folks


author: Jeremy Katz <katzj@redhat.com> 0.99.8-1
changelog:
  - 0.99.8
  - add some buildrequires
  - fixup to build with openssl 0.9.7
  - now includes a pop3 daemon (off by default)
  - clean up description and %preun
  - add dovecot user (uid/gid of 97)
  - add some buildrequires
  - move the ssl cert to %{_datadir}/ssl/certs
  - create a dummy ssl cert in %post
  - own /var/run/dovecot
  - make the config file a source so we get default mbox locks of fcntl


author: Jiri Popelka <jpopelka@redhat.com> - 12:4.1.0p1-15
changelog:
  - Memory leak in the load_balance_mine() function is fixed (#554384)
  - Use macro global instead of define


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0p1-4
changelog:
  - Upgrade to latest ldap-for-dhcp patch which makes sure that only
    dhcpd links with OpenLDAP (#517474)


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0p1-3
changelog:
  - Update NetworkManager dispatcher script to remove case conversion
    and source /etc/sysconfig/network


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0p1-2
changelog:
  - Add /usr/lib[64]/pm-utils/sleep.d/56dhclient to handle suspend and
    resume with active dhclient leases (#479639)


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-22
changelog:
  - Set permissions on /etc/dhcp to 0750 (#508247)
  - Update to new ldap-for-dhcp patch set
  - Correct problems when upgrading from a previous release and your
    dhcpd.conf file not being placed in /etc/dhcp (#506600)


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-21
changelog:
  - Handle cases in add_timeout() where the function is called with a NULL
    value for the 'when' parameter (#506626)
  - Fix SELinux denials in dhclient-script when the script makes backup
    configuration files and restores them later (#483747)


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-19
changelog:
  - Restrict interface names given on the dhcpd command line to length
    IFNAMSIZ or shorter (#441524)
  - Change to /etc/sysconfig/network-scripts in dhclient-script before
    calling need_config or source_config (#496233)


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-17
changelog:
  - Fix setting default route when client IP address changes (#486512, #473658)
  - 'reload' and 'try-restart' on dhcpd and dhcrelay init scripts
    will display usage information and return code 3


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-16
changelog:
  - Correct %post problems in dhclient package (#495361)
  - Read hooks scripts from /etc/dhcp (#495361)
  - Update to latest ldap-for-dhcp


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-6
changelog:
  - Enable dhcpv6 support (#480798)
  - Fix config file migration in scriptlets (#480543)
  - Allow dhclient-script expansion with /etc/dhcp/dhclient.d/*.sh scripts


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-2
changelog:
  - Make sure all /etc/dhcp config files are marked in the manifest
  - Include new config file directies in the dhcp and dhclient packages
  - Do not overwrite new config files if they already exist


author: David Cantrell <dcantrell@redhat.com> - 12:4.1.0-1
changelog:
  - Upgraded to ISC dhcp-4.1.0
  - Had to rename the -T option to -timeout as ISC is now using -T
  - Allow package rebuilders to easily enable DHCPv6 support with:
        rpmbuild --with DHCPv6 dhcp.spec
    Note that Fedora is still using the 'dhcpv6' package, but some
    users may want to experiment with the ISC DHCPv6 implementation
    locally.


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-32
changelog:
  - Enable LDAP/SSL support in dhcpd (#467740)
  - Do not calculate a prefix for an address we did not receive (#473885)
  - Removed libdhcp4client because libdhcp has been removed from Fedora


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-31
changelog:
  - Use O_CLOEXEC in open(2) calls and "e" mode in fopen(3) calls, build
    with -D_GNU_SOURCE so we pick up O_CLOEXEC (#468984)
  - Add missing prototype for validate_port() in common/inet.c


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-30
changelog:
  - Fix dhclient.conf man page and sample config file to say 'supersede
    domain-search', which is what was actually demonstrated (#467955)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-26
changelog:
  - Validate port numbers for dhclient, dhcpd, and dhcrelay to ensure
    that are within the correct range (#438149)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-23
changelog:
  - Prevent $metric from being set to '' (#460640)
  - Remove unnecessary warning messages
  - Do not source config file (ifcfg-DEVICE) unless it exists


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-22
changelog:
  - Add missing '[' to dhclient-script (#459860)
  - Correct test statement in add_default_gateway() in dhclient-script (#459860)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-20
changelog:
  - Rewrite of /sbin/dhclient-script (make the script a little more readable,
    discontinue use of ifconfig in favor of ip, store backup copies of orig
    files in /var rather than in /etc)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-19
changelog:
  - Remove 'c' from the domain-search format string in common/tables.c
  - Prevent \032 from appearing in resolv.conf search line (#450042)
  - Restore SELinux context on saved /etc files (#451560)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-17
changelog:
  - Carry over RES_OPTIONS from ifcfg-ethX files to /etc/resolv.conf (#202923)
  - Clean up Requires tags for devel packages
  - Allow SEARCH variable in ifcfg files to override search path (#454152)
  - Do not down interface if there is an active lease (#453982)
  - Clean up how dhclient-script restarts ypbind
  - Set close-on-exec on dhclient.leases for SELinux (#446632)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-16
changelog:
  - Remove instaces of \032 in domain search option (#450042)
  - Make 'service dhcpd configtest' display text indicating the status


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-12
changelog:
  - Remove Requires on openldap-server (#432180)
  - Replace CLIENTBINDIR, ETCDIR, DBDIR, and RUNDIR in the man pages with the
    correct paths


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-10
changelog:
  - Save conf files adding '.predhclient.$interface' to the name (#306381)
  - Only restore conf files on EXPIRE/FAIL/RELEASE/STOP if there are no other
    dhclient processes running (#306381)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-9
changelog:
  - Match LDAP server option values in stables.c and dhcpd.h (#431003)
  - Fix invalid sprintf() statement in server/ldap.c (#431003)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-6
changelog:
  - read_function() comes from the LDAP patch, so fix it there
  - Init new struct universe structs in libdhcp4client so we don't crash on
    multiple DHCP attempts (#428203)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-4
changelog:
  - Fix dhclient.lease file parsing problems (#428785)
  - Disable IPv6 support for now as we already ship dhcpv6 (#428987)


author: David Cantrell <dcantrell@redhat.com> - 12:4.0.0-1
changelog:
  - Upgrade to ISC dhcp-4.0.0 (#426634)
       - first ISC release to incorporate DHCPv6 protocol support
       - source tree now uses GNU autoconf/automake
  - Removed the libdhcp4client-static package


author: David Cantrell <dcantrell@redhat.com> - 12:3.1.0-8
changelog:
  - Put dhcp.schema in /etc/openldap/schema (#330471)
  - Remove manpages patch and keep modified man pages as Source files
  - Improve dhclient.8 man page to list options in a style consistent
    with most other man pages on the planet
  - Upgrade to latest dhcp LDAP patch, which brings in a new dhcpd-conf-to-ldap
    script, updated schema file, and other bug fixes including SSL support for
    LDAP authentication (#375711)
  - Do not run dhcpd and dhcrelay services by default (#362321)


author: David Cantrell <dcantrell@redhat.com> - 12:3.1.0-6
changelog:
  - Rename Makefile.dist to Makefile.libdhcp4client
  - Spec file cleanups
  - Include stdarg.h in libdhcp_control.h


author: David Cantrell <dcantrell@redhat.com> - 12:3.1.0-5
changelog:
  - Remove chkconfig usage for ypbind in dhclient-script (#351211)
  - Combine dhcp-static and dhcp-devel packages since there are no shared
    libraries offered
  - Remove Requires: openldap-devel on dhcp-devel and libdhcp4client-devel
  - Make libdhcp4client-devel require dhcp-devel (for libdhcp_control.h)
  - Do not make dhcp-devel require the dhcp package, those are independent


author: David Cantrell <dcantrell@redhat.com> - 12:3.1.0-4
changelog:
  - Install libdhcp_control.h to /usr/include/isc-dhcp/libdhcp_control.h
  - Update libdhcp4client patch to use new libdhcp_control.h location
  - Remove __fedora_contrib/ subdirectory in /usr/share/doc/dhcp-3.1.0,
    install those docs to /usr/share/doc/dhcp-3.1.0


author: David Cantrell <dcantrell@redhat.com> - 12:3.1.0-1
changelog:
  - Upgrade to ISC dhcp-3.1.0
  - Remove unnecessary /usr/include/dhcp4client/isc_dhcp headers
  - Make sure restorecon is run on /var/lib/dhcpd/dhcpd.leases (#251688)
  - Install dhcp.schema to /etc/openldap/dhcp.schema (#330471)


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.6-8
changelog:
  - Init script fixes (#320761)
  - Removed linux.dbus-example script since we aren't using dhcdbd now
  - Remove dhcdbd leftovers from dhclient-script (#306381)


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.6-7
changelog:
  - In dhcp.conf.5, explain that if no next-server statement applies to the
    requesting client, the address 0.0.0.0 is used (#184484).


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.6-3
changelog:
  - Remove the -x switch enabling extended new option info.  If given to
    dhclient now, it's ignored.


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-36
changelog:
  - BOOTP_BROADCAST_ALWAYS is not the same as ATSFP, fixed
  - Added anycast mac support to dhclient for OLPC


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-35
changelog:
  - Disable -fvisibility=hidden for now as it breaks dhcpv4_client() from
    the shared library (#240804)


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-34
changelog:
  - Init script fixes (#237985, #237983)
  - Reference correct scripts in dhclient-script.8 man page (#238036)


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-31
changelog:
  - Spec file cleanups (#225691)
  - Put libdhcpctl.a and libomapi.a in dhcp-devel-static package
  - Put libdhcp4client.a in libdhcp4client-devel-static package


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-27
changelog:
  - Ensure that Perl and Perl modules are not added as dependencies (#234688)
  - Reorganize patches by feature/bug per packaging guidelines (#225691)
  - Move the following files from patches to source files:
       linux.dbus-example, linux, Makefile.dist, dhcp4client.h, libdhcp_control.h
  - Compile with -fno-strict-aliasing as ISC coding standards generally don't
    agree well with gcc 4.x.x


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-24
changelog:
  - Include contrib/ subdirectory in /usr/share/doc (#230476)
  - Added back Requires for perl since dhcpd-conf-to-ldap needs it (#225691)
  - Put copies of dhcp-options and dhcp-eval man pages in the dhcp and
    dhclient packages rather than having the elaborate symlink collection
  - Explicitly name man pages in the %files listings
  - Use the %{_sysconfdir} and %{_initrddir} macros (#225691)
  - Use macros for commands in %build and %install
  - Split README.ldap, draft-ietf-dhc-ldap-schema-01.txt, and
    dhcpd-conf-to-ldap.pl out of the LDAP patch
  - Split linux.dbus-example script out of the extended new option info patch
  - Remove unnecessary changes from the Makefile patch


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-23
changelog:
  - Update Xen partial checksums patch
  - Remove perl Requires (#225691)
  - Make dhcp-devel depend on dhcp = e:v-r (#225691)
  - libdhcp4client-devel Requires pkgconfig (#225691)
  - Do not add to RPM_OPT_FLAGS, use COPTS variable instead (#225691)
  - Use %{buildroot} macro instead of RPM_BUILD_ROOT variable (#225691)
  - Preserve timestamps on all installed data files (#225691)
  - Remove dhcp-options.5.gz and dhcp-eval.5.gz symlinking in post (#225691)
  - Use %defattr(-,root,root,-) (#225691)
  - Do not flag init scripts as %config in %files section (#225691)


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-13
changelog:
  - Add support for dhcpd(8) to read dhcpd.conf from an LDAP server (#224352)
  - Remove invalid ja_JP.eucJP man pages from /usr/share/doc


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-9
changelog:
  - Remove dhcptables.pl from the source package
  - Mark libres.a symbols hidden (#198496)
  - Set DT_SONAME on libdhcp4client to libdhcp4client-VERSION.so.0
  - Make function definition for dst_hmac_md5_init() match the prototype


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-8
changelog:
  - Roll md5 patch in to libdhcp4client patch since it's related
  - Do not overwrite /etc/ntp/step-tickers (#217663)
  - Resolves: rhbz#217663


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-4
changelog:
  - Enable relinquish_timeouts() and cancel_all_timeouts() even when
    DEBUG_MEMORY_LEAKAGE_ON_EXIT is not defined
  - Add prototypes for b64_pton() and b64_ntop in dst/
  - Move variable declarations and labels around in the fix-warnings patch
  - Expand the list of objects needed for libdhcp4client (#215328)
  - Use libres.a in libdhcp4client since it gives correct minires objects
  - Remove the dhcp options table in C, Perl, Python, and text format (these
    were reference files added to /usr/share/doc)


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-3
changelog:
  - Remove struct universe *universe from envadd_state in the client patch
  - Add struct universe *universe to envadd_state in the enoi patch
  - Add example dbusified dhclient-script in the enoi patch


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.5-2
changelog:
  - Change the way libdhcp4client is compiled (patch main source, create new
    Makefile rather than copy and patch code after main patches)
  - Fix up problems generating compiler warnings
  - Use 'gcc' for making dependencies
  - Pass -fPIC instead of -fpie/-fPIE in compiler flags
  - Combine the extended new option info changes in to one patch file (makes
    it easier for outside projects that want to use dhcdbd and NetworkManager)


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.4-24
changelog:
  - Put typedef for dhcp_state_e before it's used in libdhcp_control.h (#212612)
  - Remove dhcpctl.3 from minires/Makefile.dist because it's in dhcpctl
  - Remove findptrsize.c and just set compiler flag for ppc64 and s390x


author: David Cantrell <dcantrell@redhat.com> - 12:3.0.4-23
changelog:
  - Remove NODEBUGINFO junk from the spec file as well as old/unused code
  - Rolled all 68 patches in to one patch since more than half of them get
    overridden by later patches anyway.


author: Peter Jones <pjones@redhat.com> - 12:3.0.4-15
changelog:
  - Make timeout dispatch code not recurse while traversing a linked
    list, so it doesn't try to free an entries that have been removed.
    (bz #195723)
  - Don't patch in a makefile, do it in the spec.


author: Jason Vas Dias <jvdias@redhat.com> - 12:3.0.4-14
changelog:
  - fix bug 191461: preserve ntp.conf local clock fudge statements
  - fix bug 193047: both dhcp and dhclient need to ship common
                    man-pages: dhcp-options(5) dhcp-eval(5)


author: Jason Vas Dias <jvdias@redhat.com> - 12:3.0.4-10
changelog:
  - fix bug 193047: allow $METRIC to be specified for dhclient routes
  - add a '-R <request option list>' dhclient argument


author: Jason Vas Dias <jvdias@redhat.com> - 12:3.0.4-8.1
changelog:
  - fix a libdhcp4client memory leak (1 strdup) and 
    fill in client->packet.siaddr before bind_lease() for pump
    nextServer option.


author: Jason Vas Dias <jvdias@redhat.com> - 12:3.0.4-2
changelog:
  - Fix bug 191470: prevent dhcpd writing 8 byte dhcp-lease-time 
                    option in packets on 64-bit platforms


author: Jason Vas Dias <jvdias@redhat.com> - 12:3.0.4-2
changelog:
  - Add the libdhcp4client library package for use by the new libdhcp 
    package, which enables dhclient to be invoked by programs in a 
    single process from the library. The normal dhclient code is
    unmodified by this.


author: Jason Vas Dias <jvdias@redhat.com> - 12:3.0.4-1
changelog:
  - Upgrade to upstream version 3.0.4, released Friday 2006-05-05 .
  - Add new dhclient command line arguments:
    -H <host-name> : parse as dhclient.conf 'send host-name "<host-name>";'
    -F <fqdn>      : parse as dhclient.conf 'send fqdn.fqdn "<fqdn>";'
    -T <timeout>   : parse as dhclient.conf 'timeout <timeout>;'


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-26
changelog:
  - fix bug 181908: enable dhclient to operate on IBM zSeries z/OS linux guests:
    o add -I <dhcp-client-identifier> dhclient command line option
    o add -B "always broadcast" dhclient command line option
    o add 'bootp-broadcast-always;' dhclient.conf statement


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-22
changelog:
  - fix bug 181482: resolv.conf not updated on RENEW :
    since dhcp-3.0.1rc12-RHScript.patch: "$new_domain_servers" should have
    been "$new_domain_name_servers" :-(


author: Dan Williams <dcbw@redhat.com> - 11:3.0.3-21
changelog:
  - Fix dhclient-script to use /bin/dbus-send now that all dbus related
    binaries are in /bin rather than /usr/bin


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-20
changelog:
  - fix bug 177845: allow client ip-address as default router 
  - fix bug 176615: fix DDNS update when Windows-NT client sends 
                    host-name with trailing nul


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-12
changelog:
  - fix bug 173619: dhclient-script should reconfig on RENEW if 
                    subnet-mask, broadcast-address, mtu, routers, etc.
                    have changed
  - apply upstream improvements to trailing nul options fix of bug 160655


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-11
changelog:
  - Rebuild for FC-5
  - fix bug 167028 - test IBM's unicast bootp patch (from xma@us.ibm.com)
  - fix bug 171312 - silence chkconfig error message if ypbind not installed
  - fix dhcpd.init when -cf arg given to dhcpd
  - make dhcpd init touch /var/lib/dhcpd/dhcpd.leases, not /var/lib/dhcp/dhcpd.leases


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-10
changelog:
  - Allow dhclient route metrics to be specified with DHCP options:
    The dhcp-options(5) man-page states:
    'option routers ... Routers should be listed in order of preference' 
    and
    'option static-routes ... are listed in descending order of priority' .
    No preference / priority could be set with previous dhclient-script .
    Now, dhclient-script provides: 
    Default Gateway (option 'routers') metrics:
      Instead of allowing only one default gateway, if more than one router 
      is specified in the routers option, routers following the first router
      will have a 'metric' of their position in the list (1,...N>1).
    Option static-routes metrics:
      If a target appears in the list more than once, routes for duplicate
      targets will have successively greater metrics, starting at 1.


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-8
changelog:
  - further fix for bug 160655 / ISC bug 15293 - upstream patch:
    do NOT always strip trailing nulls in the dhcpd server
  - handle static-routes option properly in dhclient-script :
    trailing 0 octets in the 'target' IP specify the class -
    ie '172.16.0.0 w.x.y.z' specifies '172.16/16 via w.x.y.z'.


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-7
changelog:
  - fix bug 169164: separate /var/lib/{dhcpd,dhclient} directories
  - fix bug 167292: update failover port info in dhcpd.conf.5; give
                    failover ports default values in server/confpars.c


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-6
changelog:
  - fix bug 167273: time-offset should not set timezone by default
                    tzdata's Etc/* files are named with reverse sign
                    for hours west - ie. 'GMT+5' is GMT offset -18000seconds.


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-4
changelog:
  - fix bug 166926: make dhclient-script handle interface-mtu option
    make dhclient-script support /etc/dhclient{,-$IF}-{up,down}-hooks scripts
    to allow easy customization to support other non-default DHCP options -
    documented in 'man 8 dhclient-script' .
  - handle the 'time-offset' DHCP option, requested by default.


author: Jason Vas Dias <jvdias@redhat.com> - 11:3.0.3-3
changelog:
  - fix bug 160655: strip trailing '\0' bytes from text options before append
  - fix gcc4 compiler warnings ; now compiles with -Werror
  - add RPM_OPT_FLAGS to link as suggested in gcc man-page on '-pie' option
  - change ISC version string to 'V3.0.3-RedHat' at request of ISC


author: Jason Vas Dias <jvdias@redhat.com> 11:3.0.3-1
changelog:
  - Upgrade to upstream version 3.0.3 
  - Don't apply the 'default boot file server' patch: legacy
    dhcp behaviour broke RFC 2131, which requires that the siaddr
    field only be non-zero if the next-server or tftp-server-name
    options are specified.
  - Try removing the 1-5 second wait on dhclient startup altogether.
  - fix bug 163367: supply default configuration file for dhcpd


author: Jason Vas Dias <jvdias@redhat.com> 10:3.0.3rc1-1
changelog:
  - Upgrade to upstream version 3.0.3rc1
  - fix bug 163203: silence ISC blurb on configtest 
  - fix default 'boot file server' value (packet->siaddr):
    In dhcp-3.0.2(-), this was defaulted to the server address;
    now it defaults to 0.0.0.0 (a rather silly default!) and
    must be specified with the 'next-server' option (not the tftp-boot-server
    option ?!?) which causes PXE boot clients to fail to load anything after
    the boot file.


author: Jason Vas Dias <jvdias@redhat.com> 10:3.0.2-14
changelog:
  - Fix bug 159929: prevent dhclient flooding network on repeated DHCPDECLINE
  - dhclient fast startup:
     remove dhclient's  random 1-5 second delay on startup if only
     configuring one interface
     remove dhclient_script's "sleep 1" on PREINIT
  - fix new gcc-4.0.0-11 compiler warnings for binding_state_t


author: Jason Vas Dias <jvdias@redhat.com> 10:3.0.2-11
changelog:
  - as pointed out by Peter Jones, dhclient-script spews
  - 'chkconfig: Usage' if run in init state 1 (runlevel returns "unknown".)
  - this is now corrected.


author: Jason Vas Dias <jvdias@redhat.com> 10:3.0.2-9
changelog:
  - bugs 153244 & 155143 are now fixed with SELinux policy; 
    autotrans now works for dhcpc_t, so restorecons are not required,
    and dhclient runs OK under dhcpc_t with SELinux enforcing.
  - fix bug 155506: 'predhclien' typo (emacs!).


author: Jason Vas Dias <jvdias@redhat.com> 10:3.0.2-8
changelog:
  - Fix bugs 153244 & 155143: 
        o restore dhclient-script 'restorecon's
        o give dhclient and dhclient-script an exec context of
          'system_u:object_r:sbin_t' that allows them to run
          domainname / hostname and to update configuration files
          in dhclient post script.
  - Prevent dhclient emitting verbose ISC 'blurb' on error exit in -q mode


author: Jason Vas Dias <jvdias@redhat.com> 10:3.0.2-7
changelog:
  - Add '-x' "extended option environment" dhclient argument:
  -  When -x option given to dhclient:
  -    dhclient enables arbitrary option processing by writing information
  -    about user or vendor defined option space options to environment.
  -
  - fix bug 153244: dhclient should not use restorecon
  - fix bug 151023: dhclient no 'headers & libraries' 
  - fix bug 149780: add 'DHCLIENT_IGNORE_GATEWAY' variable
  - remove all usage of /sbin/route from dhclient-script


author: Jason Vas Dias <jvdias@redhat.com> 8:3.0.2rc3-8
changelog:
  - Add better execshield security link options
  - fix dhcpd.init when no /etc/dhcpd.conf exists and -cf in DHCPDARGS


author: Jason Vas Dias <jvdias@redhat.com> 8:3.0.2rc3-4
changelog:
  - make dhclient-script TIMEOUT mode do exactly the same configuration
  - as BOUND / RENEW / REBIND / REBOOT if router ping succeeds


author: Jason Vas Dias <jvdias@redhat.com> 3.0.2rc3-4
changelog:
  - fix bug 147926: dhclient-script should do restorecon for modified conf files
  - optimize execshield protection


author: Jason Vas Dias <jvdias@redhat.com> 8.3.0.4rc3-3
changelog:
  - fix bug 147375: dhcpd heap corruption on 32-bit 'subnet' masks
  - fix bug 147502: dhclient should honor GATEWAYDEV and GATEWAY settings
  - fix bug 146600: dhclient's timeout mode ping should use -I
  - fix bug 146524: dhcpd.init should discard dhcpd's initial output message
  - fix bug 147739: dhcpd.init configtest should honor -cf in DHCPDARGS


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-17
changelog:
  - fix bug 144250: gcc-3.4.3-11 is broken :
  - log_error ("Lease with bogus binding state: %d size: %d",
  -   comp -> binding_state,
  -   sizeof(comp->binding_state));
  - prints:    'Lease with bogus binding state: 257 1'    !
  - compiling with gcc33 (compat-gcc-8-3.3.4.2 fixes for now).


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-16
changelog:
  - fix bug 143704: dhclient -r does not work if lease held by
  - dhclient run from ifup . dhclient will now look for the pid
  - files created by ifup.


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-14
changelog:
  - NTP: fix bug 139715: merge in new ntp servers only rather than replace
  - all the ntp configuration files; restart ntpd if configuration changed.


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-12
changelog:
  - fix bug 138181 & bug 139468: do not attempt to listen/send on
  -     unconfigured  loopback, point-to-point or non-broadcast
  -     interfaces (don't generate annoying log messages)
  - fix bug 138869: dhclient-script: check if '$new_routers' is
  -     empty before doing 'set $new_routers;...;ping ... $1'


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-11
changelog:
  - dhcp-3.0.2b1 came out today. A diff of the 'ack_lease' function
  - Dave Hankins and I patched exposed a missing '!' on an if clause
  - that got dropped with the 'new-host' patch. Replacing the '!'.
  - Also found one missing host_dereference.


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-10
changelog:
  - clean-up last patch: new-host.patch adds host_reference(host)
  - without host_dereference(host) before returns in ack_lease
  - (dhcp-3.0.1-host_dereference.patch)


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-9
changelog:
  - Fix bug 133522:
  - PXE Boot clients with static leases not given 'file' option
  - 104 by server - PXE booting was disabled for 'fixed-address'
  - clients.


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-8
changelog:
  - Fix bug 131212:
  - If "deny booting" is defined for some group of hosts,
  - then after one of those hosts is denied booting, all
  - hosts are denied booting, because of a pointer not being
  - cleared in the lease record. 
  - An upstream patch was obtained which will be in dhcp-3.0.2.


author: Jason Vas Dias <jvdias@redhat.com> 7:3.0.1-7
changelog:
  - Forward DNS update by client was disabled by a bug that I
  - found in code where 'client->sent_options' was being
  - freed too early.
  - Re-enabled it after contacting upstream maintainer
  - who confirmed that this was a bug (bug #130069) -
  - submitted patch dhcp-3.0.1.preserve-sent-options.patch.
  - Upstream maintainer informs me this patch will be in dhcp-3.0.2 .


author: Dan Walsh <dwalsh@redhat.com> 1:3.0.1rc14-1
changelog:
  - User kernelversion instead of uname-r
  - Update to latest package from ISC
  - Remove inherit-leases patch for now.


author: Elliot Lee <sopwith@redhat.com> 3.0pl1-8
changelog:
  - More #68650 (modify requested options)
  - Fix #71453 (dhcpctl man page) and #71474 (include libdst.a) and


author: David Sainty <saint@redhat.com> 3.0pl1-1
changelog:
  - Change to dhclient, dhcp, dhcp-devel packaging
  - Move to 3.0pl1, do not strip binaries
  - Drop in sysconfig-enabled dhclient-script


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix booting of JavaStations
    (reported by Pete Zaitcev <zaitcev@metabyte.com>).
  - fix SIGBUS crashes on SPARC (apparently gcc is too clever).


author: Erik Troan <ewt@redhat.com>
changelog:
  - applied patch from Chris Evans which makes the server a bit more paranoid
    about dhcp requests coming in from the wire


author: Erik Troan <ewt@redhat.com>
changelog:
  - updated to build in a buildroot properly
  - don't package up the client, as it doens't work very well <sigh>


author: Mike Wangsmo <wanger@redhat.com>
changelog:
  - removed the actual inet.d links (chkconfig takes care of this for us)
    and made the %postun section handle upgrades.


author: Miroslav Lichvar <mlichvar@redhat.com> - 1.1-3.20071028
changelog:
  - update to 1.1-20071028
  - fix multilib conflicts (#341001)
  - use shared library, drop static
  - merge review fixes (#225693)


author: Harald Hoyer <harald@redhat.com> - 1.1-1.20070227svn
changelog:
  - version 1.1-20070227
  - added devel subpackage
  - specfile fixes (bug#225693)
  - Resolves: rhbz#225693


author: Rex Dieter <rdieter[AT]fedoraproject.org> 1.0.0-6
changelog:
  - /var/log/dirmngr.log -> /var/log/dirmngr/dirmngr.log
  - remove use of %ghost (e.g. dirmngr.log shouldn't be owned)
  - BR: gettext


author: Rex Dieter <rexdieter[AT]users.sf.net> 0.9.4-1
changelog:
  - 0.9.4
  - %doc COPYING
  - drop upstreamed info patch
  - use logrotate on dirmngr.log
  - add comment to (previously) empty ldapservers.conf


author: Rex Dieter <rexdieter[AT]users.sf.net> 0.9.2-2
changelog:
  - drop BR: libgpg-error-devel, texinfo
  - drop goofy conditional 'make install-strip '
  - BR: libksba-devel >= 0.9.11
  - BR: libassuan-devel >= 0.6.8
  - fix spelling error(s) in %description
  - --disable-dependancy-tracking


author: Roman Rakus <rrakus@redhat.com> - 1.1.9-6
changelog:
  - rename functions as they conflict with glibc
  - Don't push cdda2mp3 because we don't have any mp3 coder
    Resolves: #505918


author: Roman Rakus <rrakus@redhat.com> - 1.1.8-1
changelog:
  - Version 1.1.8 - old patches included
                  - added bzip2-devel to build requirements
  - fixed #171510 - preserve directory permissions


author: Harald Hoyer <harald@redhat.com> - 1.1.6-4
changelog:
  - play stupid tricks, to let alternatives make the links and
    rpm not removing them afterwards
  - removed bogus warning for "." and ".."


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc16-7
changelog:
  - Create symlink from full versioned libdmraid dso files
    to libdmraid.so.1 and libdmraid-events-isw.so.1
    (ie. soname we use for linking)
  - Resolves: rhbz#557514


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc16-5
changelog:
  - Resolves: rhbz#554698
    SGPIO spare led is still in rebuilding state fix
  - Resolves rhbz#554700
    switch to using /var/cache/logwatch/dmeventd/syslogpattern.txt;
    explicitly claim logwatch files in dmraid-events-logwatch
  - Resolves rhbz#554708
    gets size of Silicon Image JBOD set wrong fix
  - Resolves rhbz#554710
    try to register non-existent dmeventd DSO fix


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc16-4
changelog:
  - bz526157: fix manual pages for dmraid.static and dm_dso_reg_tool
  - bz505562: ddf1 metadata format handler LSI persistent name fix
  - bz524168: fix pdc metadata format handler to report the correct number
    of devices in a RAID10 subset
  - bz528097: move libraries to /lib* in order to avoid catch22
    with unmountable /usr


author: Hans de Goede <hdegoede@redhat.com> - 1.0.0.rc16-3
changelog:
  - Add Obsoletes for dmraid-libs packages (merged into the main pkg, #524261)
  - Make -devel Require the main package now the dmraid-libs package is gone


author: Hans de Goede <hdegoede@redhat.com> - 1.0.0.rc15-7
changelog:
  - Fix activation of isw raid sets when the disks have serialnumber longer
    then 16 characters (#490121)


author: Hans de Goede <hdegoede@redhat.com> - 1.0.0.rc15-5
changelog:
  - Make --rm_partitions work with older kernels which return EINVAL when trying
    to remove a partition with a number > 16
  - Document --rm_partitions in the man page


author: Alasdair Kergon <agk@redhat.com> - 1.0.0.rc14-8
changelog:
  - Move library into libs subpackage.
  - Fix summary and licence tags.
  - Replace static build with symlink.


author: Ian Kent <ikent@redhat.com> - 1.0.0.rc14-6
changelog:
  - Bug 379911: dmraid needs to generate UUIDs for lib device-mapper
    - add "DMRAID-" prefix to dmraid UUID string.


author: Ian Kent <ikent@redhat.com> - 1.0.0.rc14-5
changelog:
  - Bug 379911: dmraid needs to generate UUIDs for lib device-mapper
  - Bug 379951: dmraid needs to activate device-mapper mirror resynchronization error handling


author: Alasdair Kergon <agk@redhat.com> - 1.0.0.rc14-2
changelog:
  - Add build dependency on new device-mapper-devel package.
  - Add dependency on device-mapper.
  - Add post and postun ldconfig.
  - Update BuildRoot and Summary.


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc14-1
changelog:
  - asr.c: fixed Adaptec HostRAID DDF1 metadata discovery (bz#211016)
  - ddf1_crc.c: added crc() routine to avoid linking to zlib alltogether,
                because Ubuntu had problems with this
  - dropped zlib build requirement


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc13-1
changelog:
  - metadata.c: fixed bug returning wrang unified RAID type (bz#210085)
  - pdc.c: fixed magic number check


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc12-1
changelog:
  - sil.c: quorate() OBO fix
  - activate.c: handler() OBO fix
  - added SNIA DDF1 support
  - added reload functionality to devmapper.c
  - added log_zero_sectors() to various metadata format handlers
  - sil.[ch]: added JBOD support


author: Peter Jones <pjones@redhat.com> - 1.0.0.rc11-FC6.2
changelog:
  - Fix bounds checking on hpt37x error log
  - Only build the .so, not the .a
  - Fix asc.c duplication in makefile rule


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc11-FC5_7.1
changelog:
  - jm.c: checksum() calculation
  - misc.c: support "%d" in p_fmt and fix segfault with wrong format identifier
  - nv.c: size fix in setup_rd()
  - activate.c:
          o striped devices could end on non-chunk boundaries
          o calc_region_size() calculated too small sizes causing large
            dirty logs in memory
  - isw.c: set raid5 type to left asymmetric
  - toollib.c: fixed 'No RAID...' message
  - support selection of RAID5 allocation algorithm in metadata format handlers
  - build


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc10-FC5_6
changelog:
  - add doc/dmraid_design.txt to %doc (#181885)
  - add --enable-libselinux --enable-libsepol to configure
  - rebuilt


author: Peter Jones <pjones@redhat.com> 1.0.0.rc9-FC5_2
changelog:
  - update to 1.0.0.rc9
  - make "make install" do the right thing with the DSO
  - eliminate duplicate definitions in the headers
  - export more symbols in the DSO
  - add api calls to retrieve dm tables
  - fix DESTDIR for 'make install' 
  - add api calls to identify degraded devices
  - remove several arch excludes


author: Heinz Mauelshagen <heinzm@redhat.com> 1.0.0.rc8-FC4_1
changelog:
  - nv.c: fixed stripe size
  - sil.c: avoid incarnation_no in name creation, because the Windows
           driver changes it every time
  - added --ignorelocking option to avoid taking out locks in early boot
    where no read/write access to /var is given


author: Heinz Mauelshagen <heinzm@redhat.com> 1.0.0.rc6.1-4_FC4
changelog:
  - VIA metadata format handler
  - added RAID10 to lsi metadata format handler
  - "dmraid -rD": file device size into {devicename}_{formatname}.size
  - "dmraid -tay": pretty print multi-line tables ala "dmsetup table"
  - "dmraid -l": display supported RAID levels + manual update
  - _sil_read() used LOG_NOTICE rather than LOG_INFO in order to
    avoid messages about valid metadata areas being displayed
    during "dmraid -vay".
  - isw, sil filed metadata offset on "-r -D" in sectors rather than in bytes.
  - isw needed dev_sort() to sort RAID devices in sets correctly.
  - pdc metadata format handler name creation. Lead to
    wrong RAID set grouping logic in some configurations.
  - pdc RAID1 size calculation fixed (rc6.1)
  - dos.c: partition table code fixes by Paul Moore
  - _free_dev_pointers(): fixed potential OOB error
  - hpt37x_check: deal with raid_disks = 1 in mirror sets
  - pdc_check: status & 0x80 doesn't always show a failed device;
    removed that check for now. Status definitions needed.
  - sil addition of RAID sets to global list of sets
  - sil spare device memory leak
  - group_set(): removal of RAID set in case of error
  - hpt37x: handle total_secs > device size
  - allow -p with -f
  - enhanced error message by checking target type against list of
    registered target types


author: Than Ngo <than@redhat.com> - 1.6.0-2
changelog:
  - fix #516339, allow to enable/disable timstamp to avoid the multilib issue
    HTMP_TIMESTAMP is disable by default


author: Harald Hoyer <harald@redhat.com> 004-13
changelog:
  - fixed multipath scanning
  - fixed NFS4 (rhbz#564293)
  - add /etc/dracut.conf.d config dir
  - fixed selinux disabled state
  - fixed s390 cio scripts
  - fixed lib64 check (rhbz#562113)
  - Resolves: rhbz#564293, rhbz#562113


author: Harald Hoyer <harald@redhat.com> 004-12
changelog:
  - add IPv6 support
  - fixed multipath check
  - fixed selinux autorelabel case
  - Resolves: rhbz#546615 rhbz#553195


author: Harald Hoyer <harald@redhat.com> 002-26
changelog:
  - add WITH_SWITCH_ROOT make flag
  - add fips requirement conditional
  - add more device mapper modules (bug #539656)


author: Harald Hoyer <harald@redhat.com> 002-22
changelog:
  - add module 90multipath
  - add module 01fips
  - renamed module 95ccw to 95znet (bug #533833)
  - crypt: ignore devices in /etc/crypttab (root is not in there)
  - dasd: only install /etc/dasd.conf in hostonly mode (bug #533833)
  - zfcp: only install /etc/zfcp.conf in hostonly mode (bug #533833)
  - kernel-modules: add scsi_dh scsi_dh_rdac scsi_dh_emc (bug #527750)
  - dasd: use dasdconf.sh from s390utils (bug #533833)


author: Harald Hoyer <harald@redhat.com> 002-18
changelog:
  - renamed lvm/device-mapper udev rules according to upstream changes
  - fixed dracut search path issue


author: Harald Hoyer <harald@redhat.com> 002-13
changelog:
  - fixed init=<command> handling
  - kill loginit if "rdinitdebug" specified
  - run dmsquash-live-root after udev has settled (bug #527514)


author: Harald Hoyer <harald@redhat.com> 002-10
changelog:
  - do not destroy assembled raid arrays if mdadm.conf present
  - mount /dev/shm 
  - let udevd not resolve group and user names
  - preserve timestamps of tools on initramfs generation
  - generate symlinks for binaries correctly
  - moved network from udev to initqueue
  - mount nfs3 with nfsvers=3 option and retry with nfsvers=2
  - fixed nbd initqueue-finished
  - improved debug output: specifying "rdinitdebug" now logs
    to dmesg, console and /init.log
  - stop udev before killing it
  - add ghost /var/log/dracut.log
  - dmsquash: use info() and die() rather than echo
  - strip kernel modules which have no x bit set
  - redirect stdin, stdout, stderr all RW to /dev/console
    so the user can use "less" to view /init.log and dmesg


author: Warren Togami <wtogami@redaht.com> 002-5
changelog:
  - Revert back to -3, Add umount back to initrd
    This makes no functional difference to LiveCD.  See Bug #525319


author: Harald Hoyer <harald@redhat.com> 002-3
changelog:
  - bail out if selinux policy could not be loaded and 
    selinux=0 not specified on kernel command line 
    (bug #524113)
  - set finished criteria for dmsquash live images


author: Harald Hoyer <harald@redhat.com> 001-10
changelog:
  - add ifname= argument for persistent netdev names
  - new /initqueue-finished to check if the main loop can be left
  - copy mdadm.conf if --mdadmconf set or mdadmconf in dracut.conf


author: Harald Hoyer <harald@redhat.com> 001-8
changelog:
  - plymouth: use plymouth-populate-initrd
  - add add_drivers for dracut and dracut.conf
  - do not mount /proc and /selinux manually in selinux-load-policy


author: Harald Hoyer <harald@redhat.com> 001-1
changelog:
  - version 001
  - see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS


author: Harald Hoyer <harald@redhat.com> 0.8-1
changelog:
  - version 0.8 
  - see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS


author: Harald Hoyer <harald@redhat.com> 0.7-1
changelog:
  - version 0.7
  - see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS


author: Harald Hoyer <harald@redhat.com> 0.6-1
changelog:
  - version 0.6
  - see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS


author: Harald Hoyer <harald@redhat.com> 0.5-1
changelog:
  - version 0.5
  - see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS


author: Harald Hoyer <harald@redhat.com> 0.4-1
changelog:
  - version 0.4
  - see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS


author: Harald Hoyer <harald@redhat.com> 0.3-1
changelog:
  - version 0.3
  - see http://dracut.git.sourceforge.net/git/gitweb.cgi?p=dracut/dracut;a=blob_plain;f=NEWS


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 0.13.2d-38
changelog:
  - Untabify spec file
  - Ensure dvipdft is not executeable in SRPM
  - Ensure man pages are UTF-8
  - Fix comment about tex(tex)


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 0.13.2d-37
changelog:
  - Fix comment about texlive-texmf [tex(tex)] BuildRequires
  - Rename config file tp dvipdfm-config in SRPM
  - Add INSTALL='install -p' to makeinstall
  - Run mktexlsr on install


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 0.13.2d-36
changelog:
  - Fix URL
  - Cherry pick changes made by TeXLive 2007
  - Build dvi and pdf docs
  - Add Requires for tex(tex)
  - Add security fix patches for temp file creation


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 0-0.30.20090708cvs
changelog:
  - Add dvipdfmx-20090708-ebb-to-ebbx.patch to rename ebb to ebbx to avoid file
    conflict with ebb package


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 0-0.23.20080520cvs
changelog:
  - Added dvipdfmx-20080520-ebb-to-ebbx.patch to rename ebb to ebbx to stop
    conflict with dvipdfm package (BZ #448347)


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 0-0.21.20080520cvs
changelog:
  - Update to snapshot 20080520
  - Move config to dvipdfmx directory (rather than dvipdfm) as required by this snapshot


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 0-0.20.20071115cvs
changelog:
  - Remove obsolete and Provides for dvipdfm
  - Explicitly list contents of bindir in file list
  - Fix version and release tags to be guideline conforming
  - Add INSTALL='install -p' to make install
  - Add macro definitions from texlive-texmf spec file in case not defined
  - Remove NEWS and TODO from doc file list


author: Jeff Johnston <jjohnstn@redhat.com> 1:6.0.1-9
changelog:
  - Resolves: #546784
  - Fix URLs for Autotools and Libhover which are fetched here.
  - Make fetch scripts sources.


author: Jeff Johnston <jjohnstn@redhat.com> 1:6.0.1-7
changelog:
  - Resolves: #546784
  - Rebase Autotools to Linux tools 0.4.0 release plus patches.
  - Rebase Libhover to Linux tools 0.4.0 release.
  - Remove Libhover patch which is already part of rebase.


author: Jeff Johnston <jjohnstn@redhat.com> 1:6.0.1-2
changelog:
  - Ship new parsers sub-package which includes xlc, upc, and lrparser plug-ins.
  - Require lpg-java-compat for build.


author: Jeff Johnston <jjohnstn@redhat.com> 1:6.0.0-10
changelog:
  - Resolves #290247
  - Upgrade libhover to 0.3.0.
  - Add libhover patch to fix libstdc++ member resolution and
    to place libhover docs locally within libhover plugin.


author: Jeff Johnston <jjohnstn@redhat.com> 6.0.0-1
changelog:
  - Rebase CDT to 6.0.0.
  - Rebase Autotools to v200906171600 snapshot.
  - Resolves #280504, #280505, #280506, #280509.


author: Jeff Johnston <jjohnstn@redhat.com> 5.0.1-2
changelog:
  - Rebase libhover to 0.1.1 and autotools to 1.0.2.
  - Remove patch for 472731 which is already part of rebased autotools sources.


author: Jeff Johnston <jjohnstn@redhat.com> 5.0.0-12
changelog:
  - Fix typo in autotools and libhover sources tarballs.
  - Remove redundant patches which are already in new tarballs.


author: Jeff Johnston <jjohnstn@redhat.com> 5.0.0-11
changelog:
  - Fix managed configurations dialog problem.
  - Update libhover and autotools source tarballs to 20081106 snapshot.


author: Jeff Johnston <jjohnstn@redhat.com> 5.0.0-10
changelog:
  - Change runtests section to remove new libhover plugin rather than old
    com.redhat.* autotools plugin.


author: Jeff Johnston <jjohnstn@redhat.com> 5.0.0-8
changelog:
  - Fix org.eclipse.linuxtools.libhover.feature to include
    org.eclipse.linuxtools.libhover.library_docs plugin.
  - Add work-around patch for managed configurations dialog problem.


author: Jeff Johnston <jjohnstn@redhat.com> 5.0.0-7
changelog:
  - Change to use new linuxtools version of autotools-1.0.1.
  - Add build of libhover plugins again from linuxtools.


author: Andrew Overholt <overholt@redhat.com> 5.0.0-4
changelog:
  - Add building and running of tests
  - Remove LexerTests until 5.0.1
  - Fix fetch script to use new location of PDE Build


author: Jeff Johnston <jjohnstn@redhat.com> 5.0.0-2
changelog:
  - Add autotools 1.0.0 which supports CDT 5.0.
  - Use java -cp to build cdt and autotools instead of eclipse -nosplash.
  - Replace fetched source with CDT_5_0_0 tagged sources.


author: Andrew Overholt <overholt@redhat.com> 5.0.0-1
changelog:
  - Remove master and testing features
  - Move files to dropins/cdt{,-mylyn,-sdk}/eclipse
  - Generate p2 metadata


author: Andrew Overholt <overholt@redhat.com> 5.0.0-1
changelog:
  - 5.0
  - Add Mylyn sub-package
  - Disable CPPUnit for now
  - Disable autotools until a new snapshot is made that will build with 5.0


author: Jeff Johnston <jjohnstn@redhat.com> 4.0.3-1
changelog:
  - Rebase to CDT 4.0.3
  - Patch openpty code to not reference stropts.h which is no longer shipped
  - Update eclipse-cdt-no-tests.patch


author: Jeff Johnston <jjohnstn@redhat.com> 4.0.1-4
changelog:
  - Update autotools to 0.9.6
  - Includes generic shell script support for makefile generation on
    different platforms


author: Jeff Johnston <jjohnstn@redhat.com> 4.0.1-3
changelog:
  - Resolves #412651, #412661, #385991 
  - Rebase autotools to 0.9.5.3
  - Adds glibc C library completion support.
  - Fix clean by removal option.
  - Add support for changes to configure/autogen command names.
  - Add gcj checks for %post and %postun steps.


author: Jeff Johnston <jjohnstn@redhat.com> 4.0.0-3
changelog:
  - Resolves #251412
  - Rebase autotools to 0.9.2
  - Add minimum java runtime requirement
  - Add direct Autotools wizards
  - Add autogen.sh options


author: Jeff Johnston <jjohnstn@redhat.com> 3.1.2-1
changelog:
  - Rebase CDT to 3.1.2.
  - Rebase autotools to 0.0.8 source.
  - Replace subconsole patch with new build console patch.


author: Jeff Johnston <jjohnstn@redhat.com> 3.1.1-7
changelog:
  - Resolves: #222350
  - Rebase autotools to 0.0.6.1 source.
  - Add comments.
  - Put arch-specific jars in library dir.


author: Ben Konrath <bkonrath@redhat.com> 3.1.1-3
changelog:
  - Remove work-around for gcc bug # 20198.
  - Do not include notice.html and epl-v10.html because these files are already
    included in the SDK.
  - Put JNI libraries in %{_libdir}/eclipse.
  - Only build the CDT SDK.
  - Fix build issue on non-x86 systems.
  - Resolves: #208622


author: Jeff Johnston <jjohnstn@redhat.com> 3.1.0-3
changelog:
  - Add hover help for defined symbols
  - Fix bug with defined symbol calculation on file that compilation
    string cannot be fetched for


author: Jeff Johnston <jjohnstn@redhat.com> 3.1.0-1jpp_13fc
changelog:
  - Rebase autotools to 0.0.4 source.
  - Use ScannerInfoProvider extension instead of DynamicScannerInfoProvider.
  - Add sub-console support to CDT.


author: Jeff Johnston <jjohnstn@redhat.com> 3.1.0-1jpp_12fc
changelog:
  - Fix build special targets when project hasn't configured yet.
  - Fix to fully reconfigure after configuration options change.
  - Fix configuration problem whereby config.sub complains.
  - Bugzilla 200000, 201270, 203440


author: Jeff Johnston <jjohnstn@redhat.com> 3.1.0-1jpp_11fc
changelog:
  - Fix Build Special Targets bug when importing a CVS project and
    using ManagedMake Project Wizard.
  - Bugzilla 201269


author: Andrew Overholt <overholt@redhat.com> 3.1.0-0jpp_0fc.3.1.0RC2
changelog:
  - 3.1.0 RC2.
  - Remove unused hover patch.
  - Use newly-created versionless pde.build symlink.
  - Remove no-sdkbuild patch.


author: Andrew Overholt <overholt@redhat.com> 3.0.0_fc-0.RC2.1
changelog:
  - Import new upstream version (3.0RC2).
  - Use gbenson's new aot-compile-rpm and change requirements appropriately.
  - Re-enable native compilation - let's see what happens.


author: Jeff Pound <jpound@redhat.com> 3.0.0_fc-0.M6.8
changelog:
  - Patch refactoring/build.properties to include plugin.properties.
  - Temporarily move all *.so's to *.so.bak due to native compilation bug.
  - Temporarily remove gcj .jar -> .so db population.


author: Phil Muldoon <pmuldoon@redhat.com> 3.0.0_fc-0.M6.5
changelog:
  - Changed to find-and-aot-compile build usage
  - Added "if gcj_support" toggle
  - Fixed installing all arch fragments (now only installs one (correct) arch)
  - Redid BuildRequires and Requires to remove old/unneeded dependencies
  - Cleaned %eclipse_arch declares.


author: Phil Muldoon <pmuldoon@redhat.com> 3.0.0_fc-0.M6.1
changelog:
  - Fixed db path in java -cp
  - Regenerated tarball from M6 canditate build
  - Reworked patches for M6 canditate Build


author: Phil Muldoon <pmuldoon@redhat.com> 3.0.0_fc-0.M5.4
changelog:
  - Changed Requires eclipse-ui to eclipse-platform
  - Added Requires java-1.4.2-gcj-compat >= 1.4.2.0-40jpp_14rh
  - Added Requires gcc-java >= 4.0.0-0.35


author: Phil Muldoon <pmuldoon@redhat.com> 3.0.0-1
changelog:
  - Updated to upstream CDT 3.0.0 M5 sources
  - Removed Source1 (rhdocs) for now
  - Removed libhover patch until updated
  - Added eclipse-cdt-platform-build-linux.patch
  - Added eclipse-cdt-sdk-build-linux.patch
  - Stopped tests build for now (Added eclipse-cdt-no-tests.patch)
  - Added Requires gcc-java (bz# 151866)
  - Added new central db logic


author: Phil Muldoon <pmuldoon@redhat.com> 2.0.2-2
changelog:
  - Moved upstream sources back to 2.0.2
  - Revered back to releng build
  - Added native build sections to spec file


author: Ben Konrath <bkonrath@redhat.com> 2.1.0-1
changelog:
  - add devel rpm and use the patched sources for it
  - update sources to 2.1.0
  - new build method that does not require pre-fetched sources


author: Ben Konrath <bkonrath@redhat.com> 2.0.2-1
changelog:
  - Update sources to 2.0.2
  - Change which files are unzipped in the install phase - this changed in 2.0.2
  - Update Red Hat documentation sources
  - Remove no-cvs-patch as it is no longer needed (no-cvs2-patch is still needed)
  - Update ui-libhover-patch 
  - Add how-to document for doc and source tarball generation
  - Add fetch-tests-patch for tarball generation


author: Jeremy Handcock <handcock@redhat.com> 2.0-3
changelog:
  - Add Red Hat-specific documentation
  - Use `name' macro in source and patch names
  - Correct BuildRequires to eclipse-platform


author: Jeremy Handcock <handcock@redhat.com> 2.0-2
changelog:
  - Update sources to include tests from upstream
  - Add new build patch for CDT tests
  - Build CDT tests, but don't install them


author: Mat Booth <fedora@matbooth.co.uk> 2.5.0-1
changelog:
  - Update to 2.5.0 final release (Galileo).
  - Build the features seperately to allow for a saner %files section.


author: Mat Booth <fedora@matbooth.co.uk> 2.4.1-2
changelog:
  - Build example installer plugins using the source from the tarball instead of
    trying to get the examples from source control a second time.


author: Mat Booth <fedora@matbooth.co.uk> 2.4.1-1
changelog:
  - Initial release, based on eclipse-gef spec file, but with disabled AOT
    compiled bits because of RHBZ #477707.


author: Mat Booth <fedora@matbooth.co.uk> 3.5.0-1
changelog:
  - Update to 3.5.0 final release (Galileo).
  - Build the features seperately to allow for a saner %files section.
  - Use %global instead of %define.


author: Mat Booth <fedora@matbooth.co.uk> 3.4.1-1
changelog:
  - New maintainer.
  - Updated to verion 3.4.1.
  - Update package for new Eclipse plugin guidelines.
  - Own the gcj/%{name} directory.
  - The 'examples.ui.pde' plugin is actually part of the SDK feature.


author: Andrew Overholt <overholt@redhat.com> 3.2.1-3
changelog:
  - Use copy-platform in %{_libdir}.
  - Use binary launcher rather than startup.jar to guard against future
    osgi.sharedConfiguration.area changes.


author: Ben Konrath <bkonrath@redhat.com> 3.1.1-1jpp_1rh
changelog:
  - Add devel package. 
  - Update sources to 3.1.1.
  - Some general spec file cleanup.
  - Add patch to stop the gefbuilder plugin from setting bootclasspath.
  - Change copyright to license.
  - Add instructions for generating source drop.


author: Aaron Luchko <aluchko@redhat.com>
changelog:
  - Updated to 3.1.0
  - added createTarball.sh, gefSource.sh, and build.xml.patch
  - added native build
  - changes to use eclipsebuilder
  - fixes from Matthias Saou


author: Sean Flanigan <sflaniga@redhat.com> - 3.5.0.v20090423085802-1
changelog:
  - Updated from upstream; added Estonian.
  - Fixed names/descriptions for languages with two word names such as "Portuguese (Brazilian)".
  - Added Babel metadata files (artifact.jar and content.jar) to make P2 happier (presently disabled)
  - Made the base package owner of dropins/babel and subdirectories


author: Sean Flanigan <sflaniga@redhat.com> - 3.5.0.v20090417091040-1
changelog:
  - Updated to use Babel's zipped langpacks instead of fetch-babel.sh
  - Changed versioning scheme to match changes in upstream versioning
  - Updated to latest upstream langpacks for Eclipse 3.5 / Galileo


author: Sean Flanigan <sflaniga@redhat.com> - 0.2.0-0.4.20080807snap
changelog:
  - Applied Jens Petersen's suggested patch to remove eclipse_version macro and 
    unnecessary buildroot checks


author: Sean Flanigan <sflaniga@redhat.com> - 0.2.0-0.3.20080807snap
changelog:
  - Added eclipse_version macro
  - Changed the Obsoletes version to be slightly higher than the last release of 
    eclipse-sdk-nls


author: Sean Flanigan <sflaniga@redhat.com> - 0.2.0-0.2.20080807snap
changelog:
  - Fixed version in changelog
  - Updated snapshot of Babel translation plugins
  - Changed code for Hebrew to he (not iw); changed fetch-babel.sh to compensate
  - Renamed eclipse_base macro to eclipse_data


author: Michal Nowak <mnowak@redhat.com> 1:1.4.2-2
changelog:
  - %defattr(-,root,root,-) for mylyn sub-package
  - Disable building -debuginfo due to psyco problems; resolves: rhbz#483357


author: Alexander Kurtakov <akurtako@redhat.com> 1:1.4.0-1
changelog:
  - Update to 1.4.0 - adds support for Python 2.6/3.0.
  - Use system jakarta-commons-logging and xmlrpc3.
  - Drop arch checks for mylyn - it is noarch now.


author: Alexander Kurtakov <akurtako@redhat.com> 1:1.3.20-2
changelog:
  - Drop gcj support.
  - Split mydev support to subpackage to correct dependencies.
  - Drop eclipse-mylyn-ide BR - it is merged into eclipse-mylyn.


author: Michal Nowak <mnowak@redhat.com> 1:1.3.20-1
changelog:
  - bump to 1.3.20
  - created general versioning scheme for version tag & tarball URI)
  - sed: /usr/local/bin/python -> /usr/bin/env python in Jython's cgi.py
  - convert .py$ files from mode 0644 to mode 0755
  - possibility to convert '\r\n' end-of-lines to *nix-like '\n'
    in all '.py$' files


author: Andrew Overholt <overholt@redhat.com> 1:1.3.18-1
changelog:
  - 1.3.18
  - Update for building with Eclipse SDK 3.4
  - Back-port patch from HEAD for building against Eclipse SDK 3.4


author: Andrew Overholt <overholt@redhat.com> 1:1.3.1-4
changelog:
  - Remove some whitespace, fix lines > 80 characters.
  - Remove unnecessary rm of junit.jar.
  - pushd to a deeper directory to fix long lines.
  - Add missing popd.
  - Typo in buildroot.


author: Igor Foox <ifoox@redhat.com> 1:1.3.1-2
changelog:
  - Add Jython as a BuildRequires and Requires.
  - Fix buildroot.
  - Add dist tag.
  - Remove pkg_summary and eclipse_name macros.
  - Remove eclipse-jdt and eclipse-pde from BR as they are required by PDE.
  - Fix permissions on defattr.
  - Fix long lines.
  - Renumber and comment patches.
  - Update and simplify source drop generation comment.


author: Igor Foox <ifoox@redhat.com> 1:1.3.0-1
changelog:
  - Update to version 1.3.0.
  - Update fetch script to include refactoring package.
  - Fixeup changelog epochs.
  - Remove #! lines from .py files.


author: Igor Foox <ifoox@redhat.com> 1:1.2.5-2
changelog:
  - Update to version 1.2.5.
  - Include Jython functionality again.
  - Fix spacing issues.
  - Remove backport to Java 1.4.
  - Change build method to package-build.
  - Include script to create the tarball.


author: Igor Foox <ifoox@redhat.com> 1:1.1.0-1
changelog:
  - Updated to version 1.1.0 (still backported)
  - Excluded Jython functionality
  - Removed _fc from version
  - Indented


author: Jeff Pound <jpound@redhat.com> 1:0.9.3_fc-9
changelog:
  - Fix eclipse build specification to be arch independant.
  - Fix build.properties javacDebugInfo flag (Robin Green bz#161534)
  - Add -g compile option (Robin Green bz#161534)


author: Jeff Pound <jpound@redhat.com> 1:0.9.3_fc-8
changelog:
  - Apply Robin Greens patch to explicitly specify archive format (bz#162517)
  - Fix spec file description.


author: Jeff Pound <jpound@redhat.com> 1:0.9.3_fc-6
changelog:
  - Swap zip logic for tarball logic.
  - Upgrade to 0.9.3.
  - Remove 3.1 compat patch (included in 0.9.3).


author: Jeffrey Pound <jpound@redhat.com> 1:0.9.0-3_fc
changelog:
  - Rewrite for native build.
  - Change gcc4 to gcc.
  - Add python as requirement.
  - Remove -g option for gcj.


author: Michal Hlavinka <mhlavink@redhat.com> 75-1
changelog:
  - removed executable permission from ecryptfs-dot-private (#500817)
  - require cryptsetup-luks for encrypted swap (#500824)
  - use blkid instead of vol_id (#500820)
  - don't rely on cryptdisks service (#500829)
  - add icon for Access-Your-Private-Data.desktop file


author: Michal Hlavinka <mhlavink@redhat.com> 73-1
changelog:
  - updated to 73
  - move libs from /usr/lib to /lib (#486139)
  - fix symlinks created by ecryptfs-setup-private (#486146)


author: Michal Hlavinka <mhlavink@redhat.com> 70-1
changelog:
  - updated to 70
  - fix: #479762 - ecryptfsecryptfs-setup-private broken
  - added umount option to clear per-user keyring


author: Mike Halcrow <mhalcrow@us.ibm.com> 61-0
changelog:
  - Add support for filename encryption enablement (future kernel feature)
  - Replace uint32_t with size_t for x86_64 compatibility (patch by Eric Sandeen)


author: Mike Halcrow <mhalcrow@us.ibm.com> 58-0
changelog:
  - TSPI key module update to avoid flooding TrouSerS library with requests
  - OpenSSL key module parameter fixes
  - Updates to mount-on-login utilities


author: Mike Halcrow <mhalcrow@us.ibm.com> 38-0
changelog:
  - Fix passthrough mount option prompt
   - Clarify man page
   - Add HMAC option (for future kernel versions)
   - Bump to version 38


author: Mike Halcrow <mhalcrow@us.ibm.com> - 17-0
changelog:
  - Provide built-in fallback passphrase key module. Remove keyutils,
    openssl, and pam requirements (library dependencies take care of
    this). Include wrapped passphrase executables in file set.


author: Mike Halcrow <mhalcrow@us.ibm.com> - 10-0
changelog:
  - Remove verbose syslog() calls; change key module build to allow
    OpenSSL module to be disabled from build; add AUTHORS, NEWS, and
    THANKS to docs; update Requires with variables instead of hardcoded
    name and version.


author: Mike Halcrow <mhalcrow@us.ibm.com> - 9-1
changelog:
  - Minor update in README, add dist tag to Release, add --disable-rpath
    to configure step, and remove keyutils-libs from Requires.


author: Mike Halcrow <mhalcrow@us.ibm.com> - 8-0
changelog:
  - Introduce build support for openCryptoki key module.  Fix -dev build
    dependencies for devel package


author: Aristeu Rozanski <arozansk@redhat.com> 0.9-1
changelog:
  - Updated version to 0.9, separate project now
  - Updated spec file based on upstream edac-utils spec file
  - Removed driver loading portion in a separate patch, it'll be removed from
    upstream too
  - Fixed init script to use functions and daemon function


author: Aristeu Rozanski <arozansk@redhat.com> 20061222-3
changelog:
  - Updated initrd script to start after syslogd, otherwise if the board isn't
    supported, the user will never know.


author: Roland McGrath <roland@redhat.com> - 0.144-1
changelog:
  - Update to 0.144
    - libdw: New function dwarf_aggregate_size for computing (constant) type
             sizes, including array_type cases with nontrivial calculation.
    - readelf: Don't give errors for missing info under -a.
               Handle Linux "VMCOREINFO" notes under -n.


author: Roland McGrath <roland@redhat.com> - 0.143-1
changelog:
  - Update to 0.143
    - libdw: Various convenience functions for individual attributes now use
             dwarf_attr_integrate to look up indirect inherited attributes.
             Location expression handling now supports DW_OP_implicit_value.
    - libdwfl: Support automatic decompression of files in XZ format,
               and of Linux kernel images made with bzip2 or LZMA
               (as well as gzip).


author: Roland McGrath <roland@redhat.com> - 0.142-1
changelog:
  - Update to 0.142
    - libelf: Bug fix in filling gaps between sections. (#512840)
    - libelf: Add elf_getshdrnum alias for elf_getshnum and elf_getshdrstrndx
              alias for elf_getshstrndx and deprecate original names.
    - libebl, elflint: Add support for STB_GNU_UNIQUE. (#511436)
    - readelf: Add -N option, speeds up DWARF printing
               without address->name lookups. (#505347)
    - libdw: Add support for decoding DWARF CFI into location description form.
             Handle some new DWARF 3 expression operations previously omitted.
             Basic handling of some new encodings slated for DWARF 4.


author: Roland McGrath <roland@redhat.com> - 0.141-1
changelog:
  - Update to 0.141
    - libebl: sparc backend fixes (#490585)
              some more arm backend support
    - libdwfl: fix dwfl_module_build_id for prelinked DSO case (#489439)
               fixes in core file support (#494858)
               dwfl_module_getsym interface improved for non-address symbols
    - eu-strip: fix infinite loop on strange inputs with -f
    - eu-addr2line: take -j/--section=NAME option for binutils compatibility
                    (same effect as '(NAME)0x123' syntax already supported)
  - Resolves: RHBZ #495213, RHBZ #465872, RHBZ #470055, RHBZ #484623


author: Roland McGrath <roland@redhat.com> - 0.139-1
changelog:
  - Update to 0.139
    - libcpu: Add Intel SSE4 disassembler support
    - readelf: Implement call frame information and exception handling dumping.
               Add -e option.  Enable it implicitly for -a.
    - elflint: Check PT_GNU_EH_FRAME program header entry.
    - libdwfl: Support automatic gzip/bzip2 decompression of ELF files. (#472136)


author: Roland McGrath <roland@redhat.com> - 0.138-1
changelog:
  - Update to 0.138
    - Install <elfutils/version.h> header file for applications to use in
      source version compatibility checks.
    - libebl: backend fixes for i386 TLS relocs; backend support for NT_386_IOPERM
    - libcpu: disassembler fixes (#469739)
    - libdwfl: bug fixes (#465878)
    - libelf: bug fixes
    - eu-nm: bug fixes for handling corrupt input files (#476136)


author: Roland McGrath <roland@redhat.com> - 0.137-2
changelog:
  - Update to 0.137
    - libdwfl: bug fixes; new segment interfaces;
               all the libdwfl-based tools now support --core=COREFILE option
  - Resolves: RHBZ #325021, RHBZ #447416


author: Roland McGrath <roland@redhat.com> - 0.135-1
changelog:
  - Update to 0.135
    - libdwfl: bug fixes
    - eu-strip: changed handling of ET_REL files wrt symbol tables and relocs


author: Roland McGrath <roland@redhat.com> - 0.134-1
changelog:
  - Update to 0.134
    - elflint: backend improvements for sparc, alpha (#204170)
    - libdwfl, libelf: bug fixes (#439344, #438867, #438263, #438190)
  - Remove Conflicts: libelf-devel from elfutils-libelf-devel. (#435742)


author: Roland McGrath <roland@redhat.com> - 0.133-2
changelog:
  - Update to 0.133
    - readelf, elflint, libebl: SHT_GNU_ATTRIBUTE section handling (readelf -A)
    - readelf: core note handling for NT_386_TLS, NT_PPC_SPE, Alpha NT_AUXV
    - libdwfl: bug fixes and optimization in relocation handling
    - elfcmp: bug fix for non-allocated section handling
    - ld: implement newer features of binutils linker.
  - Install eu-objdump and libasm, now has limited disassembler support.


author: Roland McGrath <roland@redhat.com> - 0.132-3
changelog:
  - Update to 0.132
    - libelf: Use loff_t instead of off64_t in libelf.h header. (#377241)
    - eu-readelf: Fix handling of ET_REL files in archives.
    - libcpu: Implement x86 and x86-64 disassembler.
    - libasm: Add interface for disassembler.
    - all programs: add debugging of branch prediction.
    - libelf: new function elf_scnshndx.


author: Roland McGrath <roland@redhat.com> - 0.131-1
changelog:
  - Update to 0.131
    - libdw: DW_FORM_ref_addr support; dwarf_formref entry point now deprecated;
             bug fixes for oddly-formatted DWARF
    - libdwfl: bug fixes in offline archive support, symbol table handling;
               apply partial relocations for dwfl_module_address_section on ET_REL
    - libebl: powerpc backend support for Altivec registers


author: Roland McGrath <roland@redhat.com> - 0.130-1
changelog:
  - Update to 0.130
    - eu-readelf -p option can take an argument like -x for one section
    - eu-readelf --archive-index (or -c)
    - eu-readelf -n improved output for core dumps
    - eu-readelf: handle SHT_NOTE sections without requiring phdrs (#249467)
    - eu-elflint: ditto
    - eu-elflint: stricter checks on debug sections
    - eu-unstrip: new options, --list (or -n), --relocate (or -R)
    - libelf: new function elf_getdata_rawchunk, replaces gelf_rawchunk;
              new functions gelf_getnote, gelf_getauxv, gelf_update_auxv
    - libebl: backend improvements (#324031)
    - libdwfl: build_id support, new functions for it
    - libdwfl: dwfl_module_addrsym fixes (#268761, #268981)
    - libdwfl offline archive support, new script eu-make-debug-archive


author: Roland McGrath <roland@redhat.com> - 0.129-1
changelog:
  - Update to 0.129
    - readelf: new options --hex-dump (or -x), --strings (or -p) (#250973)
    - addr2line: new option --symbols (or -S)
    - libdw: dwarf_getscopes fixes (#230235)
    - libdwfl: dwfl_module_addrsym fixes (#249490)


author: Roland McGrath <roland@redhat.com> - 0.128-2
changelog:
  - Update to 0.128
    - new program: unstrip
    - elfcmp: new option --hash-inexact
  - Replace Conflicts: with Provides/Requires using -arch


author: Roland McGrath <roland@redhat.com> - 0.127-1
changelog:
  - Update to 0.127
    - libdw: new function dwarf_getsrcdirs
    - libdwfl: new functions dwfl_module_addrsym, dwfl_report_begin_add,
               dwfl_module_address_section


author: Roland McGrath <roland@redhat.com> - 0.126-1
changelog:
  - Update to 0.126
    - New program eu-ar.
    - libdw: fix missing dwarf_getelf (#227206)
    - libdwfl: dwfl_module_addrname for st_size=0 symbols (#227167, #227231)


author: Roland McGrath <roland@redhat.com> - 0.125-1
changelog:
  - Update to 0.125
    - elflint: Compare DT_GNU_HASH tests.
    - move archives into -static RPMs
    - libelf, elflint: better support for core file handling
    - Really fix libdwfl sorting of modules with 64-bit addresses (#220817).
  - Resolves: RHBZ #220817, RHBZ #213792


author: Roland McGrath <roland@redhat.com> - 0.124-1
changelog:
  - eu-strip -f: copy symtab into debuginfo file when relocs use it (#203000)
  - Update to 0.124
    - libebl: fix ia64 reloc support (#206981)
    - libebl: sparc backend support for return value location
    - libebl, libdwfl: backend register name support extended with more info
    - libelf, libdw: bug fixes for unaligned accesses on machines that care
    - readelf, elflint: trivial bugs fixed


author: Roland McGrath <roland@redhat.com> 0.123-1
changelog:
  - Update to 0.123
    - libebl: Backend build fixes, thanks to Stepan Kasal.
    - libebl: ia64 backend support for register names, return value location
    - libdwfl: Handle truncated linux kernel module section names.
    - libdwfl: Look for linux kernel vmlinux files with .debug suffix.
    - elflint: Fix checks to permit --hash-style=gnu format.


author: Roland McGrath <roland@redhat.com> - 0.122-3
changelog:
  - Update to 0.122
    - Fix libdwfl sorting of modules with 64-bit addresses (#198225).
    - libebl: add function to test for relative relocation
    - elflint: fix and extend DT_RELCOUNT/DT_RELACOUNT checks
    - elflint, readelf: add support for DT_GNU_HASH
    - libelf: add elf_gnu_hash
    - elflint, readelf: add support for 64-bit SysV-style hash tables
    - libdwfl: new functions dwfl_module_getsymtab, dwfl_module_getsym.


author: Roland McGrath <roland@redhat.com> - 0.121-1
changelog:
  - Update to 0.121
    - libelf: bug fixes for rewriting existing files when using mmap (#187618).
    - make all installed headers usable in C++ code (#193153).
    - eu-readelf: better output format.
    - eu-elflint: fix tests of dynamic section content.
    - libdw, libdwfl: handle files without aranges info.


author: Roland McGrath <roland@redhat.com> - 0.120-2
changelog:
  - Update to 0.120
    - License changed to GPL, with some exceptions for using
      the libelf, libebl, libdw, and libdwfl library interfaces.
      Red Hat elfutils is an included package of the Open Invention Network.
    - dwarf.h updated for DWARF 3.0 final specification.
    - libelf: Fix corruption in ELF_C_RDWR uses (#187618).
    - libdwfl: New function dwfl_version; fixes for offline.


author: Roland McGrath <roland@redhat.com> - 0.118-1
changelog:
  - update to 0.118
    - elflint: more tests.
    - libdwfl: New function dwfl_module_register_names.
    - libebl: New backend hook for register names.
  - Make sure -fexceptions is always in CFLAGS.


author: Roland McGrath <roland@redhat.com> - 0.117-2
changelog:
  - update to 0.117
    - libdwfl: New function dwfl_module_return_value_location (#166118)
    - libebl: Backend improvements for several CPUs


author: Roland McGrath <roland@redhat.com> - 0.116-1
changelog:
  - update to 0.116
    - libdw fixes, API changes and additions
    - libdwfl fixes (#169672)
    - eu-strip/libelf fix to preserve setuid/setgid permission bits (#167745)


author: Roland McGrath <roland@redhat.com> - 0.115-2
changelog:
  - update to 0.115
    - New program eu-strings.
    - libdw: New function dwarf_getscopes_die.
    - libelf: speed-ups of non-mmap reading.
    - Implement --enable-gcov option for configure.


author: Roland McGrath <roland@redhat.com> - 0.114-1
changelog:
  - update to 0.114
    - new program eu-ranlib
    - libdw: new calls for inlines
    - libdwfl: new calls for offline modules


author: Roland McGrath <roland@redhat.com> - 0.113-2
changelog:
  - update to 0.113
    - elflint: relax a bit.  Allow version definitions for defined symbols
      against DSO versions also for symbols in nobits sections.
      Allow .rodata section to have STRINGS and MERGE flag set.
    - strip: add some more compatibility with binutils.
    - libdwfl: bug fixes.
  - Separate libdw et al into elfutils-libs subpackage.


author: Roland McGrath <roland@redhat.com> - 0.112-1
changelog:
  - update to 0.112
    - elfcmp: some more relaxation.
    - elflint: many more tests, especially regarding to symbol versioning.
    - libelf: Add elfXX_offscn and gelf_offscn.
    - libasm: asm_begin interface changes.
    - libebl: Add three new interfaces to directly access machine, class,
      and data encoding information.


author: Roland McGrath <roland@redhat.com> - 0.109-2
changelog:
  - update to 0.109
    - verify that libebl modules are from the same build
    - new eu-elflint checks on copy relocations
    - new program eu-elfcmp
    - new experimental libdwfl library


author: Roland McGrath <roland@redhat.com> - 0.108-1
changelog:
  - update to 0.108
    - merge strip fixes
    - sort records in dwarf_getsrclines, fix dwarf_getsrc_die searching
    - update elf.h from glibc


author: Roland McGrath <roland@redhat.com> - 0.107-1
changelog:
  - update to 0.107
    - readelf: improve DWARF output format
    - elflint: -d option to support checking separate debuginfo files
    - strip: fix ET_REL debuginfo files (#156341)


author: Jakub Jelinek <jakub@redhat.com> 0.92-1
changelog:
  - full version
  - macroized spec file for GPL or OSL builds
  - include only libelf under GPL plus wrapper scripts


author: Jakub Jelinek <jakub@redhat.com> 0.72-4
changelog:
  - fix arguments to gelf_getsymshndx and elf_getshstrndx
  - fix other warnings
  - reenable checks on s390x


author: Jeff Johnson <jbj@redhat.com> 0.69-4
changelog:
  - update to 0.69.
  - add "make check" and segfault avoidance patch.
  - elfutils-libelf needs to run ldconfig.


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 11.85-4
changelog:
  - Remove BuildRequires for pkgconfig - not needed
  - Clean out uneeded creation of site start directory
  - Remove /usr/share/doc/auctex directory from buildroot


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 11.84-4
changelog:
  - Add macros for automatic detection of Emacs version, site-lisp directory etc
  - Make building of tex-preview subpackage optional, and disable for now
  - Adjust Requires and BuildRequires for texlive
  - Remove auctex-init.el since not needed
  - Make RELEASE utf8


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 11.83-3
changelog:
  - Sync with FC-5 spec file which includes the following changes
  - No longer use makeinstall macro
  - No longer specify texmf-dir, tex-dir for configure
  - Main package now owns the site-lisp auctex and styles directories
  - Place preview.dvi in correct directory, and have tetex-preview own
    it
  - General cleanups


author: Jonathan Underwood <jonathan.underwood@gmail.com> - 11.82-4
changelog:
  - Added preview-latex
  - Removed INSTALL document from package (not necessary)
  - Clean up generation of startup files from spec file


author: Jan-Ake Larsson <jalar@imf.au.dk>
changelog:
  - Adjusted TeX-macro-global and put autoactivation in preinstall
    script so that it can be chosen at install time.


author: Karel Klic <kklic@redhat.com> 1:23.1-17
changelog:
  - Removed invalid URL for rpm-spec-mode.el. This mode in
    this version is no longer found on the Internet


author: Karel Klic <kklic@redhat.com> 1:23.1-16
changelog:
  - Removed PreReq from spec file
  - Fixed rhbz#517272 - emacs-23.1 update shows fonts in double the normal size


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1:23.1-10
changelog:
  - Update macros.xemacs to treat epoch correctly and be consistent with xemacs package
  - Use site_start_d macro consistently


author: Daniel Novotny <dnovotny@redhat.com> 1:23.0.93-5
changelog:
  - revoked default.el change (#508033)
  - added build dependency: librsvg2-devel (#507852)
  - added dependency: aspell (#443549)


author: Jens Petersen <petersen@redhat.com> - 1:23.0.93-3
changelog:
  - drop igrep since lgrep and rgrep are maintained in emacs now
  - specify the list of *-init.el files to be install explicitly


author: Daniel Novotny <dnovotny@redhat.com> 1:22.3-5
changelog:
  - fix #474578 - /usr/bin/emacs link not updated on upgrade
    (added a script to scan the alternatives and update them)


author: Jens Petersen <petersen@redhat.com> - 1:22.3-1
changelog:
  - update to 22.3 (#461448)
  - emacs-22.1.50-sparc64.patch and emacs-22.1.50-regex.patch no longer needed
  - update rpm-spec-mode.el to look for fields at bol (#466407)


author: Chip Coldwell <coldwell@redhat.com> 22.2-1
changelog:
  - revert back to emacs-22.2 (bz443639)
  - update to php-mode-1.4.0
  - update to rpm-spec-mode.el v0.12.1x (bz432209)
  - patch rpm-spec-mode to use compilation mode (bz227418)
  - fix the Release tag (bz440624)
  - drop superfluous configure options
  - move the new icons into the right destination directory
  - the heuristics for detecting address space randomization in the emacs dumper
    seem insufficient, so bring back setarch -R


author: Chip Coldwell <coldwell@redhat.com> 23.0.60-2
changelog:
  - New upstream tarball (fixes bz435767)
  - configure tweaks
  - drop files.el patch (now upstream)
  - drop parallel build patch (now upstream)


author: Chip Coldwell <coldwell@redhat.com> - 22.1-5
changelog:
  - require xorg-x11-fonts-ISO8859-1-100dpi instead of 75dpi (Resolves: bz281861)
  - drop broken python mode (Resolves: bz262801)


author: Chip Coldwell <coldwell@redhat.com> - 22.1-4
changelog:
  - fix pkgconfig path (from pkg-config to pkgconfig (Jonathan Underwood)
  - use macro instead of variable style for buildroot.


author: Chip Coldwell <coldwell@redhat.com> - 22.1-2
changelog:
  - add pkgconfig file for emacs-common and virtual provides (Resolves: bz242176)
  - glibc-open-macro.patch to deal with glibc turning "open" into a macro.
  - leave emacs info pages in default section (Resolves: bz199008)


author: Chip Coldwell <coldwell@redhat.com> - 22.1-1
changelog:
  - move alternatives install to posttrans scriptlet (Resolves: bz239745)
  - new release tarball from FSF (Resolves: bz245303)
  - new php-mode 1.2.0


author: Chip Coldwell <coldwell@redhat.com> - 22.0.990-2
changelog:
  - revert all spec file changes since 22.0.95-1 (Resolves: bz239745)
  - new pretest tarball from FSF (Resolves: bz238234)
  - restore php-mode (Resolves: bz235941)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.990-1
changelog:
  - new pretest tarball from FSF
  - removed Ulrich Drepper's patch to prevent mmapped pages during dumping
    removed BuildRequires: glibc >= 2.5.90-22
    (bug traced to glibc Resolves: bz239344)
  - fix alternatives removal scriptlet (Resolves: bz239745)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.99-4
changelog:
  - format of freed blocks changed between glibc 2.5.90-21 and 2.5.90-22
  - BuildRequires: glibc >= 2.5.90-22 (Ulrich Drepper)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.99-1
changelog:
  - new (last?) pretest tarball from FSF
  - update to php-mode-1.2.0 (Ville Skyttä Resolves: bz235941)
  - use /etc/alternatives instead of wrapper script


author: Chip Coldwell <coldwell@redhat.com> - 22.0.93-4
changelog:
  - fixup loaddefs.el dependencies (Dan Nicolaescu #176171)
  - add BuildRequires: automake (changes to Makefile.in)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.93-1
changelog:
  - new pretest version
  - removed setarch since new dumper copes with execshield
  - clean up site initialization files (varions #176171)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.92-1
changelog:
  - new pretest version
  - removed almost all emacs 21 patches from emacs 22
  - clean up spec file,
  - many new BuildRequires (David Woodhouse #221250)


author: Jens Petersen <petersen@redhat.com> - 21.4-14
changelog:
  - bring back setarch for i386 with -R option in spec file and drop
    emacs-21-personality-linux32-101818.patch since it no longer seems
    sufficient with recent kernels (Sam Peterson, #174736)
  - buildrequire giflib-devel instead of libungif-devel


author: Jens Petersen <petersen@redhat.com>
changelog:
  - avoid backup for fix-x-vs-no-x-diffs.dpatch (Ian Collier, #183503)
  - remove the old ccmode info manual (#182084)


author: Jens Petersen <petersen@redhat.com> - 21.4-13
changelog:
  - buildrequire libXaw-devel for menus and scrollbar
  - pass -R to setarch to disable address randomization during dumping
    (Sam Peterson, #174736)
  - install cc-mode.info correctly (Sam Peterson, #182084)
  - fix sort-columns not to use deprecated non-posix sort key syntax
    with sort-columns-posix-key-182282.patch (Richard Ryniker, #182282)
  - use system-name function not variable when setting frame-title-format in
    /etc/skel/.emacs for XEmacs users hitting .emacs


author: Jens Petersen <petersen@redhat.com> - 21.4-12
changelog:
  - add mule-cmd.el-X11-locale.alias-173781.patch to correct location of X11
    locale.alias file (Paul Dickson, #173781)
  - fix autoload of php-mode in php-mode-init.el (Christopher Beland, #179484)


author: Jens Petersen <petersen@redhat.com> - 21.4-11
changelog:
  - avoid building with -fstack-protector on i386 to prevent crashing
    (Jonathan Kamens, #174730)
  - require xorg-x11-fonts-ISO8859-1-75dpi instead of xorg-x11-fonts-75dpi
    for modular X (#174614)


author: Jens Petersen <petersen@redhat.com> - 21.4-9
changelog:
  - fix keyboard-coding-system on console for utf-8 (Dawid Gajownik, #173855)
  - update etags to latest cvs (Hideki Iwamoto, #173023)
    - replace etags-14.21-17.11-diff.patch with etags-update-to-cvs.patch
  - update smtpmail.el to latest cvs version for better authentication support
    with smtpmail-cvs-update.patch (Alberto Brizio, #167804)


author: Jens Petersen <petersen@redhat.com>
changelog:
  - fix name of aspell-es dictionary (#147964)
    - update emacs-21.3-lisp-textmodes-ispell-languages.patch


author: Jens Petersen <petersen@redhat.com> - 21.4-7
changelog:
  - update rpm-spec-mode.el to cvs revision 1.17 (Ville Skyttä)
    - fixes expansion of %{?dist}
  - replace emacs-21.4-setarch_for_loadup-101818.patch with backport
    emacs-21-personality-linux32-101818.patch from cvs (Jan Djärv)
    which also turns off address randomization during dumping (Masatake Yamato)
    - no longer need to pass SETARCH to make on i386 (#160814)
  - move ownership of %{_datadir}/emacs/ and %{_datadir}/emacs/23.1/
    from emacs to emacs-el and emacs-leim subpackages
  - don't build tramp html and dvi documentation
  - drop src/config.in part of bzero-and-have-stdlib.dpatch to avoid
    compiler warnings


author: Jens Petersen <petersen@redhat.com> - 21.4-6
changelog:
  - merge in changes from emacs22.spec conditionally
    - define emacs21 rpm macro switch to control major version and use it
  - update tramp to 2.0.49


author: Jens Petersen <petersen@redhat.com>
changelog:
  - move setting of require-final-newline from default.el to a comment in default
    .emacs (Ralph Loader, 119141)


author: Jens Petersen <petersen@redhat.com> - 21.4-5
changelog:
  - update cc-mode to 5.30.9 stable release to address font-lock problems
    (126165,148977,150197,155292,158044)


author: Jens Petersen <petersen@redhat.com> - 21.4-4
changelog:
  - don't accidently exclude emacsclient from common package
    (Jonathan Kamens, #157808)
  - traditional Chinese desktop file translation (Wei-Lun Chao, #157287)


author: Jens Petersen <petersen@redhat.com> - 21.4-2
changelog:
  - update etags to 17.11 (idht4n@hotmail.com, 151390)
    - add etags-14.21-17.11-diff.patch
  - replace i386 setarch redefinitions of __make and makeinstall with
    emacs-21.4-setarch_for_loadup-101818.patch and setting SETARCH on i386
    (Jason Vas Dias, 101818)


author: Jens Petersen <petersen@redhat.com> - 21.4-1
changelog:
  - update to 21.4 movemail vulnerability release
    - no longer need movemail-CAN-2005-0100.patch
  - replace %{_bindir}/emacs alternatives with a wrapper script (Warren Togami)
    to prevent it from disappearing when upgrading (Michal Jaegermann, 154326)
    - suffix the X emacs binaries with -x and the no X binaries with -nox
    - the wrapper script %{_bindir}/emacs-%version runs emacs-x if installed or
      otherwise emacs-nox.  %{_bindir}/emacs is a symlink to the wrapper
  - make emacs and emacs-nox own the subdirs in %{_libexecdir}
  - add a bunch of fixes from debian's emacs21_21.4a-1 patch:
      battery-acpi-support.dpatch, bzero-and-have-stdlib.dpatch,
      coding-region-leak.dpatch, detect-coding-iso2022.dpatch,
      fix-batch-mode-signal-handling.dpatch, pcl-cvs-format.dpatch,
      python-completion-ignored-extensions.dpatch,
      remote-files-permissions.dpatch, save-buffer.dpatch, scroll-margin.dpatch,
      xfree86-4.3-modifiers.dpatch
    - add fix-x-vs-no-x-diffs.dpatch
      - define emacs_libexecdir
      - build both emacs and emacs-nox as %{version}.1 and move common DOC file
        to emacs-common
      - suffix version in fns-%{version}.1.el with -x and -nox respectively
  - add 100 to elisp patches


author: Jens Petersen <petersen@redhat.com> - 22.0.50-0.20050406
changelog:
  - update to snapshot of current cvs 
    - configure xim support off by default
    - bootstrap snapshot


author: Jens Petersen <petersen@redhat.com> - 21.3-27
changelog:
  - use alternatives to switch _bindir/emacs between emacs and emacs-nox
    (Henning Schmiedehausen, #151067)
    - remove emacs and emacs-nox from bindir
    - prereq alternatives for emacs and emacs-nox
    - add post and postun scripts to handle alternatives
  - buildrequire xorg-x11-devel instead of XFree86-devel
  - really include and apply emacs-21.3-latex-mode-hook-144083.patch
  - make emacs and emacs-nox own _datadir/emacs/version too


author: Jens Petersen <petersen@redhat.com> - 21.3-25
changelog:
  - add tramp-2.1.3 to site-lisp (David Woodhouse, 149703)
    - move removal of info dir to after its installation
    - add tramp-init.el to put tramp into load-path


author: Jens Petersen <petersen@redhat.com> - 21.3-24
changelog:
  - mark default.el as a noreplace config file (Pawel Salek, 149310)
  - only set keyboard-coding-system in xterms to fix problem with input
    Latin characters becoming prefixes and making emacs loop
    (Eddahbi Karim, 126007)
  - make emacs-el own its lisp directories
  - run latex-mode-hook in latex-mode (Martin Biely, 144083)
    - add emacs-21.3-latex-mode-hook-144083.patch


author: Jens Petersen <petersen@redhat.com> - 21.3-23
changelog:
  - install %{_bindir}/emacs-nox as a hardlink of the versioned binary
  - drop explicit lib requirements
  - use sed instead of perl to fix up filelists


author: Jens Petersen <petersen@redhat.com> - 21.3-22
changelog:
  - use prereq instead of contexts for common script requirements
    (Axel Thimm, 147791)
  - move emacs.png from common to main package


author: Jens Petersen <petersen@redhat.com> - 21.3-21
changelog:
  - fix CAN-2005-0100 movemail vulnerability with movemail-CAN-2005-0100.patch
    (Max Vozeler, 146701)


author: Jens Petersen <petersen@redhat.com> - 21.3-20
changelog:
  - workaround xorg-x11 modifier key problem with
    emacs-21.3-xterm-modifiers-137868.patch (Thomas Woerner, 137868)


author: Jens Petersen <petersen@redhat.com> - 21.3-19
changelog:
  - prefer XIM status under-the-window for now to stop xft httx from dying
    (125413): add emacs-xim-status-under-window-125413.patch
  - default diff to unified format in .emacs


author: Jens Petersen <petersen@redhat.com> - 21.3.50-0.20041111
changelog:
  - initial packaging of cvs emacs
    - leim and elisp manual now in main tarball
    - no leim subpackage anymore, so make common obsolete it
    - no longer need MuleUCS, nor rfc1345.el
    - buildrequire and use autoconf rather autoconf213
    - no longer need emacs-21.2-x86_64.patch,
      editfns.c-Fformat-multibyte-davej.patch
    - bring back game for now
    - TODO: some patches still need updating
    - fns.el no longer installed
    - remove /var/games for now
    - update filelist generation to single sweep
    - update info_files list


author: Jens Petersen <petersen@redhat.com> - 21.3-18
changelog:
  - show emacs again in the desktop menu (132567)
  - require fonts-xorg-75dpi to prevent empty boxes at startup due to missing
    fonts (Johannes Kaiser, 137060)


author: Jens Petersen <petersen@redhat.com> - 21.3-16
changelog:
  - do not setup frame-title-format in default.el, since it will override
    setting by users (Henrik Bakken, 134520)
  - emacs-el no longer requires emacs for the sake of -nox users
    (Lars Hupfeldt Nielsen, 134479)
  - condition calling of global-font-lock-mode in default .emacs
    in case xemacs should happen to load it


author: Jens Petersen <petersen@redhat.com> - 21.3-15
changelog:
  - cleanup and update .desktop file
  - make emacs not appear in the desktop menu (Seth Nickell,132567)
  - move the desktop file from -common to main package
  - go back to using just gctags for ctags
  - etags is now handled by alternatives (92256)
  - improve the default frame title by prefixing the buffer name
    (Christopher Beland, 128110)
  - fix the names of some European aspell languages with
    emacs-21.3-lisp-textmodes-ispell-languages.patch (David Jansen, 122618)
  - fixing running "libtool gdb program" in gud with
    emacs-21.3-gud-libtool-fix.patch (Dave Malcolm, 130955)


author: Jens Petersen <petersen@redhat.com> - 21.3-13
changelog:
  - unset focus-follows-mouse in default.el to make switching frames work for
    click-to-focus (Theodore Belding,114736)


author: Jens Petersen <petersen@redhat.com> - 21.3-12
changelog:
  - update php-mode to 1.1.0
  - add emacs-21.3-no-rpath.patch so that /usr/X11R6/lib is not rpath'ed
  - require /bin/ln for %post (Tim Waugh, 119817)
  - move prereq for dev and /sbin/install-info to emacs-common
  - leim no longer requires emacs
  - use source site-lisp dir in %prep to setup site files
  - define and use site_lisp for buildroot in %install
  - default ispell dictionary to "english" for CJK locale
  - add comment to top of site-start.el about load order
  - turn on auto-compression-mode in default.el (114808)
  - set require-final-newline with setq (David Olsson,119141)
    and remove redundant next-line-add-newlines setting
  - update info_file list (Reuben Thomas,114729)


author: Mike A. Harris <mharris@redhat.com> 21.3-11
changelog:
  - Removed bogus Requires: XFree86-libs that was added in 21.3-8, as rpm
    find-requires will automatically pick up the dependancies on any runtime
    libraries, and such hard coded requires is not X11 implementation
    agnostic (#118471)


author: Jens Petersen <petersen@redhat.com> - 21.3-9
changelog:
  - bring back emacs-nox subpackage (emacs built without X support) (#113001)
    [suggested by Frank Kruchio]
  - base emacs package now only contains emacs binary built with X support
    and no longer obsoletes emacs-nox
  - all the common files required by emacs and emacs-nox are now in emacs-common
  - update php-mode.el to 1.0.5
  - add missing rfc1345.el leim input method
  - update po-compat.el to version in gettext-0.13.1
  - update base package summary
  - add url for python-mode.el and php-mode.el
  - gctags is now a symlink to ctags.emacs


author: Jens Petersen <petersen@redhat.com> - 21.3-8
changelog:
  - comment out setting transient-mark-mode in skel .emacs (#102441,#90193)
    [reported by mal@gromco.com, Jonathan Kamens]
  - improve lang-coding-systems-init.el to set-language-environment for CJK
    utf-8 locale too and use utf-8 for default-coding-systems and
    terminal-coding-system (#111172) [Yoshinori Kuniga]
  - update rpm-spec-mode.el to newer one in xemacs package cvs (#105888) [Dams]
  - rename etags to etags.emacs and make etags a symlink to it at install time
    if it doesn't exist (#92256) [marc_soft@merlins.org]
  - apply editfns.c-Fformat-multibyte-davej.patch to fix multibyte code typo
    in Fformat [patch from Dave Jones]
  - add runtime requirements for XFree86-libs, image libraries, ncurses and zlib
  - improve -el and -leim package summaries
  - no longer configure build with redundant --with-gcc


author: Jens Petersen <petersen@redhat.com> - 21.3-7
changelog:
  - use "setarch i386" to build on ix86 (#101818) [reported by Michael Redinger]
  - use __make to %build and %install
  - set keyboard coding-system for utf-8 in lang-coding-systems-init.el (#106929)
    [reported with fix by Axel Thimm]
  - add source url for MuleUCS
  - update base package description (#103551) [reported by Tim Landscheidt]


author: Jens Petersen <petersen@redhat.com> - 21.3-5
changelog:
  - move transient-mark-mode and global-font-lock-mode setting from default.el
    back to dotemacs, so as not to surprise old users (#90193)
    [reported by jik@kamens.brookline.ma.us]
  - change require-final-newline to query (default.el)
  - don't make a backup when applying browse-url-htmlview-84262.patch (#90226)
    [reported by mitr@volny.cz]


author: Jens Petersen <petersen@redhat.com> - 21.3-3
changelog:
  - use Mule-UCS utf-8 coding-system for CJK subprocess IO
  - no need to set fontset anymore in CJK locale


author: Jens Petersen <petersen@redhat.com> - 21.3-2
changelog:
  - add Mule-UCS for CJK utf-8 support (suggested by Akira Tagoh)
    and use it by default in CJK UTF-8 locale
  - move emacs-asian startup files into new lang-coding-systems-init.el
  - utf-8 setup in site-start.el is no longer needed in Emacs 21.3
  - generate filelist for site-lisp automatically like base lisp and leim
  - don't setup aspell in site-start.el
  - rename dotemacs to dotemacs.el and move former contents to new default.el


author: Jens Petersen <petersen@redhat.com> - 21.3-1
changelog:
  - update to 21.3
  - no longer set compound-text-with-extensions in dotemacs, since it is now
    the default
  - emacs-21.2-pop.patch is no longer needed
  - update php-mode to 1.0.4


author: Jens Petersen <petersen@redhat.com> - 21.2-32
changelog:
  - set X copy'n'paste encoding to extended compound-text (#74100)
    by default in .emacs file [suggested by olonho@hotmail.com]
  - .emacs file cleanup (xemacs now has a separate init file)


author: Jens Petersen <petersen@redhat.com> - 21.2-31
changelog:
  - block input in allocate_vectorlike to prevent malloc hangs (#83600)
    [thanks to Jim Blandy]
  - set startup wmclass notify in desktop file


author: Jens Petersen <petersen@redhat.com> 21.2-29
changelog:
  - update to newer po-mode.el and po-compat.el from gettext-0.11.4
  - patch po-mode's po-replace-revision-date for when
    po-auto-replace-revision-date is nil (#71264)
  - update po-mode-init.el
  - examine LC_ALL before LC_CTYPE in site-start.el for utf-8 (#79535)
  - don't install etc/DOC files explicitly by hand
  - make sure all lisp .elc files are up to date
  - pass _smp_mflags to make
  - remove games that we shouldn't ship


author: Jens Petersen <petersen@redhat.com> 21.2-27
changelog:
  - look at LANG after LC_CTYPE when checking for UTF-8 locale encoding
    in site-start.el (#79535)
  - don't set desktop file config(noreplace)


author: Jens Petersen <petersen@redhat.com> 21.2-24
changelog:
  - rpm-spec-mode update fixes
    - patch in XEmacs compat functions rather than defining them with apel
      macros in init file (#78764)
    - autoload "rpm-spec-mode" not "rpm-spec-mode.el" in same file
  - let emacs base also own leim dir to avoid startup warning about missing dir
    when -el and -leim aren't installed (#78764)


author: Jens Petersen <petersen@redhat.com>
changelog:
  - use LC_CTYPE rather than LANG to determine default encoding (#78678)
    [reported by starback@stp.ling.uu.se]


author: Jens Petersen <petersen@redhat.com> 21.2-23
changelog:
  - set transient-mark-mode in dotemacs for Emacs not XEmacs (#75440)
  - update rpm-spec-mode.el to 0.12
    - define needed XEmacs compat functions in new rpm-spec-mode-init.el
  - tidy site-start.el
    - move python-mode setup to python-mode
  - don't build with sbin in path
  - use _libexecdir, _bindir and _sysconfdir
  - don't gzip info files explicitly
  - use tar's C and j options
  - generate lisp file-lists in single find sweeps over lisp and leim dirs
    - use -fprint and -fprintf
    - correct more dir ownerships


author: Jens Petersen <petersen@redhat.com> 21.2-20
changelog:
  - add support for x86_64 and merge in s390 support from cvs
  - add alloca defines to amdx86-64.h (from SuSE)


author: Jens Petersen <petersen@redhat.com> 21.2-19
changelog:
  - own our libexec dir (#73984)
  - only set transient-mark-mode in dotemacs for Emacs (#75440)
  - update to latest config.{guess,sub}
  - use _datadir macro


author: Trond Eivind Glomsrød <teg@redhat.com> 21.1-0.1
changelog:
  - 21.1
  - Build on IA64 again - the default config now handles it
  - Drop all old patches
  - Misc cleanups
  - Update the elisp manual to 21-2.7
  - Deprecate the emacs-nox and emacs-X11 subpackages. 
    Simplify build procedure to match. 
  - Update php-mode to 1.0.0


author: Trond Eivind Glomsrød <teg@redhat.com> 20.7-43
changelog:
  - Add php-mode 0.9.9
  - Add URL (#54603)
  - don't run autoconf/libtoolize during build - they're broken
  - don't build on IA64 until they are fixed


author: Trond Eivind Glomsrød <teg@redhat.com> 20.7-42
changelog:
  - Update python-mode to the version in the python 2.2a3
  - Include po-mode in emacs, instead of including in gettext


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Much cleaner site-start.d sourcing
  - Add more build dependencies
  - Add the emacs lisp reference info pages (RFE #44577)
  - Don't require tamago - just plug it in for Japanese support


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add /usr/share/emacs/locale.alias , which had gone AWOL
  - update rpm-spec-mode to 0.11a, fresh from the author
    (Stig Bjorlykke <stigb@tihlde.org>). The changes we made 
    are integrated.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - do locale.alias fix for emacs-nox only, as it somehow
    broke the subject line in gnus. Weird.
  - update to gnus 5.8.7


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add rpm-spec-mode after modifying (use Red Hat groups,
    from /usr/share/doc/rpm-version/GROUPS) and fixing
    colours(don't specify "yellow" on "bright") Also, 
    use gpg, not pgp.
  - use it (site-start.el)
  - add mwheel 
  - use it, in /etc/skel/.emacs


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add /usr/share/emacs/site-lisp/site-start.d
  - change site-start.el so files in the above directory
    are automatically run on startup
  - don't set the ispell name in site-start.el, use the
    above directory instead


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix icon name in the .desktop file
  - don't have site-start.el "noreplace"
  - load psgml-init (if present) in the default site-start.el
    to avoid psgml modifying the file


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - remove ctags.1 and etags.1 from the emacs etc directory
    (#18011)
  - fix the emacs-nox not to use the locale.alias in XFree86
    (#18548)... copy it into /usr/share/emacs and patch
    the startup files to use it. Argh.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - include python mode and change in site-start.el related to this
  - some changes to the default .emacs


author: Matt Wilson <msw@redhat.com>
changelog:
  - don't build with -O2 on alpha until we can track down the compiler
    bug that causes crashes in the garbage collector
  - removed all the nox Japanese packages


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - (from MSW) different compression on IA64 to avoid hangs
  - remove etags/ctags - use a separate package. Disable patch1


author: Matt Wilson <msw@redhat.com>
changelog:
  - edited japanese patch not to patch configure
  - fixed a missing escaped " in a wc string
  - merge japanese support to head of development


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Version 20.7
  - Add requirement for final newline to the default .emacs
  - redid the Xaw3d patch
  - checked all patches, discarded those we've upstreamed


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't apply the unexelf patch - use a new unexelf.c file
    from the 21 source tree (this will go into the 20.7 tree)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - let the build system handle gzipping man pages and stripping
  - added patch to increase keyboard buffer size


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - added a security patch from RUS-CERT, which fixes 
    bugs mentioned in "Advisory 200004-01: GNU Emacs 20"


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fix bug #2988
  - recompile patched .el files (suggested by Pavel.Janik@linux.cz)
  - prereq /sbin/install-info


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fix descriptions and summary
  - fix permissions for emacs niaries (what the hell does 1755 means for a
    binary?)
  - added missing, as per emacs Changelog, NCURSES_OSPEED_T compilation
    flag; without it emacs on Linux is making global 'ospeed' short which
    is not the same as 'speed_t' expected by libraries. (reported by Michal
    Jaegermann <michal@harddata.com>)


author: Paul Fisher <pnfisher@redhat.com>
changelog:
  - upgrade to 20.5a
  - remove python-mode, wheelmouse support, and auctex menu
  - import emacs.desktop with icon from GNOME


author: David S. Miller <davem@dm.cobaltmicro.com>
changelog:
  - fix signals when linked with glibc on non-Intel architectures
    NOTE: This patch is not needed with emacs >20.2


author: Michael Fulbright <msf@redhat.com>
changelog:
  - added multibyte support back into emacs 20.2
  - added wmconfig for X11 emacs
  - fixed some errant buildroot references


author: Michael Fulbright <msf@redhat.com>
changelog:
  - joy a new version of emacs! Of note - no lockdir any more.
  - use post/preun sections to handle numerous GNU info files


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Moved ctags to gctags to fit in the more powerful for C (but less
    general) exuberant ctags as the binary /usr/bin/ctags and the
    man page /usr/man/man1/ctags.1


author: Ivana Varekova <varekova@redhat.com> - 4.2.4-5
changelog:
  - fix #489069 (update of the package from nonsplit version
    causes the absence of gnuplot binary -
    fixed using posttrans instead of post)


author: Phil Knirsch <pknirsch@redhat.com> 4.0.0-9
changelog:
  - Fixed 64bit problem with x11 display (#167508)
  - Added missing file ownage of /usr/share/gnuplot (#169333)


author: Phil Knirsch <pknirsch@redhat.com> 4.0.0-8
changelog:
  - Fixed missing Requires: emacs for the gnuplot-emacs package
  - Added a gnuplot-init.el file for startup (#151122)


author: Bill Nottingham <notting@redhat.com> 3.7.3-1
changelog:
  - update to 3.7.3
  - don't bother patching it to do jpegs with gd instead of gifs,
    as we haven't been building it with gd support anyway


author: Neal Becker <ndbecker2@gmail.com> - 1.1.2-5
changelog:
  - Own directories bash_completion.d and zsh/site-functions
    https://bugzilla.redhat.com/show_bug.cgi?id=487015


author: Neal Becker <ndbecker2@gmail.com> - 1.0-12
changelog:
  - Remove xemacs pkg - this is moved to xemacs-extras
  - Own /usr/lib64/python2.6/site-packages/{mercurial,hgext} dirs


author: Neal Becker <ndbecker2@gmail.com> - 1.0-5
changelog:
  - Move hgk-related py files to hgk
  - Put mergetools.hgrc in /etc/mercurial/hgrc.d
  - Add hgk.rc and put in /etc/mercurial/hgrc.d


author: Jonathan Shapiro <shap@eros-os.com> - 0.9.4-2
changelog:
  - update to 0.9.4-2
  - install contrib directory
  - set up required path for hgk
  - install man5 man pages


author: Matthew Barnes <mbarnes@redhat.com> - 0:0.9.5.1a-1.fc8
changelog:
  - Update to 0.9.5.1a
  - Remove Pyrex-0.9.4-fix-indent.patch (fixed upstream).
  - Remove pyrex-python-2.5.patch (fixed upstream).


author: John (J5) Palmieri <johnp@redhat.com> - 0.9.3.1-2
changelog:
  - Remove lib64 hack since this is a noarch package  
  - use python_sitelib script for determining where to install to


author: Jeremy Katz <katzj@redhat.com> - 0.9.3-0
changelog:
  - update to 0.9.3
  - add patch to fix generated code to build with gcc4
  - require python-abi and python-devel instead of conflicting with 
    newer python-devel


author: John (J5) Palmieri <johnp@redhat.com> - 0:0.9-3
changelog:
  - Added Pyrex-0.9-split-base-types.patch which fixes 
    long unsigned int bug showing up in dbus python binding
    builds for the x86_64 arch
  - Added regex hack to spec to work around a bug in python's
    distutils which would install files into /usr/lib instead of
    /usr/lib64 on 64 bit archs


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 0:0.9-0.fdr.3
changelog:
  - My mistake: rpm automatically removes %ghost files, no need to script
    it manually.
  - python distutils --record=FILE option doesn't record directories so include
    the site-packages/[directories] manually


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 0:0.9-0.fdr.2
changelog:
  - Merge changes from Michel Alexandre Salim <salimma[AT]users.sf.net>
    + Require build system's python version because directories are named
      pythonX.Y
    + Create *.pyo files and %ghost them (Privleged user with python optimize
      turned on may generate them, but they aren't needed for operation.
    + Do not include the Mac Pyrex compiler stuff
    + Change license to Public Domain
  - Script to remove any %ghost files on package removal
  - Patch around an incompatible change between python 2.2 and python 2.3's
    definition of LONG_LONG being renamed to PY_LONG_LONG


author: Marc Maurer <uwog@abisource.com> 1:1.4.2-1
changelog:
  - New upstream release
  - Add voikko support in an enchant-voikko package
  - Bump glib-devel BR to 2.6.0


author: Caolan McNamara <caolanm@redhat.com> 1:1.3.0-3.fc9
changelog:
  - Resolves: rhbz#426402 use system hunspell not internal one and 
    split out aspell backend.
  - See: rhbz#430354 hspell backend disabled until pic issue fixed


author: Michael Schwendt <mschwendt[AT]users.sf.net> 1:1.1.6-3
changelog:
  - make in %build
  - disable bad buildroot rpaths in libs, don't use %makeinstall
  - require %{epoch} of main package in -devel package (Fridrich Strba)


author: Michael Schwendt <mschwendt[AT]users.sf.net> 1:1.1.6-2
changelog:
  - add dep glib2-devel for pkgconfig in -devel package
  - include %{_libdir}/enchant dir in main package
  - make -devel package require exact VR of main package
  - use -p /sbin/ldconfig in scriptlets


author: Rui Miguel Seabra <rms@1407.org>
changelog:
  - update spec to current stat of affairs
  - building from source rpm is now aware of --with and --without flags:
  - --without aspell --without ispell --without myspell --with uspell


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 1.0.2
  - remove --copy-generic-name-to-name because there's no GenericName
    anymore
  - include libexecdir stuff


author: Matthias Saou <http://freshrpms.net/> 3.0.1-1
changelog:
  - Update to 3.0.1.
  - Update nohashbang patch.
  - Include new apirst2html script, but remove .py extension to avoid .pyc/pyo.
  - Include egg-info file.


author: Matthias Saou <http://freshrpms.net/> 2.1-8
changelog:
  - Remove desktop file prefix and X-Fedora category.
  - Include patch to remove #! python from files only meant to be included.


author: Matthias Saou <http://freshrpms.net/> 2.1-7
changelog:
  - Rebuild against python 2.5.
  - Remove no longer needed explicit python-abi requirement.
  - Change python build requirement to python-devel, as it's needed now.


author: Ville Skyttä <ville.skytta at iki.fi> - 2.1-3
changelog:
  - Change to noarch.
  - Get Python site-packages dir from distutils, should fix x86_64 build.
  - Require python-abi and tkinter.
  - %ghost'ify *.pyo.
  - Fix man page permissions.
  - Add menu entry for epydocgui.


author: Matthias Clasen <mclasen@redhat.com> - 1:0.2.39-1
changelog:
  - Update to 0.2.39
  - Drop upstreamed patches
  - Temporarily disable doc build due to xml catalog issues


author: - Bastien Nocera <bnocera@redhat.com> - 1:0.2.38-6
changelog:
  - Kill the main esound package, so people don't try to use it instead of
    pulseaudio itself (#353051)


author: - Lennart Poettering <lpoetter@redhat.com> - 1:0.2.38-3
changelog:
  - Move ESD socket from /tmp/.esd/socket to /tmp/.esd-`id -u`/socket to allow
    multiple concurrent esd instances, one per user (#251505)
  - Fix build with newer libc


author: - Bastien Nocera <bnocera@redhat.com> - 1:0.2.38-2
changelog:
  - Patch from Martin Stransky <stransky@redhat.com> to work around
    a race condition in snd_pcm_drain (#238680)


author: Matthias Clasen <mclasen@redhat.com> - 1:0.2.36-4
changelog:
  - Split a -libs package off the core esound package
    in preparation for pulseaudio  (#223503) 
  - Correct the License tag


author: Warren Togami <wtogami@redhat.com> 1:0.2.34-2
changelog:
  - remove INSTALL and 536k of useless .ps and html
  - move man pages from -devel to main pkg
  - #117037 BR alsa-lib-devel
  - #107781 remove old (2002) stripping disabling stuff (TEST ME!)
  - other cleanups


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Use %{_tmppath}
  - Add BuildRequires
  - Don't strip explicitly
  - Make the esound-devel depend on esound with version
  - s/Copyright/License/
  - it isn't relocatable, don't pretend it is
  - make /etc/esd.conf noreplace


author: Francois Aucamp <faucamp@fedoraproject.org> - 1.40.02-1
changelog:
  - Update to version 1.40.02
  - Added patch to compile with GCC and not to link to libstdc++ (not needed)
  - Added manpage (thanks goes to Luke Yelavich from Ubuntu for writing it)


author: Francois Aucamp <faucamp@fedoraproject.org> - 1.31-3
changelog:
  - Added "makefile_libjack" patch to link to libjack
  - Added BuildRequires: jack-audio-connection-kit-devel


author: Francois Aucamp <faucamp@fedoraproject.org> - 1.31-2
changelog:
  - Removed espeakedit (and associated patches and BuildRequires) from package
    until all phoneme table compilation functions can be moved into espeak (or a
    separate commandline app without wxGTK dependencies)
  - Voices are still compiled from source, but using pre-compiled phoneme table
    from upstream until the above issue is resolved


author: Francois Aucamp <faucamp@fedoraproject.org> - 1.31-1
changelog:
  - Update to version 1.31
  - Compile phoneme tables and voice dictionaries from source instead of
    packaging pre-compiled binary data
  - Added espeakedit as Source1
  - Added BuildRequires: wxGTK-devel for espeakedit
  - Added "makefile_rpmoptflags_wxversion" espeakedit patch to enable
    RPM_OPT_FLAGS and set the correct wxWidgets version
  - Added "espeak_data_path" espeakedit patch to be able to set control the
    source directory that espeakedit's compiler uses


author: Francois Aucamp <faucamp@csir.co.za> - 1.28-1
changelog:
  - Update to version 1.28
  - Added "synthdata_strlen" patch to fix memory allocation issue on x86_64 (RHBZ #252712)
  - Modified %prep to build against portaudio v19 for F8 and later
  - Upstream license changed from GPLv2+ to GPLv3+


author: Francois Aucamp <faucamp@csir.co.za> - 1.19-1
changelog:
  - Update to version 1.19
  - Removed "espeak-1.18-makefile_lpthread" patch as it has been included upstream
  - Removed "espeak-1.18-makefile_smp" patch as it has been included upstream
  - Removed "espeak-1.18-ptr_64bit" patch as it has been solved upstream
  - Fixed espeak-data file permissions


author: Francois Aucamp <faucamp@csir.co.za> - 1.18-2
changelog:
  - Created "espeak-1.18-ptr_64bit" patch to allow compilation on x86_64 (fixes 64-bit pointer issues)
  - Created "espeak-1.18-makefile_smp" patch to allow parallel make ("_smp_mflags")
  - Renamed "makefile_lpthread" patch to "espeak-1.18-makefile_lpthread"


author: Francois Aucamp <faucamp@csir.co.za> - 1.18-1
changelog:
  - Update to version 1.18
  - Dropped statically-linked "speak" executable (replaced by dynamically-linked "espeak" executable)
  - Removed the "espeak program name" patch as it has been included upstream
  - Removed "espeak program name" patch backup file cleanup from %install
  - Minor modification to "makefile lpthread" patch to account for new lib/executable
  - Removed "BIN_NAME" variable from make in %build (implemented upstream)


author: Francois Aucamp <faucamp@csir.co.za> - 1.17-1
changelog:
  - Update to version 1.17
  - Removed "makefile install target" patch as it has been included upstream
  - Removed "AMD64 sizeof(char *)" patch as it has been included upstream
  - Minor modification to "espeak program name" patch to allow patching current version


author: Francois Aucamp <faucamp@csir.co.za> - 1.16-4
changelog:
  - Modified patch steps to create backups with different suffixes
  - Renamed patch file extensions to .patch
  - Added step in %install to remove patch backup files in documentation


author: Francois Aucamp <faucamp@csir.co.za> - 1.16-3
changelog:
  - Fixed source file permissions for -debuginfo package in %prep
  - Added RPM_OPT_FLAGS to "make" command in %build; removed RPM_OPT_FLAGS makefile patch
  - Modified makefile install target patch to include general support for setting compiler optimization flags via CXXFLAGS
  - Removed creation of .orig backup files during patching
  - Modified patch files to have different suffixes


author: Francois Aucamp <faucamp@csir.co.za> - 1.16-2
changelog:
  - Added "install" target to makefile (makefile_install_target.patch)
  - Added patch to fix AMD64 sizeof(char *) assumption bug (upstream request ID 1588938)
  - Changed "portaudio" BuildRequires to "portaudio-devel"
  - Added patch to makefile to allow RPM_OPT_FLAGS
  - Added patch to replace all references to "speak" binary with "espeak"
  - Moved header files to /usr/include/espeak
  - Added rmdir command to "install" to remove empty soundicons directory


author: Marek Kasik <mkasik@redhat.com> - 2.28.2-2
changelog:
  - Don't use RPATH
  - Remove static libs
  - Remove unused patches
  - Fix mixed use of spaces and tabs in spec file
  - Avoid expansion of some macros in changelog
  - Related: #543948


author: Marek Kasik <mkasik@redhat.com> - 2.28.1-5
changelog:
  - Add backported patch evince-aspect-ratio.patch (#531430).
  - Preserve aspect ratio of scaled pages and set page orientation
  - automatically (gnome bugs #599468 and #599470)


author: Marek Kasik <mkasik@redhat.com> - 2.28.1-1
changelog:
  - Update to 2.28.1
  - Add evince-pdf-print-revert.patch (reverts upstream's change
  - of print which revealed the bug #517310)


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2.27.1-2
changelog:
  - Include /usr/include/evince directory (#483306).
  - Don't run /sbin/ldconfig in post scriptlet (no shared libs in that pkg).
  - Let -libs post/postun run /sbin/ldconfig directly.


author: Matthias Clasen <mclasen@redhat.com> - 2.20.1-5
changelog:
  - Fix a problem in the tiff patch
  - Turn off the dvi backend for now, since the tetex kpathsea 
    gives linker errors on x86_64


author: Kristian Høgsberg <krh@redhat.com> 0.5.3-1
changelog:
  - Bump poppler_version to 0.5.2.
  - Package icons and add %post and %postun script to update icon cache.


author: Kristian Høgsberg <krh@redhat.com> 0.5.0-2
changelog:
  - Spec file update from Brian Pepple <bdpepple@ameritech.net> (#123527):
    - Drop Requires for gtk2 & poppler, devel soname pulls these in.
    - Disable GConf schema install in install section.
    - Add BR for gnome-doc-utils, nautilus & libXt-devel.
    - Use smp_mflags.
    - Drop BR for desktop-file-utils,gcc & gcc-c++.
    - Add URL & full source.
    - Use more macros.
    - Fix ownership of some directories.
    - Drop depreciated prereq, and use requires.
    - Use fedora extras preferred buildroot.
    - Various formatting changes.


author: Kristian Høgsberg <krh@redhat.com> 0.3.4-1
changelog:
  - New upstream version again.
  - Add nautilus property page .so's.
  - Stop scrollkeeper from doing what it does.


author: Milan Crha <mcrha@redhat.com> - 2.27.5-1.fc12
changelog:
  - Update to 2.27.5
  - Remove pst import plugin patch (fixed upstream).
  - Remove work around deprecation of g_mount_unmount (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.27.3-5.fc11
changelog:
  - Add an evolution-pst subpackage for the PST importer plugin.
  - Disabled until libpst settles on an API.


author: Matthew Barnes <mbarnes@redhat.com> - 2.27.3-4.fc12
changelog:
  - Add BR for libpst-devel and libytnef-devel (RH bug #493049).
  - Add patch to build pst-import plugin against current libpst.
  - libpst's API broke again so disable the BR's for now.
  - Specify the gettext package when calling intltool-update.


author: Matthew Barnes <mbarnes@redhat.com> - 2.27.2-1.fc12
changelog:
  - Update to 2.27.2
  - Patch broken libevolution-mail-shared library.
  - Remove strict_build_settings since the settings are used upstream now.


author: Matthew Barnes <mbarnes@redhat.com> - 2.27.1-1.fc12
changelog:
  - Update to 2.27.1
  - Bump evo_major to 2.28.
  - Temporarily disable EDS_DISABLE_DEPRECATED due to GNOME bug #569652.


author: Matthew Barnes <mbarnes@redhat.com> - 2.25.90-2.fc11
changelog:
  - Update BuildRoot, License, Source and URL tags.
  - Require gnome-common so we don't have to patch it out.


author: Matthew Barnes <mbarnes@redhat.com> - 2.25.5-1.fc11
changelog:
  - Update to 2.25.5
  - Ditch eds_version and use our own version.  This will keep evolution
    and evolution-data-server versions in lockstep from now on.


author: Matthew Barnes <mbarnes@redhat.com> - 2.25.3.1-1.fc11
changelog:
  - Update to 2.25.3.1
  - New BR: libgweather-devel
  - Remove patch for GNOME bug #552583 (fixed upstream).
  - Bump the gtkhtml and gtk2 minimum versions.


author: Matthew Barnes <mbarnes@redhat.com> - 2.24.0-2.fc10
changelog:
  - Strip unneeded translations from .mo files (RH bug #463887).
  - Split Perl-based utilities into a "perl" subpackage (RH bug #462345).


author: Matthew Barnes <mbarnes@redhat.com> - 2.23.2-1.fc10
changelog:
  - Update to 2.23.2
  - Remove enchant-devel requirement.
  - Remove patch for RH bug #437208 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.23.1-1.fc10
changelog:
  - Update to 2.23.1
  - Bump evo_major to 2.22.
  - Bump eds_version to 2.23.1.
  - Bump glib2_version to 2.16.0.
  - Bump gtkhtml_version to 3.19.1.
  - Add gvfs requirement.
  - Drop gnomevfs2 requirement.
  - Remove patch for RH bug #164957 (obsolete).


author: Matthew Barnes <mbarnes@redhat.com> - 2.22.0-3.fc9
changelog:
  - Explicit require evolution-data-server since its shared object names
    still can't be trusted (RH bug #426511).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.91-1.fc9
changelog:
  - Update to 2.21.91
  - Bump eds_version to 2.21.91.
  - Remove patch for GNOME bug #240073 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.90-4.fc9
changelog:
  - Remove some obsolete configure options:
    --enable-file-chooser, --enable-file-locking, --enable-dot-locking
  - Remove gnome-doc-utils work-around for GNOME bug #427939 (fixed upstream).
  - Remove patch for RH bug #215478 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.90-1.fc9
changelog:
  - Update to 2.21.90
  - Update build requirements.
  - Remove patch for GNOME #363695 (obsolete/problematic).
  - Remove patch for GNOME #509741 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.5-1.fc9
changelog:
  - Update to 2.21.5
  - The backup-restore plugin is stable again.
  - Remove patch for RH bug #154360 (fixed upstream).
  - Remove patch for RH bug #166231 (obsolete, possibly fixed upstream).
  - Remove patch for RH bug #178295 (fixed upstream).
  - Remove patch for GNOME bug #362638 (fixed upstream).
  - Remove patch for GNOME bug #504030 (fixed upstream).
  - Remove patch for GNOME bug #507311 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.4-2.fc9
changelog:
  - Add patch for GNOME bug #507311 (send Bug Buddy reports to the new
    BugBuddyBugs Bugzilla component).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.3-4.fc9
changelog:
  - Split junk filtering plugins into evolution-bogofilter and
    evolution-spamassassin subpackages, each of which requires the
    necessary backend packages.  (RH bug #377381)


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.3-1.fc9
changelog:
  - Update to 2.21.3
  - Remove patch for RH bug #215467 (fixed upstream).
  - Remove patch for GNOME bug #499920 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.1-2.fc9
changelog:
  - Attempt to split the gnome-pilot stuff into a separate
    evolution-conduits subpackage (RH bug #178155).


author: Matthew Barnes <mbarnes@redhat.com> - 2.21.1-1.fc9
changelog:
  - Update to 2.21.1
  - Remove redundant requirements.
  - Bump EDS requirement to 2.21.1.
  - Bump gtkhtml requirement to 3.17.1.
  - Backup/restore plugin got moved from standard to experimental.
  - Revert the per-component menu items (RH bug #222105, #241462, #293771).
  - Show the switcher buttons by default (RH bug #186403).
  - Alter the desktop file Name and Comment.
  - Disable patch for GNOME bug #376991 for now.  It may be contributing
    to password prompting problems as described in RH bug #296671.
  - Remove patch for GNOME bug #417999 (fixed upstream).
  - Remove patch for GNOME bug #476040 (fixed upstream).
  - Remove patch for GNOME bug #477045 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.11.91-3.fc8
changelog:
  - Revise patch for GNOME bug #362638 to fix GNOME bug #357175
    (Evolution fails to close after IMAP alert has been displayed).


author: Milan Crha <mcrha@redhat.com> - 2.11.91-1.fc8
changelog:
  - Update to 2.11.91
  - Removed patch for RH bug #157400 / GNOME bug #303877 (fixed upstream).
  - Removed patch for RH bug #157505 / GNOME bug #303878 (fixed upstream).
  - Removed patch for RH bug #161885 / GNOME bug #309166 (fixed upstream).
  - Removed patch for RH bug #202751 / GNOME bug #355766 (fixed upstream).
  - Removed patch for RH bug #218898 / GNOME bug #385414 (fixed upstream).
  - Removed patch for RH bug #253348 / GNOME bug #467883 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.11.90-3.fc8
changelog:
  - Revise patch for GNOME bug #417999 to fix GNOME bug #447591
    (Automatic Contacts combo boxes don't work).


author: Matthew Barnes <mbarnes@redhat.com> - 2.11.3-1.fc8
changelog:
  - Update to 2.11.3
  - Evolution no longer has versioned file names.
  - Remove patch for RH bug #202289 (fixed upstream).
  - Remove patch for RH bug #235878 (fixed upstream).
  - Remove patch for RH bug #238155 (fixed upstream).
  - Remove patch for RH bug #240147 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.11.2-1.fc8
changelog:
  - Update to 2.11.2
  - Bump evo_major to 2.12.
  - Bump eds_version to 1.11.0.
  - Update files with new plugins and icons.
  - Remove patch for RH bug #190359 (fixed upstream).
  - Remove patch for RH bug #218801 (fixed upstream).
  - Remove patch for RH bug #234315 (fixed upstream).
  - Remove patch for RH bug #236399 (fixed upstream).
  - Remove patch for RH bug #236860 (fixed upstream).
  - Remove patch for RH bug #238551 (fixed upstream).
  - Remove patch for GNOME bug #373837 (fixed upstream).
  - Remove patch for GNOME bug #373116 (fixed upstream).
  - Remove patch for GNOME bug #418971 (fixed upstream).
  - Remove patch for GNOME bug #419469 (fixed upstream).
  - Remove patch for GNOME bug #419524 (fixed upstream).
  - Remove evolution-2.6.0-prototypes.patch (obsolete).


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.1-17.fc7
changelog:
  - Revise patch for GNOME bug #362638 to fix RH bug #237206
    (certificate prompt causes crash, again).


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.1-9.fc7
changelog:
  - Revise some patches so that we don't have to run autoreconf.
  - Remove patch for GNOME bug #427939 (use a different work-around).


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.1-2.fc7
changelog:
  - Revise patch for GNOME bug #362638 to fix RH bug #235096
    (crash when displaying a mail server message to user).


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.1-1.fc7
changelog:
  - Update to 2.10.1
  - Fix buggy gnome-doc-utils.make (GNOME bug #427939).
  - Remove patch for CVE-2007-1002 (fixed upstream).
  - Remove patch for RH bug #231767 (fixed upstream).
  - Remove patch for RH bug #235056 (fixed upstream).
  - Remove patch for GNOME bug #352713 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.0-9.fc7
changelog:
  - Require libxml2-devel in evolution-devel package (RH bug #235056).
  - Add libxml-2.0 requirement to evolution-plugin-2.10.pc.


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.0-8.fc7
changelog:
  - Revise patch for GNOME bug #419524 to fix RH bug #235082
    (crash in initial account setup wizard).


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.0-5.fc7
changelog:
  - CVE-2007-1002 (Shared memo categories format string vulnerability)
  - Add -Wdeclaration-after-statement to strict build settings.


author: Matthew Barnes <mbarnes@redhat.com> - 2.10.0-3.fc7
changelog:
  - Add flag to disable deprecated Camel symbols.
  - Add patch for GNOME bug #419469 (refactor shell/main.c).
  - Add patch for GNOME bug #419524 (use GLib's i18n macros).
  - Add patch for GNOME bug #418971 (drop support for GLib < 2.8).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.92-1.fc7
changelog:
  - Update to 2.9.92.
  - Require gtkhtml3 >= 3.13.92.
  - Add missing libgnomeprintui22 requirements.
  - Remove patch for GNOME bug #350253 (fixed upstream).
  - Remove patch for GNOME bug #356177 (fixed upstream).
  - Remove patch for GNOME bug #360946 (fixed upstream).
  - Remove evolution-2.5.4-move-autosave-file.patch (fixed upstream).
  - Add minimum version to intltool requirement (currently >= 0.35.5).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.91-1.fc7
changelog:
  - Update to 2.9.91
  - Require gtkhtml3 >= 3.13.6.
  - Add files for new imap-features plugin.
  - Add flag to disable deprecated Pango symbols.
  - Remove patch for GNOME bug #357216 (fixed upstream).
  - Remove patch for GNOME bug #359979 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.5-4.fc7
changelog:
  - Compile with the -fno-strict-aliasing flag, which will hopefully improve
    reliability until the illegal type-punning is fixed (RH bug #224552).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.5-3.fc7
changelog:
  - Revise evolution-2.7.1-no-gnome-common.patch so that we no longer
    have to run autoconf before building.
  - Revise evolution-2.5.4-fix-conduit-dir.patch so that we no longer
    have to run automake before building.


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.5-1.fc7
changelog:
  - Update to 2.9.5
  - Remove pilot-link-0.12 patch (fixed upstream).
  - Remove patch for RH bug #215466 and #218589 (fixed upstream).
  - Remove patch for RH bug #215695 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.4-1.fc7
changelog:
  - Update to 2.9.4
  - Bump eds_version to 1.9.4 due to soname changes.
  - Remove patch for GNOME bug #382431 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.3-1.fc7
changelog:
  - Update to 2.9.3
  - Configure with scrollkeeper disabled.
  - Disable automake portability checking.
  - Ship our own icons from gnome-icon-theme.
  - BuildRequires: gnome-doc-utils >= 0.8.0
  - Add patch for RH bug #215478 (Maildir and MH accounts).
  - Add patch for RH bug #215695 (crashes w/o mail accounts).
  - Add patch for RH bug #216537 (viewing attachments).
  - Add patch for RH bug #218801 (count unread messages first).
  - Add patch for GNOME bug #350253 (ship our own icons).
  - Add patch for GNOME bug #382431 (implicit function declaration).
  - Revise patch for GNOME bug #360946 (improved "about" dialog).
  - Remove patch for GNOME bug #357970 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.2-3.fc7
changelog:
  - Add patch to port evolution conduits to pilot-link 0.12.
  - Add patch for RH bug #215466 (optional meeting participants).
  - Add patch for GNOME bug #373837 (use GtkFontButton).
  - Remove patch for GNOME bug #343331 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.2-1.fc7
changelog:
  - Update to 2.9.2
  - Remove patch for Gnome.org bug #360240 (fixed upstream).
  - Remove patch for Gnome.org bug #360619 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.1-3.fc7
changelog:
  - Add patch for RH bug #176400 (reset calendar IM context).
  - Add patch for RH bug #182247 (calendar input glitch).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.1-2.fc7
changelog:
  - Add patch for Gnome.org bug #356177 (deprecate EMutex).
  - Add patch for Gnome.org bug #363695 (deprecate EStrv/EPoolv).
  - Disable patch for RH bug #202751 (unwanted side-effects).


author: Matthew Barnes <mbarnes@redhat.com> - 2.9.1-1.fc7
changelog:
  - Update to 2.9.1
  - Bump eds_version to 1.9.1, evo_major to 2.10.
  - Remove patch for Gnome.org bug #359236 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.8.1-1.fc7
changelog:
  - Update to 2.8.1
  - Use stricter build settings.
  - Make .desktop symlinks absolute (RH bug #209322).
  - Add patch for RH bug #202751 (printing of indic languages).
  - Add patch for Gnome.org bug #357970 (deprecated GLib / GDK symbols).
  - Add patch for Gnome.org bug #359236 (search state crash).
  - Add patch for Gnome.org bug #360240 ("unused variable" warnings).
  - Add patch for Gnome.org bug #360619 ("incompatible pointer type" warnings).
  - Add patch for Gnome.org bug #360946 (improved "about" dialog).
  - Add patch for Gnome.org bug #362638 (deprecate EThread).
  - Update patch for RH bug #211058 (partially fixed upstream).
  - Remove patch for RH bug #201307 (fixed upstream).
  - Remove patch for RH bug #205576 (fixed upstream).
  - Remove patch for Gnome.org bug #351332 (fixed upstream).
  - Remove patch for Gnome.org bug #352450 (fixed upstream).
  - Remove patch for Gnome.org bug #353472 (fixed upstream).
  - Remove patch for Gnome.org bug #356811 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.8.0-1.fc6
changelog:
  - Update to 2.8.0
  - Remove patch for RH bug #197868 (fixed upstream).
  - Remove patch for RH bug #201541 (fixed upstream).
  - Remove patch for RH bug #201831 (fixed upstream).
  - Remove patch for RH bug #202383 (fixed upstream).
  - Remove patch for RH bug #203036 (fixed upstream).
  - Remove patch for Gnome.org bug #352248 (fixed upstream).
  - Remove patch for Gnome.org bug #352423 (fixed upstream).
  - Update patch for Gnome.org bug #351332 (partially fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.92-3.fc6
changelog:
  - Replace my patch for RH bug #202383 with a better one from upstream.
  - Add patch for Gnome.org bug #352423.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.92-1.fc6
changelog:
  - Update to 2.7.92
  - Remove patch for RH bug #197834 (fixed upstream).
  - Update patch for Gnome.org bug #351332 (partially fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.91-1
changelog:
  - Update to 2.7.91
  - Update patch for RH bug #197834 for use with bug-buddy 2.15.90.
  - Require bug-buddy >= 2.15.90.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.4-5
changelog:
  - Remove patch for RH bug #167157, as it fixed it the wrong way.
  - The real fix for #167157 is in evolution-data-server-1.7.4-5.
  - No longer packaging unused patches.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.4-3
changelog:
  - Clean up spec file, renumber patches.
  - Add BuildRequires for dbus-glib-devel.
  - Rebuild to pick up new D-Bus.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.4-1
changelog:
  - Update to 2.7.4
  - Remove evo-calendar-print-with-pango-7.patch (fixed upstream).
  - Remove patch for Gnome.org bug #345677 (fixed upstream).
  - Remove patch for RH bug #175596 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> 2.7.2.1-3
changelog:
  - Port evolution-2.7.1-notification-cleanups.patch to new libnotify API.
  - Require libnotify >= 0.4.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.2.1-2
changelog:
  - Require specific versions of GNU Autotools packages for building.
  - Add evolution-2.7.2-preedit-gnome.bz-264485.patch (Mayank Jain).
  - Various spec file cleanups.
  - Pick up new libnotify.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.2.1-1
changelog:
  - Update to 2.7.2.1
  - Remove nss/nspr hunk from evolution-2.7.1-no-gnome-common.patch
    (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.1-1
changelog:
  - Update to 2.7.1
  - Bump evo_major from 2.6 to 2.8
  - Upstream evolution.desktop renamed evolution-2.28.desktop.
  - Upstream evolution.keys renamed evolution-2.28.keys.
  - Upstream evolution.mime renamed evolution-2.28.mime.
  - Update line numbers in evolution-2.5.2-no-gnome-common.patch and
    evolution-2.5.5.1-notification-cleanups.patch and rename them to
    version 2.7.1.


author: Caolan McNamara <caolanm@redhat.com> - 2.6.0-2
changelog:
  - rebuild against reverted pilot-link
  - disable evolution-2.5.4-fix-conduits.patch for reversion to pilot-link 0.11.8


author: David Malcolm <dmalcolm@redhat.com> - 2.5.91-1
changelog:
  - 2.5.91
  - updated patch 101 to track upstream changes to calendar printing code
  - remove uptreamed patch 807 (NM multiple initialization assertion)
  - readded the mail-to-task plugin XML UI file
  - bump e-d-s req to 1.5.91


author: David Malcolm <dmalcolm@redhat.com> - 2.5.90-1
changelog:
  - 2.5.90
  - trimmed patches 805 and 808, as parts of these got merged upstream
  - trimmed and regenerated patch 806 to track upstream
  - removed the mail-to-task plugin XML UI file


author: David Malcolm <dmalcolm@redhat.com> - 2.5.5.1-1
changelog:
  - 2.5.5.1
  - update patch 106 to track upstream, renaming from 
    evolution-2.2.2-commit-enter-on-calendar.patch to 
    evolution-2.5.5.1-commit-enter-on-calendar.patch
  - update patch 805 to track upstream
  - added patch to fix some newly missing declarations (patch 808)
  - replace evolution-2.5.4-port-to-new-libnotify-api.patch with 
    evolution-2.5.5.1-notification-cleanups.patch, since much of this was 
    duplicated by another patch that landed upstream; removing the actions code 
    as it was crashing deep inside DBus (patch 806, #177666)
  - explicitly list various files to reduce reliance on globbing; organized the
    files into logical groups; comment them
  - added -Wno-sign-compare to CFLAGS
  - enabled parallel make
  - introduced require_function_declarations macro to make 
    -Werror-implicit-function-declaration flag optional; turn it off for now
  - include the new CalDAV and mail-attachments-import plugins in the file list;
    add an XML UI file for the mail-to-task plugin. 
  - use "sed -i -e" rather than "sed -ie" to avoid getting severe bonobo files


author: David Malcolm <dmalcolm@redhat.com> - 2.5.4-4
changelog:
  - ported alarm notification code to the new libnotify API (patch 806, #177546)
  - added libnotify_support macro
  - added explicit notify-daemon requirement as a workaround for bug #177535


author: David Malcolm <dmalcolm@redhat.com> - 2.5.4-3
changelog:
  - updated patch 800 to include patch for memo conduit (untested at this stage);
    renaming from evolution-2.5.2-fix-conduits.patch to 
    evolution-2.5.4-fix-conduits.patch; extended patch 802 to handle the memo 
    conduit; renaming from evolution-2.2.2-fix-conduit-dir.patch to 
    evolution-2.5.4-fix-conduit-dir.patch; re-enable conduits in build (#175160)
  - switch the build-time dep for the audio-inline plugin from gstreamer-devel to
    gstreamer08-devel to better reflect the test in the tarball's configure.in


author: David Malcolm <dmalcolm@redhat.com> - 2.5.4-2
changelog:
  - added optional build-time requirement on NetworkManager-glib-devel
  - update patch 805 to cover a missing declaration in Network Manager support


author: David Malcolm <dmalcolm@redhat.com> - 2.5.4-1
changelog:
  - 2.5.4
  - update patch 107 to track underlying code changes; rename from
    evolution-2.2.2-move-autosave-file.patch to
    evolution-2.5.4-move-autosave-file.patch
  - added patch to fix more missing declarations (patch 805)
  - added files for publish-calendar plugin


author: David Malcolm <dmalcolm@redhat.com> - 2.5.3-1
changelog:
  - 2.5.3
  - Updated patch 106 (evolution-2.2.2-commit-enter-on-calendar.patch) so that it
    still applies cleanly


author: Christopher Aillon <caillon@redhat.com> 2.5.2-2
changelog:
  - Require nspr and nss instead of mozilla-nspr and mozilla-nss
  - Update no-gnome-common patch to work with standalone nss package


author: David Malcolm <dmalcolm@redhat.com> - 2.5.2-1
changelog:
  - 2.5.2
  - bump gtkhtml requirement from 3.7.6 to 3.9.2
  - bump eds requirement from 1.4.1.1 to 1.5.2
  - bump evo_major from 2.4 to 2.6
  - updated patch 107
  - updated patch 108
  - updated patch 800, replacing 
    rh-161817-attach-116019-conduit_pilot_link_updates.diff with 
    evolution-2.5.2-fix-conduits.patch.  Not yet complete.
  - disable pilot support for now (see #175160)
  - added hula plugin to list of packaged plugins
  - generalize gconf schema packaging to support changing evo_major


author: David Malcolm <dmalcolm@redhat.com> - 2.4.2-2
changelog:
  - force regeneration of the intltool files to prevent a problem where the 
    tarball copy of intltool-merge.in was out of sync with the intltool.m4 in the
    latest shipped copy of intltool, which resulted in a broken intltool-merge 
    script when the tree was reautotooled.  (appears that the tarball was built 
    with a CVS copy of intltool where @EXPANDED_LIBDIR@ had been renamed to
    @INTLTOOL_LIBDIR@, but our aclocal/intltool.m4 doesn't yet reflect that 
    change)


author: David Malcolm <dmalcolm@redhat.com> - 2.4.2-1
changelog:
  - 2.4.2
  - explicitly list the plugins that are packaged (#166234)
  - added build-time requirement on gstreamer-devel to cope with audio-inline
    plugin


author: David Malcolm <dmalcolm@redhat.com> - 2.4.1-7
changelog:
  - Added a patch (110) to hide the component switcher buttons by default on new
    windows (#170799) by patching the GConf schema.
  - Made list of installed schemas explicit.
  - Own the plugins subdirectory


author: David Malcolm <dmalcolm@redhat.com> - 2.4.1-6
changelog:
  - use 4 separate .desktop files from the redhat-menus package, rather than the
    current single one; bump the redhat-menus requirement accordingly (from 1.13
    to 5.0.4); introduce a macro for this requirement.


author: David Malcolm <dmalcolm@redhat.com> - 2.4.1-5
changelog:
  - fix removal of upstream .desktop file (broke on upgrade to Evolution 2.2, and
    continued to be broken with 2.3/2.4) (#103826, again)


author: David Malcolm <dmalcolm@redhat.com> - 2.4.1-3
changelog:
  - added patch (804: evolution-2.4.1-fix-missing-declarations.patch) to fix
    missing declaration (thanks to Peter Robinson)


author: David Malcolm <dmalcolm@redhat.com> - 2.4.1-1
changelog:
  - 2.4.1
  - regenerate patch 101 to handle conflict in 
    calendar/gui.print.c: print_week_day_event introduced by fix to upstream bug
    244981 (end date added while printing in the week view); bump patch name from
    version 5 to version 6
  - removed patch 804 (conduits-multi-day-crash); this is now in upstream tarball


author: David Malcolm <dmalcolm@redhat.com> - 2.4.0-1
changelog:
  - 2.4.0
  - Removed patch to fix implicit function declarations (patch 110, added in 
    2.3.8-1) as this is now upstream.


author: David Malcolm <dmalcolm@redhat.com> - 2.3.8-2
changelog:
  - Move -Werror-implicit-function-declaration from configuration to the make
    stage, to avoid breaking configuration tests.


author: David Malcolm <dmalcolm@redhat.com> - 2.3.8-1
changelog:
  - 2.3.8
  - add -Werror-implicit-function-declaration to CFLAGS and a patch to fix the 
    problems arising (patch 110)


author: David Malcolm <dmalcolm@redhat.com> - 2.3.7-3
changelog:
  - Introduce macro for gnome-pilot dependency, bumping from 2.0.6 to 2.0.13
  - Add obsoletion of libgal2/libgal2-devel (dependency was removed in 2.3.6-1);
    based on the last EVR of the libgal2 package in CVS, 2:2.5.3-2


author: David Malcolm <dmalcolm@redhat.com> - 2.3.7-1
changelog:
  - 2.3.7
  - Bump evolution-data-server requirement from 1.3.6 to 1.3.7
  - Bump gtkhtml3 requirement from 3.6.2 to 3.7.6


author: David Malcolm <dmalcolm@redhat.com> - 2.3.6.1-4
changelog:
  - Added patch to show correct mimetype for OpenOffice.org files when guessing 
    type for attachments with mimetype "application/octet-stream" (#164957)


author: David Malcolm <dmalcolm@redhat.com> 2.3.6.1-2
changelog:
  - Fixed version numbers in GConf schema files (#164622); added 
    apps-evolution-mail-prompts-checkdefault-2.4.schemas


author: David Malcolm <dmalcolm@redhat.com> - 2.3.6-1
changelog:
  - 2.3.6
  - Bump evolution-data-server requirement to 1.3.6 (needed for 
    CAL_STATIC_CAPABILITY_HAS_UNACCEPTED_MEETING)
  - Removed libgal2[-devel] dependencies; the code has been moved into the 
    evolution tarball


author: David Malcolm <dmalcolm@redhat.com> - 2.3.5.1-1
changelog:
  - 2.3.5.1
  - Update evo_major from 2.2 to 2.4
  - Updated evo-calendar-print-with-pango- patch from version 4 to 5
  - Removed Patch105: evolution-2.2.2-fix-new-mail-notify.patch as configure.in
    in this branch tests for existance for dbus-glib-1, rather than max-version.
  - Removed Patch801: gb-309138-attach-48417-fix-evo-conduit-memleaks.patch as
    this is now in upstream tarball.
  - Removed evolution-calendar-importers and evolution-addressbook-importers
    directories.
  - Updated evolution-2.2.2-no-gnome-common.patch to include a patch to rename
    mozilla-nspr to nspr


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-11.fc5
changelog:
  - Remove GNOME_COMPILE_WARNINGS from configure.in (since gnome-common might not be available when we rerun the autotools; patch 803)


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-10.fc5
changelog:
  - Moved .conduit files to libdir/gnome-pilot/conduits, rather than beneath datadir, to match gnome-pilot (patch 802)


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-9.fc5
changelog:
  - Replaced patch to port conduits to pilot-link-0.12 with Mark G Adams's version of same (#161817)
  - Added Mark G Adams's memory leak fix (patch 801)


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-4
changelog:
  - Removed explicit mozilla_build_version; instead use pkg-config to determine 
  the path to the NSS/NSPR headers.
  - Use a macro to express requirement on pilot-link (was 1:0.11.4, now 0.12; 
  patches depend on this)
  - Re-enabled the new-mail-notify plugin (my patch to handle differing DBus 
  versions is in the upstream tarball; but configure.in disables the plugin for 
  dbus versions > 0.23; patched configure.in to allow arbitrary DBus versions, 
  and run autoconf at the start of the build) (#156328)


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-1
changelog:
  - 2.2.2
  - updated evo-calendar-print-with-pango-4.patch to handle upstream change to print_comp_item
  - removed patch for XB73912; now in upstream tarball
  - removed patch to new-mail-notify; generalised fix to cope with various DBus API versions is now upstream
  - removed patch for XB73844; now in upstream tarball
  - Update requirements:
    - gtkhtml3 from 3.6.1 to 3.6.2
    - libgal2 from 2.4.1 to 2.4.2
    - eds from 1.2.1 to 1.2.2


author: David Malcolm <dmalcolm@redhat.com> - 2.2.1-1
changelog:
  - 2.2.1
  - Updated requirements:
    * gtkhtml3 from 3.6.0 to 3.6.1
    * libgal2 from 2.4.0 to 2.4.1
    * eds from 1.2.0 to 1.2.1
  - Added rum-time requirement on gnome-vfs2; updated version requirement from 2.0 to 2.4
  - The new-mail-notify plugin will not be built for now since the upstream configure test now checks for dbus-glib-1 version <= 0.23.4 (to minimise problems caused by the API change)


author: David Malcolm <dmalcolm@redhat.com> - 2.2.0-10
changelog:
  - disabled pilot-link support for now so that we have an evolution package; more patching is needed to get this to work with pilot-link-0.12


author: David Malcolm <dmalcolm@redhat.com> - 2.2.0-5
changelog:
  - Added patch for changes to DBus API in version 0.31 (#150671)
  - Removed explicit run-time spec-file requirement on mozilla.
    The Mozilla NSS API/ABI stabilised by version 1.7.3
    The libraries are always located in the libdir
    However, the headers are in /usr/include/mozilla-%{mozilla_build_version}
    and so they move each time the mozilla version changes.
    So we no longer have an explicit mozilla run-time requirement in the specfile; 
    a requirement on the appropriate NSS and NSPR .so files is automagically generated on build.
    We have an explicit, exact build-time version, so that we can find the headers (without
    invoking an RPM query from the spec file; to do so is considered bad practice)
  - Introduced mozilla_build_version, to replace mozilla_version


author: David Malcolm <dmalcolm@redhat.com> - 2.2.0-3
changelog:
  - added patch from upstream for bug XB-73192, fixing missing "Mark as Read/Unread" context menu items


author: David Malcolm <dmalcolm@redhat.com> - 2.2.0-1
changelog:
  - 2.2.0
  - Removed patch for GCC 4 fix as this is now in upstream tarball
  - Updated requirements:
    * gtkhtml3 from 3.5.7 to 3.6.0
    * libgal2 from 2.3.5 to 2.4.0
    * eds from 1.1.6 to 1.2.0


author: David Malcolm <dmalcolm@redhat.com> - 2.1.6-1
changelog:
  - Update from upstream unstable 2.1.6 to 2.1.6
  - Added patches to fix calendar and addressbook printing for non-Roman scripts (#138075)
  - Added explicit requirement on libgnomeprint22 >= 2.8.0
  - Added BuildRequires: gtk-doc
  - Updated requirements:
    * gtkhtml3 from 3.5.6 to 3.5.7
    * libgal2 from 2.3.4 to 2.3.5
    * eds from 1.1.5 to 1.1.6


author: David Malcolm <dmalcolm@redhat.com> - 2.1.5-1
changelog:
  - Update from upstream unstable 2.1.4 to 2.1.5
  - Updated requirements:
    * gtkhtml3 from 3.5.4 to 3.5.6
    * libgal2 from 2.3.3 to 2.3.4
    * eds from 1.1.4.1 to 1.1.5
  - Removed explicit packaging of weather icons as these are now below DATADIR/evolution/2.2 rather than DATADIR/evolution-2.2


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-1
changelog:
  - Update from upstream stable 2.0.3 to unstable 2.1.4
  - Updated evo_major from 2.0 to 2.2
  - Removed camel packaging as this has been moved to evolution-data-server for Evolution 2.2
  - Added plugins to the packaged files
  - Added weather icons to the packaged files
  - Updated requirements:
    * gtkhtml3 from 3.3.2 to 3.5.4
    * libgal2 from 2.2.4 to 2.3.3
    * eds from 1.0.3 to 1.1.4.1
    * libsoup from 2.2.0 to 2.2.2
  - Added built-time requirement on atk-devel
  - Enable all plugins for now
  - Added requirement on dbus (for the new-mail-notify plugin)
  - Enable gtk-doc
  - Updated GConf schema name suffixes from 2.0 to 2.2


author: David Malcolm <dmalcolm@redhat.com> - 2.0.3-1
changelog:
  - Update from upstream 2.0.2 to 2.0.3 with these bug fixes:
   * Addressbook
     XB67656 - almost the same email address are considrered identical (Siva)
     XB69079 - Data repeated after save with bad date format (Siva)
     XB66854 - Some strings are missed to translation (Rodney)

   * Calendar 	
     XB47529 - Date in reminder window appears in UTF-8 in non-UTF-8 locale (Rodney)
     XB68707 - Events ending at 12:00 AM show as ending at 12:00 pm (JP)
     XB67403 - wrong alarm time displayed (Rodrigo)
     XB68077 - appointment dialog re-size (Rodrigo)
     - leak fixes (Chen)
     - sensitize menu items in list view properly (JP)
     - redraw display when 24hr time setting changes (JP)

   * Mail
     XB69533 - Unable to subscribe to the alt hierarchy (Michael)
     XB69776 - Signed Mail with attachments displays everything with multipart/boundaries stuff (Michael)
     XB69615 - delete certificate after viewing smime message (Michael)
     XB69109 - EHLO or HELO with ip addresses does not conform rfc 821  (Michael)
     XB69982 - During Newsgroup list refresh, it crashes (Michael) 
     XB69446 - Mail shown as attachment if some headers are upper case (S. Caglar Onur) 
     XB68556 - NNTP with SSL won't work, even with stunnel (Michael) 
     XB69145 - toplevel message/rfc822 parts are broken for IMAP (Michael)
     XB69241 - base64 attachement holding PGP block (Jeff)
     XB67895 - nntp support not asking for password (Michael)
     XB67898 - Use of symbolic port-names is not guaranteed to work everywhere (Michael)
     XB69851 - remember password check doesn't stick (Michael)
     XB69623 - Moving a message from an IMAP INBOX to an IMAP folder caused crash (Radek)
     XB69339 - postscript and some other attachments not visable (Michael)
     XB69579 - vFoldersXBUNMATCHED generates errors (Michael)
     XB68958 - current message forgotten in vfolders (Michael)
     XB68974 - Wizard doesn't store smtp auth settings (Michael)
     XB67496 - html email not rendered in preview pane (Michael)
     XB67014 - Checking supported auth types doesn't work with new SSL certificate (Michael)
     XB68006 - Evo crashed after viewing previously-sent email and copying URL from it (Michael)
     XB68787 - Crash when migrating 1.4 data to 2.0.2 (Michael)
     XB67622 - SMTP auth usernames containing % character fail (Jeff)
     - fix pthread_key_delete args (Julio M. Merino Vidal)
  - Removed patch for "Unmatched" vfolder properties dialog (#141458) as this is now in upstream tarball (XB69579 above)
  - Update dependency on e-d-s from 1.0.2 to 1.0.3
  - Update dependency on libgal2 from 2.2.3 to 2.2.4


author: David Malcolm <dmalcolm@redhat.com> - 2.0.2-2
changelog:
  - Fix for #132050 (no entry for Evolution in the menus): use the new redhat-evolution.desktop file provided by redhat-menus-1.13


author: David Malcolm <dmalcolm@redhat.com> - 2.0.2-1
changelog:
  - Update from 2.0.1 to 2.0.2
  - Updated dependency on e-d-s from 1.0.1 to 1.0.2
  - Updated dependency on libgal2 from 2.2.2 to 2.2.3
  - Updated dependency on gtkhtml3 from 3.3.0 to 3.3.2
  - ppc's mozilla dependency is now in line with the other architectures at 1.7.3


author: David Malcolm <dmalcolm@redhat.com> - 2.0.1-3
changelog:
  - Fix for #135135, updating the fix for #103826 that removes the evolution.desktop file in "Office"; the file to delete had been renamed to evolution-2.0.desktop
  - Added requirement on redhat-menus, since this supplies the target of our .desktop symlink


author: David Malcolm <dmalcolm@redhat.com> - 2.0.1-2
changelog:
  - update mozilla dependency from 1.7.2 to 1.7.3, apart from on ppc (and on s390 and s390x, which remain at 1.6, and on ppc64 where it isn't available at all)


author: David Malcolm <dmalcolm@redhat.com> - 2.0.1-1
changelog:
  - Update from 2.0.0 to 2.0.1
  - Updated dependency on e-d-s from 1.0.0 to 1.0.1
  - Updated dependency on libgal2 from 2.2.0 to 2.2.2


author: David Malcolm <dmalcolm@redhat.com> - 2.0.0-1
changelog:
  - Update from 1.5.94.1 to 2.0.0
  - Change source FTP location from 1.5 to 2.0
  - Updated dependency on e-d-s from 0.0.99 to 1.0.0
  - Documentation has now moved from 1.5 to 2.0


author: David Malcolm <dmalcolm@redhat.com> - 1.5.94.1-1
changelog:
  - updated tarball from 1.5.93 to 1.5.94.1
  - the BASE_VERSION in the configure.in script has finally been updated from 1.5 to 2.0 (affects OAFIIDs, install dirs, binary names etc); updated evo_major and various other parts of the spec-file to reflect this; however documentation is still 1.5 in upstream tarball
  - updated dependency on libgal2 from 2:2.1.14 to 2:2.2.0
  - updated dependency on libsoup from 2.1.13 to 2.2.0
  - updated dependency on e-d-s from 0.0.98 to 0.0.99


author: David Malcolm <dmalcolm@redhat.com> - 1.5.93-2
changelog:
  - updated gnome-icon-theme requirement from 1.2.0 to 1.3.6 to fix problem with missing stock icons (bz #130142)


author: David Malcolm <dmalcolm@redhat.com> - 1.5.93-1
changelog:
  - updated tarball from 1.5.92.2 to 1.5.93
  - removed filechooser patch - this is now in the upstream tarball, with a test at configuration time; it was autodetected and enabled in my test build; I've explicitly enabled it to be certain.
  - updated dependency on libgal2 from 2:2.1.13 to 2:2.1.14
  - updated dependency on libsoup from 2.1.12 to 2.1.13
  - updated dependency on e-d-s from 0.0.97 to 0.0.98


author: David Malcolm <dmalcolm@redhat.com> - 1.5.92.1-1
changelog:
  - updated tarball from 1.5.91 to 1.5.92.1
  - added a dependency on gnome-icon-theme
  - updated dependency on libgal2 from 2:2.1.11 to 2:2.1.13
  - updated dependency on gtkhtml3 from 3.1.17 to 3.3.0
  - updated dependency on libsoup from 2.1.11 to 2.1.12
  - updated dependency on e-d-s from 0.0.95 to 0.0.97


author: Jeremy Katz <katzj@redhat.com> - 1.5.90-5
changelog:
  - use mozilla 1.7 on platforms where it's available
  - check to make sure the appropriate mozilla headers exist if using
    mozilla nss for ssl or fail the build


author: David Malcolm <dmalcolm@redhat.com> - 1.5.7-3
changelog:
  - Added GtkFileChooser patch based on work by Carlos Garnacho Parro (http://lists.ximian.com/archives/public/evolution-patches/2004-March/004867.html); added requirement for GTK 2.4


author: Jeremy Katz <katzj@redhat.com> 1.4.5-6
changelog:
  - Make imap command length shorter to avoid choking some imap servers 
    (notably cyrus-imap).
  - Make wombat session managed so that we don't hit weird bonobo activation
    things.  This adds a dependency on $DISPLAY for wombat.  (#106826)


author: Jeremy Katz <katzj@redhat.com> 1.4.5-5
changelog:
  - use AI_ADDRCONFIG to avoid returning IPv6 addresses on hosts without 
    IPv6 support
  - add patch from upstream with reply-to-list shortcut (Ctrl-l)


author: Jeremy Katz <katzj@redhat.com> 1.4.5-3
changelog:
  - Pull in some patches from upstream CVS
    * Avoid division by zero with POP (X#41610)
    * Don't mangle headers (X#33545)
    * Prefix IPV6 numeric hosts properly (X#46006, #105028)
    * Use proper function for IPV6 reverse lookups (X#46006)
    * Allow timezone offset to be up to 14 hours (X#49357)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - add patch from upstream CVS to fix SMTP syntax problems (#106630) 
  - really remove duplicate menu entry (#103826)


author: Jeremy Katz <katzj@redhat.com> 1.4.4-5
changelog:
  - patch from upstream to fix display of some mails in 
    different charsets (#102899)
  - add requires on newer version of ORBit2 (#103386)
  - add patch from upstream (extracted by George Karabin) to use gnome-vfs 
    mime icon lookup where available (#102553)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - update to 1.3
  - don't build with pilot support for now
  - don't redhat-ify the summary prefs for now


author: Jeremy Katz <katzj@redhat.com> 1.2.2-5
changelog:
  - security patches from upstream
    - sanity check UUEncoding header before decoding (CAN-2003-0128)
    - don't decode doubly UUEncoded content (CAN-2003-0129)
    - don't use a bonobo component to display things without registered 
      handlers (CAN-2003-0130)


author: Jeremy Katz <katzj@redhat.com> 1.2.2-3
changelog:
  - memleak patch had some bits that weren't supposed to be there.  update 
    to newer from upstream.
  - fix directory checking in proxy patch


author: Jeremy Katz <katzj@redhat.com> 1.2.2-2
changelog:
  - add missing build dep (#84388)
  - add patch from upstream for evolution-mail memleak
  - add patch from upstream to use the gnome2 proxy settings by default


author: Jeremy Katz <katzj@redhat.com> 1.2.0-6
changelog:
  - require a newer soup, the old one Has Bugs (tm)
  - excludearch x86_64; getting a R_X86_64_32S relocation in libical 
    although everything appears to be built with -fPIC correctly


author: Jeremy Katz <katzj@redhat.com> 1.2.0-4
changelog:
  - add upstream patch to handle LDAPv3 better
  - add upstream patch to fix shell memory leaks
  - add upstream patch to fix ldap scope selection
  - build with openssl instead of mozilla-nss since it's available on 
    more platforms
  - build on all arches


author: Jeremy Katz <katzj@redhat.com> 1.2.0-2
changelog:
  - macro-ify the mozilla version to make it easier to build against 
    newer mozillas with headers in new locations
  - buildrequire pilot-link-devel (#78077)
  - drop uneeded ldapv3 patch (toshok says 1.2 already handles this)
  - drop unneeded patch for ordering of the libdb checks
  - add fejj's patch to always subscribe to the inbox from evolution-patches


author: Jeremy Katz <katzj@redhat.com> 1.0.8-3
changelog:
  - remove static and libtool archives for importers and camel-providers (#68222)
  - do desktop-file-install magic 
  - remove dead sites from summary list (#64522)
  - support openldap protocol version 3 based off of Nalin's autofs changes


author: Jeremy Katz <katzj@redhat.com> 1.0.3-6
changelog:
  - add patch to fix spool unread counts (#64198)
  - build with the fix for the crasher mail sent to 
    evolution-list (ximian #24140)


author: Jeremy Katz <katzj@redhat.com> 1.0.3-4
changelog:
  - include fejj(at)ximian.com's patch to fix the EINPROGRESS error with ssl 
    since it's been committed to the branch and fixes the problem for me
  - include patch from tagoh(at)redhat.com to change the default charset 
    for Japanese to ISO-2022-JP (#63214)


author: Jeremy Katz <katzj@redhat.com> 1.0.3-3
changelog:
  - minor tweaks to the redhatify patch
  - make accepting appointments sent to mailing lists work
  - use the RFC specified LDAP attribs for freebusy and calendarURI 
    in addressbook
  - fix a crash in the startup wizard


author: Jeremy Katz <katzj@redhat.com> 1.0.2-3
changelog:
  - mozilla 0.9.9 has nspr and nss subpackages, hooray!  rip out the static 
    libnss linkage and just link against what is provided dynamically
  - kill the -devel subpackage since it's of questionable use
  - explicitly require mozilla-nss and mozilla-nspr packages to make it easier
    to resolve the requirements


author: Jeremy Katz <katzj@redhat.com> 1.0.1-1
changelog:
  - update to 1.0.1
  - patch for autoconf 2.52 accepted upstream
  - include man page
  - use --with-sub-version=" (%{version}-%{release})"


author: Jeremy Katz <katzj@redhat.com> 1.0-2
changelog:
  - really disable news
  - add patch from Jens Petersen <juhp@redhat.com> to hopefully get 
    builds working with autoconf 2.52
  - conditionalize static libnss stuff so that it can go away when we
    have a mozilla with shared libnss


author: Jeremy Katz <katzj@redhat.com> 1.0-1.7.2
changelog:
  - add patches off of branch for:
    * do not show up as Preview Release in version string
    * have next/previous work with multiple selected messages
  - build without pilot support


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - let's build with an included copy of libnss now since OpenSSL is support
    is disabled on the 1.0 branch
  - build with --enable-dot-locking=no
  - excludearch ia64 again now that we need libnspr


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - build with gnome-pilot and krb5 support
  - conditionalize ldap, pilot and krb5 support
  - clean up buildrequires some


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - we can build on ia64 since we're using openssl instead of nspr
  - disable non-functional nntp support 
  - 0.99.2 (rc2)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - add explicit requires on current bonobo, oaf, and GConf to help people
    help themselves
  - s/Copyright/License/


author: Milan Crha <mcrha@redhat.com> - 0.28.1-1
changelog:
  - Update to 0.28.1
  - Remove patch for Gnome bug #588453 (fixed upstream).
  - Remove patch for Gnome bug #595260 (fixed upstream).
  - Remove patch for Gnome bug #595355 (fixed upstream).
  - Remove patch for Gnome bug #595480 (fixed upstream).


author: Milan Crha <mcrha@redhat.com> - 0.28.0-1
changelog:
  - Update to 0.28.0
  - Add patch for Gnome bug #588453 (slow retrieval of message IDs).
  - Add patch for Gnome bug #595260 (crash in mapi_sync_deleted).
  - Add patch for Gnome bug #595355 (crash and incorrect header parsing).
  - Add patch for Gnome bug #595480 (crash on fetching GAL).


author: Milan Crha <mcrha@redhat.com> - 0.27.5-2
changelog:
  - Add new libebookbackendmapigal.so to a list of installed files.
  - Bump requirement of evolution and evolution-data-server to 2.27.5.


author: Matthew Barnes <mbarnes@redhat.com> - 0.27.3-2
changelog:
  - Remove ldconfig calls since all the libraries we install are
    dlopen'ed modules (RH bug #586991).


author: Rex Dieter <rexdieter[AT]users.sf.net> 0.9.1-3
changelog:
  - cleanup %description
  - set eXecute bit on installed lib.
  - no_rpath patch
  - deps patch (items get (re)compiled on *every* call to 'make')


author: Miloslav Trmac <mitr@redhat.com> - 5.43.0-7
changelog:
  - s/%{buildroot}/"$RPM_BUILD_ROOT"/g
  - s,/usr/share/man,%{_mandir},g
  - Use the Fedora-specified Buildroot:
  - Remove BuildRequires: libX11-devel
  - Don't install pkgIndex.tcl as an executable file
  - Drop the incorrect expect-5.32.2-fixcat.patch
  - Remove comments from *.h.in because they confuse config.status; this makes
    the workaround expect-5.43.0-cfg-setpgrp.patch unnecesary.


author: Miloslav Trmac <mitr@redhat.com> - 5.43.0-6
changelog:
  - Update to build with Tcl 8.5
  - Drop static libraries
  - Ship more documentation
  - Use %check for (make test), remove the conditional


author: Jens Petersen <petersen@redhat.com> - 5.43.0-2
changelog:
  - fix flushing of unbuffer script (Charles Sullivan, #143963)
    with unbuffer-child-flush-143963.patch (Don Libes)
  - make autoconf include parent dir in testsuite to avoid error
    (Robert Scheck, 150369)
  - separate the examples scripts patches from the rest


author: Jens Petersen <petersen@redhat.com>
changelog:
  - replace expect-5.32.2-setpgrp.patch by expect-5.43.0-cfg-setpgrp.patch
    to set SETPGRP_VOID correctly


author: Robert Scheck <redhat@linuxnetz.de>
changelog:
  - update to 5.43.0 (150369)
    - no longer need expect-5.39.0-64bit-82547.patch,
      expect-5.38.0-autopasswd-9917.patch
      and expect-5.42-mkpasswd-verbose-user-141454.patch
  - run aclocal and configure with current autoconf (116777)
    - buildrequire autoconf and automake instead of autoconf213


author: Jens Petersen <petersen@redhat.com> - 5.42.1-2
changelog:
  - fix "mkpasswd -v" failure when user not specified with
    expect-5.42-mkpasswd-verbose-user-141454.patch (J F Wheeler, 141454)


author: Jens Petersen <petersen@redhat.com> - 5.42.1-1
changelog:
  - update to 5.42.1 (Robert Scheck, 126536)
    - no longer need expect-5.32.2-kibitz.patch
    - update expect-5.38.0-autopasswd-9917.patch
  - drop explicit tcl and tk requires


author: Alan Cox <alan@redhat.com>
changelog:
  - Autopasswd doesnt work and isnt ever going to work with pam around
    since password setting depends on the modules in use (think "fingerprint"
    or "smartcard"..). Remove it.


author: Jens Petersen <petersen@redhat.com> - 5.39.0-95
changelog:
  - new package split out from tcltk
  - build against installed tcl and tk
  - filtered changelog for expect
  - buildrequire autoconf213 (#110583) [mvd@mylinux.com.ua]


author: Jens Petersen <petersen@redhat.com> - 8.3.5-93
changelog:
  - update expect to 5.39.0 (fixes #58317)
  - drop first hunk of 64bit patch and rename to expect-5.39.0-64bit-82547.patch
  - expect-5.32.2-weather.patch and expect-5.32.2-expectk.patch no longer needed


author: Jens Petersen <petersen@redhat.com> - 8.3.5-84
changelog:
  - drop synthetic lib provides
  - remove obsolete patches from srpm
  - update buildrequires
  - use buildroot instead of RPM_BUILD_ROOT
  - install all man pages under mandir, instead of moving some from /usr/man
  - introduce _genfilelist macro for clean single-sweep find filelist generation
    for each package
  - use perl to remove buildroot prefix from filelists


author: Jens Petersen <petersen@redhat.com> 8.3.5-76
changelog:
  - make it build on x86_64 (details below)
  - add 100 to expect patches
  - patch expect configure to get EXP_LIB_SPEC to use libdir
  - don't explicitly update config.{guess,sub} since %configure does it for us
  - added "--without check" rpmbuild option to disable running tests in future
  - generate filelists from datadir and not from mandir from now on


author: Jens Petersen <petersen@redhat.com>
changelog:
  - build without all makecfg patches for now
    - in particular use upstream versioned library name convention
  - add backward compatible lib symlinks for now
  - add unversioned symlinks for versioned bindir files
  - use make's -C option rather than jumping in and out of source dirs
    during install
  - use INSTALL_ROOT destdir-like make variable instead of makeinstall
    for all subpackages except tix and itcl


author: Jens Petersen <petersen@redhat.com>
changelog:
  - move expectk and expect-devel files out of expect into separate packages
    (#9832)
  - drop the crud compat dir symlinks in libdir
  - correct expect license
  - don't explicitly provide 64bit libs on ia64 and sparc64


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - quick hack to have a correct setpgrp() call in expect
  - fix config.guess and config.sub to newer versions


author: Adrian Havill <havill@redhat.com>
changelog:
  - re-enable glibc string and math inlines; recent gcc is a-ok.
  - optimize at -O2 instead of -O
  - rename "soname" patches related to makefile/autoconf changes


author: Adrian Havill <havill@redhat.com>
changelog:
  - used %makeinstall to brute force fix any remaining unflexible makefile dirs
  - improved randomness of expect's mkpasswd script via /dev/random (bug 9507)
  - revert --enable-threads, linux is (still) not ready (yet) (bug 49251)


author: Adrian Havill <havill@redhat.com>
changelog:
  - refresh all sources to latest stable (TODO: separate expect/expectk)
  - massage out some build stuff to patches (TODO: libtoolize hacked constants)
  - remove patches already rolled into the upstream
  - removed RPATH (bugs 45569, 46085, 46086), added SONAMEs to ELFs
  - changed shared object filenames to something less gross
  - reenable threads which seem to work now
  - fixed spawn/eof read problem with expect (bug 43310)
  - made compile-friendly for IA64


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - FHS packaging changes.
  - revert --enable-threads, linux is not ready (yet) (#11789).
  - expect: update to 5.31.7+ (#11595).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to (tcl,tk}-8.2.3, expect-5.31, and itcl-3.1.0, URL's as well.
  - use perl to drill out pre-pended RPM_BUILD_ROOT.
  - configure with --enable-threads (experimental).
  - autopasswd needs to handle password starting with hyphen (#9917).
  - handle 553 ftp status in rftp expect script (#7869).
  - remove cryptdir/decryptdir, as Linux has not crypt command (#6668).
  - correct hierarchy spelling (#7082).
  - fix "expect -d ...", format string had int printed as string (#7775).


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Make changes from bug number 7602
  - Apply patch from bug number 7537
  - Apply fix from bug number 7157
  - Add fixes from bug #7601 to the runtcl patch


author: Axel Thimm <Axel.Thimm@ATrpms.net> - 2.9-19
changelog:
  - Update to 2.9.
  - Removed fakechroot-2.8-initsocketlen.patch (upstream now).
  - Removed int->ssize_t readlink type change (upstream testing for type
    now).
  - Removed permission fix for scripts/ldd.fake scripts/restoremode.sh
    scripts/savemode.sh (fixed upstream).


author: Axel Thimm <Axel.Thimm@ATrpms.net> - 2.5-11
changelog:
  - Add %{_libdir}/fakechroot to %files.
  - Fix license (is LGPL, not GPL).
  - Add commented %check (currently broken).
  - Add ldd.fake and save/restoremode.sh to %doc


author: Lon Hohberger <lhh@redhat.com> 0.2.1-3
changelog:
  - Fix spec file due to qpid package renaming and architecture changes
  - Don't build on s390 and s390x
  - Resolves: rhbz#568003 rhbz#567744


author: Lon Hohberger <lhh@redhat.com> 0.2.1-2
changelog:
  - Fix man page location
  - Fix metadata output
  - Fix arguments to be more consistent with other fencing
    agents
  - Resolves: rhbz#561418 rhbz#563624 rhbz#563626


author: Lon Hohberger <lhh@redhat.com> 0.2-1
changelog:
  - Update to latest upstream version
  - Serial & VMChannel listener support
  - Static permission map support
  - Man pages
  - Init script
  - Various bugfixes


author: Matthias Clasen <mclasen@redhat.com> - 1.96-12
changelog:
  - Add Spanish voices from the guadalinex project, in the
    hispavoces-pal-diphone and hispavoces-sfl-diphone subpackages
    (#496011)


author: Jesse Keating <jkeating@redhat.com> - 1.96-11
changelog:
  - Drop the explicit dep on festival-voice, as it is redundant and
    causes problems with multiple providers


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.9
changelog:
  - fix the library link patch to use -lncurses instead of -ltinfo --
    the later is all that's really needed, but the former works on older
    distros too.


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.8
changelog:
  - festival-devel depends on the libraries package, not base festival. this
    raises an multilib question: need to obsolete festival.i386 on x86_64.
    Right now, there's no mechanism for doing that. Fortunately, all the
    changes in packaging happen to make it so that the current version doesn't
    conflict with the old release, so one will get unused cruft but not
    breakage when upgrading.
  - Bite teh proverbial bullet and make libFestival build shared.
  - update speech-tools soname patch to work in the more general case needed
    by the festival main build
  - make said shared-lib a subpackage to avoid multiarching the whole thing
  - split festival-devel and speechutils-devel in anticipation of future
    plan of actually decoupling these packages.
  - note that rpmlint complains about "missing" deps on the devel packages. it
    should be fixed to recognize requiring a -lib/libs package is sufficent or
    better.
  - add saytime script. Because, really, what else is this package *for*?
  - add the intro.text so (intro) works. 196 more bytes won't kill us. :)
  - remove $PATH from LD_LIBRARY_PATH used in build. (What the heck?)
  - add defattr to all subpackages. I don't think it's strictly necessary
    since putting it in the first package seems sufficient, but that's
    probably not behavior to count on.
  - make descriptions and summaries use more consistant language


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.7
changelog:
  - Upstream baseurl now includes version. (Thanks Alan Black @ cmu)
  - Update siteinit patch to also incorporate sitevars
  - Add sitevars as a config file
  - Ship our own siteinit and sitevars as sources
  - In default sitevars, reference /usr/local/share/festival/lib as another
    place to look for voices (it's okay if that doesn't exist). Hopefully,
    this will encourage people who want to install non-RPM-packaged voices to
    keep from doing it in /usr/share.
  - Fix wrong references to slt voice in other nitech voices
  - Fix wrongly commented-out (require 'f2bf0lr) in awb, clb, and rms voices.
  - Stop untarring source files and use the setup macro properly.
  - Get rid of silly DATA.TMP directories for installing voices and 
    dictionaries.
  - Stop making ../speechtools link. Currently solved by patching to look
    in the current directory; could also do this by moving everything up
    a directory.
  - TODO: festival-buildroot.patch could stand to be updated. May not
    even be needed anymore.
  - Drop the 8k versions of the diphone voices, since there's not really
    any point. If you want smaller, use one of the arctic_hts voices
    instead. And overall, this saves us about 4.5M.


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.6
changelog:
  - Fix copy-paste error in JMK description (thanks Matthias Clasen)
  - Remove "nitech-us-" from the names of those voice packages to make the
    package names shorter. (This will also be more convenient if we switch to
    the cmu versions in the future.)
  - made aliases so old cmu_us_*_arctic_hts voice names still work.
  - Look for /etc/festival/siteinit.scm (and move siteinit.scm there!)
  - Mark siteinit.scm as a config file
  - Remove some non-useful stuff from speech-tools-utils.
  - Move main dir from /usr/share/festival to /usr/share/festival/lib at
    request of upstream. Also, we can drop the FHS (well, "fsstnd" -- it's
    old) patch and just pass FTLIBDIR to make. Which, hey, we were already
    doing. Yay redundancy.
  - clean up CFLAGS and CXXFLAGS. "-fpermissive" was hiding bad stuff.
  - update speech tools with patch from AWB to fix 64-bit build issue 
    with EST_DProbDist
  - there's still some compiler warnings which should be addressed upstream.
  - The nitech hts voices don't properly proclaim_voice, making them not
    show up for gnome-speech and thus making orca crash. See details in the
    comments in bug #232105.


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.5
changelog:
  - use festvox- instead of festival-voice for voice packages -- matches
    upstream tarballs, and is shorter. Also, use shorter form of
    the date-based version.
  - get the README.htsvoice from the nitech voices -- it contains
    license info.
  - build (but don't enable by default) ESD support in speech-tools (bug
    - fix coding error noted in bug #162137 -- need to push this upstream.
  - link speech tools libraries with -lm, -ltermcap, -lesd and with themselves
    (bug #198190, partially)
  - holy sheesh. Use g++ for CXX, not gcc. Fixes bug #198190 completely.


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.4
changelog:
  - subpackages! Split out speech-tools, docs, voices.
  - long descriptions for the individual voices, carefully gathered from
    readmes and web sites.
  - ooh. replace cmu_hts voices with the updated versions from upstream
    <http://hts.sp.nitech.ac.jp/>. Two new voices, and updated versions of
    the others. (The voices packaged at festvox.org are apparently based on
    older versions of these, which in turn are from the CMU upstream.)
  - TODO: make aliases for the cmu voices.
  - arguably, voices should be made in to their own src.rpms. They don't need
    anything from here to build. That's for a future version. (At that time,
    the gigantic multisyn voices could be added.) The CMU dict needs festival
    installed to build, but I don't think it needs the source, so dicts could
    be subpackages too. And the docs are also a good candidate for separation.
    speech-tools, though, is incestuously used in the festival build process
    and I think it makes sense to keep that bundled.
  - TODO: check through the speechtools-utils for what should actually be 
    packaged; fix the include path for siod (and anything else that needs it).
  - TODO: package festival.el so it just works with emacs.
  - TODO: reinvent festival_server_control as a proper init script
  - TODO: put the festival server in sbin, maybe?
  - Another question: should we drop the 8k diphone voices? Any point?
  - Changed "X11-like" to "MIT-style" (which is what X11 is) to make rpmlint
    happy.
  - make 1.96 macro to deal with all of the changes to version
    in subpackages. Kludgy, but there's RPM for you.


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.3
changelog:
  - oh! The "etc-path" is important after all. Map that into
    /usr/lib[arch]/festival via a kludge.
  - make cmu_us_slt_arctic_hts the default voice, in preparation for
    splitting the voice packages. (thankfully, there's already a fallback
    mechanism -- cool!)


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.2
changelog:
  - clean up accidental backup file left in updated awb_arctic_hts 
    tarball
  - remove /usr/share/festival/etc (see bug #228315)
  - move unpackage voices to the prep section where it belongs
  - other minor spec file readability changes
  - "make install" for this package is, um, "interesting". It seems
    geared for local user-level builds. So, rather than doing that and
    then patching it up, do the right parts by hand as necessary. (The
    previous version of the spec file did a convoluted mix of both.)
  - don't install static libs.
  - took out the massive hack that munges EST_*.h to speech_tools/EST_*.h in
    the installed header files -- programs should instead use
    -I/usr/include/speech_tools, shouldn't they? Put this back if I'm wrong.
  - TODO -- autogenerated speech_tools docs
  - festvox_ellpc11k.tar.gz, the spanish voice, wasn't getting installed anyway
    due to a license question. Since it's also gone upstream, removing.


author: Matthew Miller <mattdm@mattdm.org> 1.96-0.1
changelog:
  - Preliminary update to 1.96
  - Update to new cmu_us_*_arctic files -- they're changed upstream,
    although they don't appear to be versioned. Awesome. The current
    versions are those found in the same directory with the 1.96 files.
  - ditto festlex_CMU.tar.gz
  - add macro for speechtoolsversion
  - minor update to festival-1.96-american.patch.
  - update shared build patch and rename to make more obvious that
    it applies to the speechtools portion of the package.
  - gcc 4 build patches now upstream.
  - localhost-connections patch now upstream.
  - note that festvox_ellpc11k.tar.gz and festvox_kallpc8k.tar.gz are no longer 
    in the directory tree upstream; drop?


author: Ray Strode <rstrode@redhat.com> - 1.95-5
changelog:
  - get gnopernicus working again. Patch from 
    Fernando Herrera <fherrera@gmail.com> (bug 178312)
  - add a lot of compiler flags and random cruft to get
    festival to build with gcc 4.1


author: <johnp@redhat.com> - 1.95-3
changelog:
  - require info packages so the post does not fail
  - remove /usr/bin/VCLocalRule from buildroot since it is
    an extranious file that does not need to be installed


author: Miloslav Trmac <mitr@redhat.com> - 1.95-2
changelog:
  - Fix build with gcc 4 (#156132)
  - Require /sbin/install-info for scriptlets (#155698)
  - Don't ship /usr/bin/VCLocalRules (#75645)


author: Matthew Miller <mattdm@mattdm.org> 1.95-0.mattdm8
changelog:
  - put speech-tools binaries in /usr/libexec/speech-tools so as to not
    clutter /usr/bin. Another approach would be to make speech-tools a 
    separate package and to make these utilities a subpackage of that.
  - macro-ize /usr/bin, /usr/lib, /usr/include


author: Matthew Miller <mattdm@mattdm.org> 1.95-0.mattdm6
changelog:
  - worked on this some more
  - made actually work -- put back rest of fsstnd patch which I had broken
  - made kludge for lack of sonames in shared libraries -- I think I did the
    right thing
  - put back american as the default -- british dicts are non-free.


author: Matthew Miller <mattdm@mattdm.org> 1.95-0.mattdm1
changelog:
  - preliminary update to 1.95 beta
  - add really nice CMU_ARCTIC HTS voices, which is the whole point of wanting
    to do this. (They have a free license.)
  - switch to festvox.org north american upstream urls
  - keep old doc files -- there's no new ones yet.
  - add comment to specfile about reason for lack of OALD (British) voices --
    they've got a more restrictive license.
  - change license to "X11-style", because that's how they describe it.
  - remove exclusivearch. I dunno if this builds on other archs, but I
    also don't know why it wouldn't.
  - fancier buildroot string, 'cause hey, why not.
  - more "datadir" macros
  - remove most of Patch0 (fsstnd) -- can be done by setting variables instead.
    there's some bits in speechtools still, though
  - update Patch3 (shared-build)
  - don't apply patches 20 and 21 -- no longer needed.
  - disable adding "FreeBSD" and "OpenBSD" to the dictionary for now. Probably
    a whole list of geek words should be added. Also, the patch was applied
    in an icky kludgy way.


author: Bill Nottingham <notting@redhat.com> 1.4.2-19
changelog:
  - clean up buildroot references (#75643, #77908, #102985)
  - remove some extraneous scripts
  - fix build with gcc-3.3


author: Jens Petersen <petersen@redhat.com> 1.4.2-14
changelog:
  - put info files in infodir
  - add post and postun script to install and uninstall info dir file entry
  - drop postscript and info files from docs


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 1.4.2
  - Lots of fixes to make it build, more needed
  - Cleanups
  - Update URL
  - Fix docs inclusion
  - Drop prefix
  - Use %{_tmppath}


author: Uri Lublin <uril@redhat.com> - 0.4.9-0.15.5spice.20080908
changelog:
  - Rename package and files from qffmpeg to ffmpeg-spice
  - Removed all 'q' prefix from directories/files/libraries.


author: Monty <cmontgom@redhat.com> - 0.4.9-0.13.20080908
changelog:
  - Correct versioning typo in spec
  - Remove unused codecs from build (allowing a stright configure to succeed)


author: Monty <cmontgom@redhat.com> - 0.4.9-0.11-20080908
changelog:
  - Update to a new git snapshot: 7ae0395709bda753ff1fb8cecdc2fc77232cab56
  - Revert SVN date-- this is not the date of the local repo, it is the date
    of the matching upstream ABI.  Do not change it.


author: Monty <cmontgom@redhat.com> - 0.4.9-0.5.20080908
changelog:
  - Move to a stripped-down form of 0.4.9 maintained locally
  - Remove more mpeg-related code
  - Move libav->libqav namespace change from specfile to to source build system


author: Warren Togami <wtogami@redhat.com> 2.6.2-2
changelog:
  - Upstream backports:
      97e003ed2bc2bafbb993693c9ae9c6d667731cc1 aim-buddy-status-grab
      37aa00d044431100d37466517568640cb082680c yahoo-buddy-idle-time
      40005b889ee276fbcd0a4e886a68d8a8cce45698 yahoo-status-change-away
      cb46b045aa6e927a3814d9053c2b1c0f08d6fa62 crash-validate-jid


author: Stu Tomlison <stu@nosnilmot.com> 2.5.8-2
changelog:
  - Backport patch from upstream to enable NSS to recognize root CA
    certificates that use MD2 & MD4 algorithms in their signature, as
    used by some MSN and XMPP servers


author: Warren Togami <wtogami@redhat.com> 2.5.2-6
changelog:
  - Automatically detect booleans to enable build features from dist tag
  - Unify RHEL4 and RHEL5 spec with Fedora to make both easier to maintain


author: Warren Togami <wtogami@redhat.com> 2.5.2-2
changelog:
  - Upstream backports:
    100: sametime-redirect-null crash
    101: NetworkManager-improvement
    102: no-password-in-dialog-if-not-remembering
    103: temporarily-remember-password-during-auto-reconnect
    104: smilie-theme-change-crash
    105: url_fetch_connect_cb-double-free crash
    106: GtkIMHtmlSmileys-remove-crash
    107: remove-dialog-from-open-dialog-list


author: Stu Tomlinson <stu@nosnilmot.com> 2.5.1-3
changelog:
  - Backport fixes from upstream:
    Add "Has You:" back to MSN tooltips
    Fix crash during removal of your own buddy icon
    Fix crash when handling self signed certificate with NSS SSL


author: Stu Tomlinson <stu@nosnilmot.com> 2.4.1-3
changelog:
  - Rebuild for new evolution-data-server
  - Clean up default prefs.xml
  - Enable nautilus integration plugin by default in prefs.xml (#242289)


author: Warren Togami <wtogami@redhat.com> - 2.2.0-2
changelog:
  - License clarification
  - Backport patches to fix memory leaks
  - Backport patches to fix proxy settings & status scores


author: Warren Togami <wtogami@redhat.com> - 2.1.0-2
changelog:
  - Upstream fix backports
    115: gmail-notification-crash #2323
    117: drag-and-drop-mouse-click-group-header #2333
    118: jabber-confirm-authentication-unencrypted-crash #2493


author: Stu Tomlinson <stu@nosnilmot.com> - 2.1.0-1
changelog:
  - 2.1.0
  - Only include translations in libpurple instead of duplicating them in
    packages that depend on libpurple anyway


author: Stu Tomlinson <stu@nosnilmot.com> - 2.0.1-4
changelog:
  - Fix purple-remote for AIM & ICQ accounts (#240589)
  - Add missing Requires to -devel packages
  - Add missing BuildRequires for libxml2-devel


author: Stu Tomlinson <stu@nosnilmot.com> - 2.0.0-1
changelog:
  - 2.0.0
  - Add scriptlets to install & uninstall GConf schemas
  - Move schema file from libpurple to Pidgin to avoid GConf
    dependencies in libpurple
  - rename gaim-fedora-prefs.xml to purple-fedora-prefs.xml


author: Stu Tomlinson <stu@nosnilmot.com>
changelog:
  - Update Gtk icon cache when installing or uninstalling (#238621)
  - Don't own all directories we put icons in


author: Warren Togami <wtogami@redhat.com> - 2.0.0-0.35.beta7devel
changelog:
  - upstream insists that we remove the Epoch
    rawhide users might need to use --oldpackage once to upgrade
  - remove mono and howl cruft


author: Stu Tomlinson <stu@nosnilmot.com> - 2:2.0.0-0.34.beta7devel
changelog:
  - Split into pidgin, finch & libpurple, along with corresponding -devel RPMs
  - Remove ldconfig for plugin directories
  - Fix non-UTF8 %changelog


author: Warren Togami <wtogami@redhat.com> - 2:2.0.0-0.33.beta7devel
changelog:
  - pidgin-2.0.0 snapshot prior to beta7
  - rename gaim to pidgin/purple/finch in various places of spec (not complete)
  - ExcludeArch s390, s390x.  It never did work there.
  - Include meanwhile plugin by moving to Extras


author: Warren Togami <wtogami@redhat.com> - 2:2.0.0-0.31.beta6
changelog:
  - Removed debian-02_gnthistory-in-gtk
    Removed debian-03_gconf-gstreamer.patch
    Upstream recommended removing these patches.
  - Add fix-buggy-fetch-url
  - Enable type_chat and type_chat_nick in default prefs.xml


author: Warren Togami <wtogami@redhat.com> - 2:2.0.0-0.22.beta5
changelog:
  - 2.0.0 beta5
  - Debian patches
      02_gnthistory-in-gtk
      03_gconf-gstreamer
      04_blist-memleak
      05_url-handler-xmpp
      06_jabber-registration-srv
      07_msn-custom-smiley-crash
  - SILC Account Edit Crash


author: Warren Togami <wtogami@redhat.com> - 2:2.0.0-0.19.beta4
changelog:
  - buildreq NetworkManager-glib-devel FC5+ (katzj)
  - #213800 debug window freeze fix
  - #212818 IRC SIGPIPE crash fix


author: Warren Togami <wtogami@redhat.com> - 2:2.0.0-0.17.beta4
changelog:
  - temporary workaround for gstreamer build bug in beta4
    --enable-gstreamer prevented it from working =)
    NOTE: beta4 removed libao support entirely.  Distros that lack gstreamer-0.10+
    will need to use command line sound output from now on.
  - Gadu Gadu is re-included in beta4 without requirement of external library


author: Warren Togami <wtogami@redhat.com> 2.0.0-0.3.beta3
changelog:
  - more spec cleanups
  - buildreq libXScrnSaver-devel, gettext, intltool, desktop-file-utils
  - disable mono for now due to #196877


author: Warren Togami <wtogami@redhat.com> - 1:1.5.0-9
changelog:
  - Ensure that security opt flags are used (#165795)
  - Many bug fixes from Peter Lawler (#171350)
    156: Fix Yahoo chatroom ignore on join
    157: Fix Italian yahoo profiles
    158: Strip HTML from status
    159: xmlnode cleanup
    160: Fix crash on non-terminated strings
    161: silc-close-gaim_request-window-prpl-disconnect-p1
    162: silc-close-gaim_request-window-prpl-disconnect-p2
    163: silc-close-gaim_request-window-prpl-disconnect-p3
    164: silc-close-gaim_request-window-prpl-disconnect-p4
    165: silc-close-gaim_request-window-prpl-disconnect-p5
    166: silc-close-gaim_request-window-prpl-disconnect-p6
    167: MSN data corruption fix
    168: msn-kill-convo-close-timeout-notices-p1
    169: msn-kill-convo-close-timeout-notices-p2
    170: msn-kill-convo-close-timeout-notices-p3
    171: forceful-connection_disconnect-not-wipe-password
    172: Clipboard leak and history scrolling fix
    173: smileys-logtype-p1
    174: smileys-logtype-p2
    175: Allow Italics in IRC
    176: Add more authors
    177: Update copyright
    178: Update HACKING doc
    179: Fix doc creation
    180: Fix AIM/ICQ Rate Limiting issue


author: Ray Strode <rstrode@redhat.com> - 1:1.5.0-7
changelog:
  - use upstream desktop file (except use generic name, because 
    this is our default instant messaging client)


author: Peter Jones <pjones@redhat.cm> - 1:1.5.0-4
changelog:
  - rebuild for new cairo, add -Wno-pointer-sign
  - add -Wno-pointer-sign until somebody maintaining this package makes it build
    without it.


author: Warren Togami <wtogami@redhat.com> - 1:1.5.0-2
changelog:
  - always use -z relro and FORTIFY_SOURCE opt flags for FC3+ and RHEL4+ 
    (compiler simply ignores these flags if they are unsupported)


author: Warren Togami <wtogami@redhat.com> - 1:1.5.0-1
changelog:
  - 1.5.0 security and bug fixes
    CAN-2005-2370 Gadu-Gadu memory alignment bug
    CAN-2005-2102 AIM/ICQ non-UTF-8 Filename Crash
    CAN-2005-2103 AIM/ICQ away message buffer overflow


author: Warren Togami <wtogami@redhat.com> 1:1.4.0-5
changelog:
  - FC5+ automatic -fstack-protector-all switch
  - 150: MSN buddy names with space disconnect and profile corruption
         (supercedes patch 149)
  - 151: Gadu Gadu memory alignment crash
  - 152: Rename Group Merge crash
  - 153: mailto: parse crash (util.c)
  - 154: mailto: parse crash (MSN)
  - 155: mailto: parse crash (Zephyr)


author: Warren Togami <wtogami@redhat.com> 1:1.4.0-4
changelog:
  - 149: MSN username with space disconnect fix
  - Do not own perl dir, remove empty files (#162994 jpo)


author: Warren Togami <wtogami@redhat.com> 1:1.3.1-0
changelog:
  - 1.3.1 more bug fixes
    CAN-2005-1269 CAN-2005-1934
  - enable Message Notification plugin by default


author: Warren Togami <wtogami@redhat.com> 1:1.3.0-1
changelog:
  - 1.3.0 many bug fixes and two security fixes
    long URL crash fix (#157017) CAN-2005-1261
    MSN bad messages crash fix (#157202) CAN-2005-1262


author: Warren Togami <wtogami@redhat.com> 1:1.1.4-4
changelog:
  - 144: POSIX functions became macros, build fix (#150429)
  - 145: Fix non-proxy yahoo file transfer
  - 146: Fix non-proxy yahoo buddy icons


author: Warren Togami <wtogami@redhat.com> 1:1.1.4-1
changelog:
  - 1.1.4 with MSN crash fix, g_stat() crash workaround
    CAN-2005-0208 Gaim HTML parsing DoS (another one)


author: Warren Togami <wtogami@redhat.com> 1:1.1.3-2
changelog:
  - 1.1.3 including two security fixes
    CAN-2005-0472 Client freezes when receiving certain invalid messages
    CAN-2005-0473 Client crashes when receiving specific malformed HTML


author: Warren Togami <wtogami@redhat.com> 0.82-1
changelog:
  - Update to 0.82 resolves several security issues and bugs
    CAN-2004-0500, CAN-2004-0754, CAN-2004-0784, CAN-2004-0785
    More details at http://gaim.sourceforge.net/security/


author: Warren Togami <wtogami@redhat.com> 0.81-4
changelog:
  - conditionalize features for alternate target distributions
  - remove unnecessary ExclusiveArch
  - other cleanups


author: Warren Togami <wtogami@redhat.com> 0.81-3
changelog:
  - CVS backport 133: CAN-2004-0500 MSNLP buffer overflow
                 134: Select buddy icon in new account crash
                 135: Jabber join crash
                 136: Jabber tooltip fake self crash


author: Warren Togami <wtogami@redhat.com> 0.81-1
changelog:
  - 0.81
  - krb5-devel for Zephyr
  - evolution-data-server-devel integration
    plugin disabled by default because it seems very unstable


author: Warren Togami <wtogami@redhat.com> 0.80-1
changelog:
  - update to 0.80
  - enable ExtPlacement plugin by default
  - Smiley Theme "Default" by default (bug fix)
  - Insertions -> Control-{B/I/U} by default


author: Warren Togami <wtogami@redhat.com> 0.79-2
changelog:
  - remove tray icon patch temporarily because it seems to cause more
    problems than it solves.
  - provide gaim-devel
  - CVS backport 128: Cached buddy icons fix


author: Warren Togami <wtogami@redhat.com> 0.79-1
changelog:
  - update to 0.79
  - update desktop patch
  - update header and pkgconfig locations
  - update default prefs
  - FC3 sed behavior workaround
  - temporarily disable evolution integration


author: Warren Togami <wtogami@redhat.com> 0.78-7
changelog:
  - CVS backport 125: MSN disconnect on non-fatal error fix
                 126: Paste html with img crash fix
                 127: Misplaced free fix


author: Warren Togami <wtogami@redhat.com> 0.77-7
changelog:
  - CVS backport 121: byte order badness and crashing copy & paste fix
                 122: history.so scroll to bottom in new tabs fix


author: Warren Togami <wtogami@redhat.com> 0.77-6
changelog:
  - CVS backport 118: x86-64 yahoo auth fix
                 119: Copy/paste fixes for UCS-2 encoded selection
                 120: IRC reconnect segfault fix
  - remove relnot.so plugin because it is unusable in FC
  - Default enable logging and history.so plugin
            enable autoreconnect plugin
  - Fix Gnome Default url handler


author: Warren Togami <wtogami@redhat.com> 0.77-3
changelog:
  - remove gnome-open manual, since 0.77 has "GNOME Default" as default.
  - update default prefs.xml, disable buddy icons in buddy list
  - CVS backport 114: plugin prefs saving fix
                 115: autoreconn-suppress-dialogs
                 116: fix smileys in dialogs
                 117: gtk+ 2.0 compat


author: Warren Togami <wtogami@redhat.com> 0.76-6
changelog:
  - CVS backports:
    111 Prevent Crash during password change if blank fields
    112 Prevent Crash if remote sends invalid characters
    113 Enable /etc/gaim/prefs.xml defaults for new profiles
  - Tray Icon enabled by default
  - Relabel internal version with V-R


author: Warren Togami <wtogami@redhat.com> 0.76-5
changelog:
  - CVS backports: 
    102 Fix ^F keybinding when gtkrc is set to emacs mode
    103 Add Missing File: evolution-1.5.x buildability
    104 When MSN server intermittently has problems accessing buddy list, MSN will crash with 0.76
    105, 106, 107 MSN Error reporting fixes
    108 History plugin causes unnecessary horizontal scrollbars
    109 Fix the text replace plugin 
    110 Prevent message sending while offline


author: Warren Togami <wtogami@redhat.com>
changelog:
  - CVS snapshot, generated with automake-1.7.9
  - update #4
  - update #2 but disable
  - #5 no longer needed
  - default to gnome-open #6
  - some spec cleanup


author: Christopher Blizzard <blizzard@redhat.com> 1:0.75-1.1.0
changelog:
  - Include patch that fixes a bunch of buffer-related problems, mostly
    from nectar@freebsd.org and some of my own changes.


author: Christopher Blizzard <blizzard@redhat.com> 1:0.75-0
changelog:
  - Update to 0.75.
  - Remove mem leak patch that is already included in 0.75.
  - Clean up a lot of old unused patches and old source tarballs.


author: Christopher Blizzard <blizzard@redhat.com> 0.59-7
changelog:
  - Include patch that uses htmlview instead of calling Netscape
    directly
  - Include patch that turns off the buddy ticker and changes the button
    look to the (sane) default.


author: Tim Powers <timp@redhat.com>
changelog:
  - updated to 0.11.0pre2
  - enable gnome support
  - updated ispell to aspell patch
  - cleaned up file list


author: Tim Powers <timp@redhat.com>
changelog:
  - some ideas taken from the package available at the gaim website, mainly to install the applet stuff too.


author: Tim Powers <timp@redhat.com>
changelog:
  - cleaned up spec for use with RPM 4.0 (al la _sysconfdir _datadir etc)
  - update to 0.9.17
  - yay! a man page!


author: Tomas Mraz - 1.2.0-1
changelog:
  - add lib subpackage to avoid multilib on the base package
  - add ability to compute hmacs on multiple files at once
  - improved debugging with FIPSCHECK_DEBUG


author: Joel Granados <jgranado@redhat.com> 0.1.0-4
changelog:
  - Create firstaidkit dummy package
  - Create firstaidkit-pluginsystem subpackage
  - Create firstaidkit-devel subpackage
  - Bump the release tag


author: Miroslav Lichvar <mlichvar@redhat.com> 1.2.1-2
changelog:
  - fix building with gcc-4.3 
  - reenable some assembly optimizations
  - hide private libFLAC symbols (#285961)
  - update license tag
  - add %check
  - remove -maltivec from CFLAGS


author: - Bastien Nocera <bnocera@redhat.com> - 1.2.0-3
changelog:
  - Make a few functions hidden, to try and avoid textrels
  - Disable optimisations on x86 for the same reason
    (#285961)


author: - Bastien Nocera <bnocera@redhat.com> - 1.1.3-1
changelog:
  - Update with work from Matthias Clasen <mclasen@redhat.com> up
    to upstream 1.1.3 (#229462)
  - Remove xmmx-flac Obsolete, as we don't ship the xmms plugin


author: Colin Walters <walters@redhat.com> 1.1.0-8
changelog:
  - New patch flac-1.1.0-gnu-stack.patch from Ulrich Drepper to mark asm
    as not requiring an executable stack


author: Warren Togami <wtogami@redhat.com> 1.1.0-4
changelog:
  - #119551 flac-xmms -> xmms-flac to match fedora.us and freshrpms.net
  - Obsoletes flac-libs to upgrade smoothly from fedora.us


author: Ville Skyttä <ville.skytta at iki.fi> 1.3-1jpp
changelog:
  - Update to 1.3.
  - Use sed instead of bash 2 extension when symlinking jars during build.
  - Add Distribution tag, fix URL, tweak Summary and description.


author: Kevin Fenzi <kevin@tummy.com> - 20090224-2
changelog:
  - Apply patch for python modules loading (fixes #489109)
  - use install -p to fix multiarch issue (fixes #480685)


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  - 20080927-1
  ☢ quick & dirty version bump to start working on F11 font packages
  ⟲ time to forget about pfaedit
  ⤑ take care of rpmlint warnings


author: Kevin Fenzi <kevin@tummy.com> - 20080828-1
changelog:
  - Upgrade to 20080828
  - Add Requires on autotrace. Fixes 460668
  - Confirm patch from 459451 is upstream here.


author: Roozbeh Pournader <roozbeh@farsiweb.info> - 20060125-1
changelog:
  - Update to 20060125 (bug #170177)
  - Update docs to 20060114
  - Change versioning to reflect upstream and follow packaging guidelines
  - Provide pfaedit (bug #176548)
  - Use %{?dist} tag (bug #176472)
  - Add localizations
  - No need to remove CVS subdir: fixed upstream
  - No need to covert man pages to UTF-8: fixed upstream
  - Fixed DOS line terminators
  - Use parallel build


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.0-2.20041231
changelog:
  - Avoid RPATH.
  - Convert man pages to UTF-8.
  - Fix pkgconfig and doc file permissions.
  - Use updated upstream icon.
  - Don't include installation documentation.


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> - 0:0.0-0.fdr.1.20040321
changelog:
  - Updated to 20040321.
  - Changed package name from pfaedit to fontforge.
  - Added Obsoletes: pfaedit.


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.6.031110
changelog:
  - Updated to 031110.
  - Eliminated build patch; incorporated in upstream tarball.
  - Re-added documentation tarball since no longer included in source tarball.
  - Added pfaicon.gif as Packaging directory disappeared from tarball.


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.3.031012
changelog:
  - Fixed non-standard value in desktop file (bug 497).
  - Added libuninameslist support.
  - Removed separate documentation tarball; mostly identical to those in source (bug 497).


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.2.031012
changelog:
  - Patched to use dynamic linking instead of dlopen'ing (bug 497).
  - Patched to use htmlview and use installed documentation (bug 497).
  - Added build req libxml2-devel (bug 497).
  - Disabled parallell make (bug 497).
  - Added desktop entry (bug 497).


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.1.031012
changelog:
  - Updated to 031012.
  - Removed .so links.
  - Removed empty AUTHORS file.
  - Removed the samples subpackage.


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.33-1
  — repo-font-audit: add ancilliary script to compare the results of two
    different runs
  - 1.32-1
  — repo-font-audit: add test for core fonts direct use
  — repo-font-audit: replace font naming tests by a more comprehensive one
    (in a separate utility)
  — repo-font-audit: add fedora packager detection
  — repo-font-audit: parallelize (at the cost of more filesystem space use)
  — repo-font-audit: misc output and reliability fixes


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.31-2
  — add yum-utils to deps
  - 1.31-1
  — Rework repo-font-audit messages based on packager feedback


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.24-1
  – improve repo-font-audit (make WWS check more accurate, support file://
    local repositories…)


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.22-1
  – workaround rpm eating end-of-line after %_font_pkg calls
  – add script to audit font sanity of yum repositories


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.21-1
  — try to handle more corner naming cases in lua macro – expect some fallout
    if your spec uses weird naming


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.19-3
  — remove workaround and explicit version checks
  - 1.19-2
  — workaround the fact koji is not ready yet
  - 1.19-1
  — Add a fontconfig dep to -devel so font autoprovides work (bz#485702)
  — Drop duplicated group declarations, rpm has been fixed (bz#470714)
  — Add partial templates for fonts subpackages of non-font source packages
  — Make them noarch (http://fedoraproject.org/wiki/Features/NoarchSubpackages)


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.18-1
  ✓ Panu wants autoprovides in rpm proper, drop it
  ✓ Guidelines people are ok with multiple ownership of directories, make the
    fonts macro auto-own the directory font files are put into


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.17-1
  ⁇ Tweak and complete documentation
  ☤ Merge the autoprovides stuff and try to make it actually work


author: Richard Hughes <rhughes@redhat.com>
changelog:
  - 1.16-2
  - Add fontconfig.prov and macros.fontconfig so that we can automatically
    generate font provides for packages at build time.
    This lets us do some cool things with PackageKit in the future.


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.13-1
  ⟃ Add another directory to avoid depending on unowned stuff
  ❤ use it to put the fontconfig examples in a better place


author: Nicolas Mailhot <nim at fedoraproject dot org>
changelog:
  - 1.9-1
  ☺ fix and complete fontconfig doc
  - 1.8-1
  ☺ simplify multi spec template: codify general case
  - 1.7-1
  ☺ split fontconfig template documentation is separate files
  - 1.6-1
  ☺ simplify spec templates
  - 1.5-1
  ☺ use ".conf" extension for fontconfig templates
  - 1.4-1
  ☺ small multi spec template fix


author: Tim Waugh <twaugh@redhat.com> 4.0.2-5
changelog:
  - Use stcolor driver for Epson Stylus Color 200 (bug #513676).
  - Don't ship 3-distribution symlink as CUPS already searches
    /usr/share/ppd (bug #514244).
  - Remove non-PPD files from PPD directory (bug #514242).


author: Tim Waugh <twaugh@redhat.com> 4.0.2-1
changelog:
  - Updated db-engine to 4.0.2 (bug #503188).
  - Updated foomatic-filters to 4.0.2 (bug #496521).
  - Updated db-hpijs to 20090701.
  - Updated db to 4.0-20090702.
  - This package obsoletes oki4linux (bug #491489).
  - Don't ship ChangeLog/README/USAGE for each of the 4 packages as it
    comes to more than 1MB (bug #492449).
  - Don't use mktemp in foomatic-rip.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-69
changelog:
  - Updated db-hpijs to 20090110.
  - Updated db to 20090110.
  - Updated filters to 3.0-20090110.
  - Updated db-engine to 3.0-20090110.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-68
changelog:
  - Updated db-hpijs to 20081124.
  - Updated db to 20081124.
  - Updated filters to 3.0-20081124.
  - Updated db-engine to 3.0-20081124.
  - Better build root.
  - Fixed summary.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-65
changelog:
  - Removed ampathxml and xml-cflags patches.
  - Updated db-hpijs to 20080904.
  - Updated db to 20080904.
  - Updated filters to 3.0-20080904.
  - Updated db-engine to 3.0-20080904.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-61
changelog:
  - Updated db-hpijs to 20080710.
  - Updated db to 20080710.
  - Updated filters to 3.0-20080710.
  - Updated db-engine to 3.0-20080710.
  - Ship a defaultspooler file to avoid the need for spooler
    auto-detection (bug #454684).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-56
changelog:
  - Updated filters to 3.0-20080211.
  - Updated db-hpijs to 20080211.
  - Updated db-engine to 3.0-20080211.
  - Updated db to 3.0-20080211.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-53
changelog:
  - Updated db-hpijs to 20071218.
  - Updated db to 3.0-20071218.
  - Updated db-engine to 3.0-20071218.
  - Updated filters to 3.0-20071218 (bug #416881).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-51
changelog:
  - Build requires perl(ExtUtils::MakeMaker).
  - Updated filters to 3.0-20070919.
  - Updated db to 20070919.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-50
changelog:
  - Removed references to unshipped drivers:
    * drv_x125
    * ml85p
    * pbm2lxwl
    * pbmtozjs
    * bjc800j


author: Tim Waugh <twaugh@redhat.com> 3.0.2-49
changelog:
  - Safe default margins for PPDs (bug #244161).
  - Added missing IEEE 1284 ID for HP Photosmart 380 (bug #241352).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-48
changelog:
  - Updated db to 3.0-20070614.
  - Updated db-engine to 3.0-20070614.
  - Updated db-hpijs to 20070614.
  - Updated filters to 3.0-20070614.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-43
changelog:
  - Updated db to 3.0-20070105 (bug #214037, bug #191661, bug #198999,
    bug #191504, bug #187387, bug #188762, bug #170373, bug #221121,
    bug #214801).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-39
changelog:
  - Updated db-engine to 3.0-20061031.
  - Updated db to 3.0-20061031.
  - Remove references to foo2zjs and foo2oak (bug #208851).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-38
changelog:
  - Change a2ps requirement to mpage.
  - Make CUPS driver work with drivers containing '-' in their names
    (bug #201398).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-32
changelog:
  - Fix foomatic-cleanupdrivers.
  - Updated db-engine to 3.0-20060117.
  - Handle PPDs with default option values of '0'.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-29
changelog:
  - Updated db-engine to 3.0-20051209.
  - Updated db-hpijs to 1.5-20051209.
  - Updated filters to 3.0-20051209.  No longer need rip-cvs patch.
  - Updated db to 3.0-20051209.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-28
changelog:
  - Remove explicit perl module package dependencies.  These should be
    picked up by the RPM during the build process automatically anyway.
    Fixes bug #167997.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-25
changelog:
  - Add IEEE 1284 ID for HP LaserJet 4200 (bug #166638).
  - Add IEEE 1284 ID for HP LaserJet 5000 (bug #167154).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-24
changelog:
  - Updated db to 3.0-20050804.
  - No longer need hplj5 patch.
  - Conflicts with system-config-printer before the parser bug was fixed.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Add IEEE 1284 ID for Epson Stylus Photo 915 (bug #160030).
  - Add IEEE 1284 ID for Ricoh Aficio 2228C PS (bug #160036).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fix Postscript driver (bug #151645).
  - Add IEEE 1284 ID for HP DeskJet 5150 (bug #154518).
  - Add IEEE 1284 ID for HP LaserJet 2420 (bug #114191).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Corrected IEEE 1284 information for HP DeskJet 6540 (bug #147288).
  - Added IEEE 1284 information for Epson Stylus C82 (bug #147230).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Added IEEE 1284 information for Okidata Okipage 6ex (bug #143964).
  - Added IEEE 1284 information for Epson Stylus Photo R300 (bug #143939).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-10
changelog:
  - Added IEEE 1284 information for HP-Color_Inkjet_Printer_CP1700 (bug #141594).
  - Added IEEE 1284 information for Samsung-ML-1710 (bug #141163).
  - Added IEEE 1284 information for HP-OfficeJet_G95 (bug #141057).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-9
changelog:
  - Updated db to 20041124.
  - Updated hpijs-db to 1.5-20041124.
  - No longer need HP DJ 6122 patch.
  - No longer need ieee1284 patch.
  - Updated Omni-printers to 0.9.2.


author: Tim Waugh <twaugh@redhat.com> 3.0.2-6
changelog:
  - Add autodetect information for HP LaserJet 8150 (bug #139683).
  - Add autodetect information for Epson Stylus Color 777 (bug #139629).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-5
changelog:
  - Ship data as non-executable (bug #139271).
  - Corrected autodetect information for HP Business InkJet 1100 (bug #139258).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-4
changelog:
  - Add autodetect information for HP Business InkJet 1100 (bug #139258).
  - Add autodetect information for Epson Stylus Photo 790 (bug #139266).
  - Add autodetect information for HP DJ 3820 (bug #139271).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-2
changelog:
  - Use gimp-print driver for HP 2000C (bug #133647).
  - Add autodetect information for Lexmark Z52 (bug #135178).


author: Tim Waugh <twaugh@redhat.com> 3.0.2-1
changelog:
  - Updated filters to 3.0.2.
  - Updated db-engine to 3.0.2.
  - No longer need Omni PageSize patch or lvalue patch.


author: Tim Waugh <twaugh@redhat.com> 3.0.1-1
changelog:
  - Upgrade db to 20040219.
  - Upgrade hpijs to 1.5-20040219.
  - Upgrade engine to 3.0.1.
  - Upgrade filters to 3.0.1.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-23
changelog:
  - Fix up HP Color Inkjet CP1700 support.
  - Remove PrintoutMode option from gimp-print driver to avoid breaking it.
  - Update filters to 3.0.1rc3.
  - Update engine to 3.0.1rc2
  - No long need symlink patch.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-21
changelog:
  - Build for Fedora Core 1 printer drivers update.
  - Revert Omni update temporarily.
  - Downgrade engine to 20031217 to stick to the stable branch.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-19
changelog:
  - Build for Fedora Core 1 printer drivers update.
  - No longer need symlink patch.
  - Updated fontpath patch.
  - Updated engine to 20040112.
  - Updated db to 20040112.
  - Updated gimp-print data to 4.2.6.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-18
changelog:
  - Build for Fedora Core 1 printer drivers update.
  - Explicitly state conflict with hpijs < 1.5.
  - Make foomatic-ppdfile accept '-t type' like foomatic-datafile used to.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-14
changelog:
  - Updated db to 20031217.
  - Updated engine to 20031217.
  - Updated hpijs to 1.5-20031217.
  - Use relative symlinks.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-12
changelog:
  - Undo over-zealous percent escaping in PostScript.xml
  - Build requires libxml2-devel (bug #110589).
  - Use relative, not absolute, symlink for CUPS filter.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-10
changelog:
  - Updated db to 20031105.
  - Drop filters path patch.
  - Updated fontpath patch, both libdir patches.
  - Updated engine and filters to 3.0-20031105.
  - Updated hpijs db to 1.4-1.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-5
changelog:
  - Add some Dell printers.
  - Updated foomatic-db to 20030603.
  - Updated missing UPP list for ghostscript 7.07.


author: Tim Waugh <twaugh@redhat.com> 3.0.0-0.beta2.1
changelog:
  - 3.0.0beta2.
  - Updated path patch.
  - No longer need FOOMATIC_LIBDIR, generic PS, ids, postscript-duplex,
    hpijs13, psc2210, duplex184 patches.
  - Add hpijs support back in.
  - Fix up references to old printer IDs.


author: Tim Waugh <twaugh@redhat.com> 2.0.2-11
changelog:
  - Add autodetect info for HP DeskJet 656C.  It doesn't really do
    IEEE 1284 IDs, but since it's a USB device we can figure out its
    manufacturer and model anyway.


author: Tim Waugh <twaugh@redhat.com> 2.0.2-1
changelog:
  - 2.0.2.
  - No longer need 67973, 970c patches.
  - Remove cups-drivers-* packages (no longer needed).
  - Remove files not shipped.  Ship filter.conf.
  - Conditionally restart cups.
  - Use libdir.
  - Don't put things in site_perl; use vendor_perl instead (bug #73528).


author: Tim Waugh <twaugh@redhat.com> 1.9-0.20020517.3
changelog:
  - Remove explicit perl-Storable dependency; it should be perl(Storable),
    and that is picked up automatically.


author: Tim Waugh <twaugh@redhat.com> 1.9-0.20020517.2
changelog:
  - Fix release number.
  - Drop gen-ppds from the file manifest---use foomatic-compiledb instead
    (bug #63622).


author: Tim Waugh <twaugh@redhat.com> 1.9-0.20020517.0.1
changelog:
  - Update to CVS.
  - Updated requirements.
  - Updated path and libdir patches.
  - Drop hpijs 1.0.2 patch.
  - foomatic-datafile has moved to %{_bindir}.
  - Update gimp-print data to 4.2.1.
  - Update Omni printer data to 0.6.1.


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20020130.1
changelog:
  - Update to CVS.
  - No longer need the cachedir patch.
  - Fix config file path.
  - Look in /usr/local/bin last, not first, in lpdomatic (bug #57915).


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20020129.1
changelog:
  - Update to CVS.
  - Patches no longer needed: prepend, fd3.
  - Use RPM_OPT_FLAGS.
  - Allow non-root users to use foomatic-datafile (bug #58956).


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20020124.1
changelog:
  - Update to CVS.
  - Updated Omni printers to those in Omni 0.5.1.
  - Updated patches: prepend, fd3.
  - Patches no longer needed: utf8, lpdomatic.
  - Added gimp-print (formerly stp) foomatic db info, and removed the old
    stp.xml file.
  - Conflict with ghostscript if it doesn't have gimp-print-4.2.0 yet.


author: Tim Waugh <twaugh@redhat.com> 1.1-0.20011218.2
changelog:
  - REALLY fix PCL fixup code (bug #55909, others).
  - PreReq fileutils, initscripts (bug #56984).
  - Fix prepends in lpdomatic (bug #57371).
  - Run foomatic-cleanupdrivers during install, to remove driver entries
    with no command line.
  - Put lpdomatic in /usr/sbin again.
  - Fix foomatic-gswrapper's file descriptor manipulations (bug #56871).


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011217.2
changelog:
  - fix the rest of the quoting issues with foomatic-combo-xml with the patch
  - foomatic-1.1-20011217-quotes.patch. This has been sent upstream.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011217.1
changelog:
  - respin to pull in latest foomatic database, fixes:
  -	properly use the cache in relation to foomatic-combo-xml's output
  -	fix _some_ of the quoting issues with calling foomatic-combo-xml


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011205.1
changelog:
  - respin to pull in latest foomatic database, fixes:
  -	droping half of a large job
  -	-Mutf8 added to the upstream filters
  -	miscelaneous printer db updates


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011018.5
changelog:
  - changed the patch to use the -Mutf8 command line option,
  - and to restart the printserver, after rebuilding the settings.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20011018.4
changelog:
  - grumble. Some drivers use inline perl scripts, and need the 'use utf8;'
  - pragma. Without it, they break on _some_ of their options.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20010905.1
changelog:
  - upgraded to latest foomatic, we now have fast overview generation!
  - this means that there is no prebuilt overview file.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20010828.1
changelog:
  - WOW! The latest foomatic uses Till Kamppeter's C based combo compiler.
  - It is now fast enough that there is no real benifit to precompiling.
  - NOTE: this forces the package to stop being noarched.


author: Crutcher Dunnavant <crutcher@redhat.com> 1.1-0.20010825.1
changelog:
  - did a fresh database pull, which contains the old japanese printers as well.
  - removed japanese hack.


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010717mdk
changelog:
  - Added job listing/removal/manipulation and queue control to
    foomatic-printjob
  - Support for printing multiple copies with PDQ


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010714mdk
changelog:
  - Included the cupsomatic filter script
  - When a queue is set up, default options can be set now
  - Help messages of foomatic-configure and foomatic-printjob cleaned up.


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010713mdk
changelog:
  - Many bugfixes in "foomatic-printjob".
  - "foomatic-configure" adds the Foomatic config file directory automatically
    to the search paths of PDQ.
  - Printing a help page under PDQ was broken.


author: Till Kamppeter <till@mandrakesoft.com> 1.1-0.20010711mdk
changelog:
  - initial release.
  - Deleted the obsolete drivers "stp", "cZ11", and "hpdj".
  - Patch applied which flushes the memory cache regularly, otherwise
    foomatic-configure would hang when the Foomatic data of GIMP-Print is
    installed.


author: Tim Waugh <twaugh@redhat.com> 4.0-5.20090819
changelog:
  - Updated to foomatic-db-4.0-20090819.
  - Removed deprecated foomatic-db-hpijs tarball.
  - Use buildroot macro throughout.


author: Tim Waugh <twaugh@redhat.com> 4.0-3.20090702
changelog:
  - License for ppds sub-package should include GPLv2+.
  - Ship COPYING file in main package.
  - Added filesystem sub-package for directory ownership.


author: Tim Waugh <twaugh@redhat.com> 4.0-2.20090702
changelog:
  - Move foomatic-db-ppds symlink to ppds sub-package.
  - Use sed instead of perl in raster PPDs (bug #512739).
  - Removed code to convert old-style printer IDs (there are none).
  - Ship README file.


author: Ralph Apel <r.apel at r-apel.de> - 0:0.20.5-9jpp
changelog:
  - First build for JPP-1.7
  - Replace avalon-framework, avalon-logkit with their new excalibur-*
    counterparts
  - Drop non-free jimi and jai BRs


author: Ville SkyttÃ¤ <ville.skytta at iki.fi> - 0:0.20.5-3jpp
changelog:
  - BuildRequires ant-optional.
  - Crosslink with full J2SE javadocs instead of just JAXP/XML-commons.
  - Add Main-Class back to manifest.


author: Ville SkyttÃ¤ <ville.skytta at iki.fi> - 0:0.20.5-1jpp
changelog:
  - Update to 0.20.5.
  - Crosslink with xml-commons-apis and batik javadocs.
  - BuildRequires jai, jce and jimi.


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 0.20.3-0.rc.1jpp
changelog:
  - 0.20.3rc
  - first unified release
  - javadoc into javadoc package
  - no dependencies for manual package
  - s/jPackage/JPackage
  - adaptation to new xalan-j2 package
  - requires and buildrequires avalon-logkit


author: Karsten Hopp <karsten@redhat.com> 0.1-8.git04fd09cfa.1
changelog:
  - Excludearch s390 s390x, as we don't have libusb1 on mainframe, we can't build
    the required libfprint package


author: Mike A. Harris <mharris@redhat.com> 2.4.0-3
changelog:
  - Added "Requires: libGL-devel libGLU-devel" to fix bug (#179464)
  - Change file based GL header build dep to BuildRequires: libGL-devel


author: Mike A. Harris <mharris@redhat.com> 2.4.0-1
changelog:
  - Updated to freeglut-2.4.0
  - Removed unneeded patches:
    - freeglut-2.2.0-gcc4-fix-invalid-lvalue-in-assignment-cvsps-392-393.patch
  - Use "-p /sbin/ldconfig" in post/postun scripts instead of a separate script.


author: Mike A. Harris <mharris@redhat.com> 2.2.0-16
changelog:
  - Added freeglut-2.2.0-gcc4-fix-invalid-lvalue-in-assignment-cvsps-392-393.patch
    to fix "invalid lvalue in assignment" bugs reported by gcc 4
  - Added "-Wall" to CFLAGS in specfile.


author: Mike A. Harris <mharris@redhat.com> 2.2.0-11
changelog:
  - Updated "Obsoletes: glut" to be "Obsoletes: glut <= 3.7" and
    "Obsoletes: glut-devel" to be "Obsoletes: glut-devel <= 3.7" as per
    suggestion from Matthias Saou in comment #14 of bug (#107228)


author: Mike A. Harris <mharris@redhat.com> 2.2.0-10
changelog:
  - Initial Red Hat packaging created by taking the ATrpms src.rpm package from
    http://tinyurl.com/2goog as suggested in bugzilla bug (#107228)
  - Bumped the Release field to "10" so our package is newer when people
    upgrade to it, as requested in bug (#107228)
  - Removed redundant version/release macros from top of specfile
  - Versioned buildroot directory
  - Add --enable-warnings arg to ./configure script
  - Add HTML documentation to main package
  - Made "glut" virtual provides be "glut = 3.7"
  - Do not include *.la files


author: Mike A. Harris <mharris@www.linux.org.uk> 1.3-0.20020125.2
changelog:
  - Oddly, when I build this on my workstation, it only builds static libs, but
    when I build it in the buildsystem it builds shared and static libs.  Must
    be a twilight zone thing going on.  Add shared libs to file lists.


author: Mike A. Harris <mharris@www.linux.org.uk> 1.3-0.20020125.1
changelog:
  - Added -L/usr/X11R6/%{_lib} configure script invocation and CFLAGS so lib64
    is treated properly on x86_64/ppc64/s390x architectures


author: Jan Safranek <jsafrane@redhat.com> - 0.7.12-3
changelog:
  - Fix init scripts to be LSB compliant and return correct exit codes
    and provide mandatory actions (#523169, #523177)


author: Jesse Keating <jkeating@redhat.com> - 0.7.6-2
changelog:
  - Fix the bad dist macro
  - Remove version define, that's what the Version line is for
  - Remove name define, that's what the Name line is for
  - Use the real Release line in the if debug statement


author: Phil Knirsch <pknirsch@redhat.com> 0.4.6-2.fc7
changelog:
  - Several fixes due to Fedora package review:
   o Fixed Group for all subpackages
   o Added missng Requires(Post|Preun) for several packages
   o Removed static libraries and .la files
   o Fixed open bug (missing mode for O_CREATE)
   o Fixed incorrect options for bmc-watchdog daemon


author: Phil Knirsch <pknirsch@redhat.com> 0.4.6-1.fc7
changelog:
  - Specfile cleanup for Fedora inclusion
  - Fixed several rpmlint warnings and errors:
   o Moved all devel libs to proper package


author: John Dennis <jdennis@redhat.com> - 2.1.8-2
changelog:
  - bug #526559 initial install should run bootstrap to create certificates
    running radiusd in debug mode to generate inital temporary certificates
    is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
    rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
  - bug #528493 use sha1 algorithm instead of md5 during cert generation
    the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
    were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months


author: John Dennis <jdennis@redhat.com> - 2.1.8-1
changelog:
  - update to latest upstream
    Feature improvements
    * Print more descriptive error message for too many EAP sessions.
      This gives hints on what to do when "failed to store handler"
    * Commands received from radmin are now printed on stdout when
      in debugging mode.
    * Allow accounting packets to be written to a detail file, even
      if they were read from a different detail file.
    * Added OpenSSL license exception (src/LICENSE.openssl)

    Bug fixes
    * DHCP sockets can now set the broadcast flag before binding to a
      socket.  You need to set "broadcast = yes" in the DHCP listener.
    * Be more restrictive on string parsing in the config files
    * Fix password length in scripts/create-users.pl
    * Be more flexible about parsing the detail file.  This allows
      it to read files where the attributes have been edited.
    * Ensure that requests read from the detail file are cleaned up
      (i.e. don't leak) if they are proxied without a response.
    * Write the PID file after opening sockets, not before
      (closes bug #29)
    * Proxying large numbers of packets no longer gives error
      "unable to open proxy socket".
    * Avoid mutex locks in libc after fork
    * Retry packet from detail file if there was no response.
    * Allow old-style dictionary formats, where the vendor name is the
      last field in an ATTRIBUTE definition.
    * Removed all recursive use of mutexes.  Some systems just don't
      support this.
    * Allow !* to work as documented.
    * make templates work (see templates.conf)
    * Enabled "allow_core_dumps" to work again
    * Print better errors when reading invalid dictionaries
    * Sign client certificates with CA, rather than server certs.
    * Fix potential crash in rlm_passwd when file was closed
    * Fixed corner cases in conditional dynamic expansion.
    * Use InnoDB for MySQL IP Pools, to gain transactional support
    * Apply patch to libltdl for CVE-2009-3736.
    * Fixed a few issues found by LLVM's static checker
    * Keep track of "bad authenticators" for accounting packets
    * Keep track of "dropped packets" for auth/acct packets
    * Synced the "debian" directory with upstream
    * Made "unlang" use unsigned 32-bit integers, to match the
      dictionaries.


author: John Dennis <jdennis@redhat.com> - 2.1.7-7
changelog:
  - Remove devel subpackage. It doesn't make much sense to have a devel package since
    we don't ship libraries and it produces multilib conflicts.


author: John Dennis <jdennis@redhat.com> - 2.1.7-6
changelog:
  - more spec file clean up from review comments
  - remove freeradius-libs subpackage, move libfreeradius-eap and
    libfreeradius-radius into the main package
  - fix subpackage requires, change from freeradius-libs to main package
  - fix description of the devel subpackage, remove referene to non-shipped libs
  - remove execute permissions on src files included in debuginfo
  - remove unnecessary use of ldconfig
  - since all sub-packages now require main package remove user creation for sub-packages
  - also include the LGPL library license file in addition to the GPL license file
  - fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6


author: John Dennis <jdennis@redhat.com> - 2.1.7-3
changelog:
  - bug #522111 non-conformant initscript
    also change permission of /var/run/radiusd from 0700 to 0755
    so that "service radiusd status" can be run as non-root


author: John Dennis <jdennis@redhat.com> - 2.1.7-1
changelog:
  - enable building of the rlm_wimax module
  - pcap wire analysis support is enabled and available in utils subpackage
  - Resolves bug #523053 radtest manpage in wrong package
  - update to latest upstream release, from upstream Changelog:
    Feature improvements
      * Full support for CoA and Disconnect packets as per RFC 3576
        and RFC 5176.  Both receiving and proxying CoA is supported.
      * Added "src_ipaddr" configuration to "home_server".  See
        proxy.conf for details.
      * radsniff now accepts -I, to read from a filename instead of
        a device.
      * radsniff also prints matching requests and any responses to those
        requests when '-r' is used.
      * Added example of attr_filter for Access-Challenge packets
      * Added support for udpfromto in DHCP code
      * radmin can now selectively mark modules alive/dead.
        See "set module state".
      * Added customizable messages on login success/fail.
        See msg_goodpass && msg_badpass in log{} section of radiusd.conf
      * Document "chase_referrals" and "rebind" in raddb/modules/ldap
      * Preliminary implementation of DHCP relay.
      * Made thread pool section optional.  If it doesn't exist,
        the server will run single-threaded.
      * Added sample radrelay.conf for people upgrading from 1.x
      * Made proxying more stable by failing over, rather than
        rejecting the first request.  See "response_window" in proxy.conf
      * Allow home_server_pools to exist without realms.
      * Add dictionary.iea (closes bug #7)
      * Added support for RFC 5580
      * Added experimental sql_freetds module from Gabriel Blanchard.
      * Updated dictionary.foundry
      * Added sample configuration for MySQL cluster in raddb/sql/ndb
        See the README file for explanations.
    Bug fixes
      * Fixed corner case where proxied packets could have extra
        character in User-Password attribute.  Fix from Niko Tyni.
      * Extended size of "attribute" field in SQL to 64.
      * Fixes to ruby module to be more careful about when it builds.
      * Updated Perl module "configure" script to check for broken
        Perl installations.
      * Fix "status_check = none".  It would still send packets
        in some cases.
      * Set recursive flag on the proxy mutex, which enables safer
        cleanup on some platforms.
      * Copy the EAP username verbatim, rather than escaping it.
      * Update handling so that robust-proxy-accounting works when
        all home servers are down for extended periods of time.
      * Look for DHCP option 53 anywhere in the packet, not just
        at the start.
      * Fix processing of proxy fail handler with virtual servers.
      * DHCP code now prints out correct src/dst IP addresses
        when sending packets.
      * Removed requirement for DHCP to have clients
      * Fixed handling of DHCP packets with message-type buried in the packet
      * Fixed corner case with negation in unlang.
      * Minor fixes to default MySQL & PostgreSQL schemas
      * Suppress MSCHAP complaints in debugging mode.
      * Fix SQL module for multiple instance, and possible crash on HUP
      * Fix permissions for radius.log for sites that change user/group,
        but which don't create the file before starting radiusd.
      * Fix double counting of packets when proxying
      * Make %l work
      * Fix pthread keys in rlm_perl
      * Log reasons for EAP failure (closes bug #8)
      * Load home servers and pools that aren't referenced from a realm.
      * Handle return codes from virtual attributes in "unlang"
        (e.g. LDAP-Group).  This makes "!(expr)" work for them.
      * Enable VMPS to see contents of virtual server again
      * Fix WiMAX module to be consistent with examples.  (closes bug #10)
      * Fixed crash with policies dependent on NAS-Port comparisons
      * Allowed vendor IDs to be be higher than 32767.
      * Fix crash on startup with certain regexes in "hints" file.
      * Fix crash in attr_filter module when packets don't exist
      * Allow detail file reader to be faster when "load_factor = 100"
      * Add work-around for build failures with errors related to
        lt__PROGRAM__LTX_preloaded_symbols.  libltdl / libtool are horrible.
      * Made ldap module "rebind" option aware of older, incompatible
        versions of OpenLDAP.
      * Check value of Fall-Through in attr_filter module.


author: John Dennis <jdennis@redhat.com> - 2.1.6-1
changelog:
  - update to latest upstream release, from upstream Changelog:
    Feature improvements
      * radclient exits with 0 on successful (accept / ack), and 1
        otherwise (no response / reject)
      * Added support for %{sql:UPDATE ..}, and insert/delete
        Patch from Arran Cudbard-Bell
      * Added sample "do not respond" policy.  See raddb/policy.conf
        and raddb/sites-available/do_not_respond
      * Cleanups to Suse spec file from Norbert Wegener
      * New VSAs for Juniper from Bjorn Mork
      * Include more RFC dictionaries in the default install
      * More documentation for the WiMAX module
      * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
        This helps with Active Directory.  See raddb/modules/ldap
      * Don't load pre/post-proxy if proxying is disabled.
      * Added %{md5:...}, which returns MD5 hash in hex.
      * Added configurable "retry_interval" and "poll_interval"
        for "detail" listeners.
      * Added "delete_mppe_keys" configuration option to rlm_wimax.
        Apparently some WiMAX clients misbehave when they see those keys.
      * Added experimental rlm_ruby from
        http://github.com/Antti/freeradius-server/tree/master
      * Add Tunnel attributes to ldap.attrmap
      * Enable virtual servers to be reloaded on HUP.  For now, only
        the "authorize", "authenticate", etc. processing sections are
        reloaded.  Clients and "listen" sections are NOT reloaded.
      * Updated "radwatch" script to be more robust.  See scripts/radwatch
      * Added certificate compatibility notes in raddb/certs/README,
        for compatibility with different operating systems. (i.e. Windows)
      * Permit multiple "-e" in radmin.
      * Add support for originating CoA-Request and Disconnect-Request.
        See raddb/sites-available/originate-coa.
      * Added "lifetime" and "max_queries" to raddb/sql.conf.
        This helps address the problem of hung SQL sockets.
      * Allow packets to be injected via radmin.  See "inject help"
        in radmin.
      * Answer VMPS reconfirmation request.  Patch from Hermann Lauer.
      * Sample logrotate script in scripts/logrotate.freeradius
      * Add configurable poll interval for "detail" listeners
      * New "raddebug" command.  This prints debugging information from
        a running server.  See "man raddebug.
      * Add "require_message_authenticator" configuration to home_server
        configuration.  This makes the server add Message-Authenticator
        to all outgoing Access-Request packets.
      * Added smsotp module, as contributed by Siemens.
      * Enabled the administration socket in the default install.
        See raddb/sites-available/control-socket, and "man radmin"
      * Handle duplicate clients, such as with replicated or
        load-balanced SQL servers and "readclients = yes"
    Bug fixes
      * Minor changes to allow building without VQP.
      * Minor fixes from John Center
      * Fixed raddebug example
      * Don't crash when deleting attributes via unlang
      * Be friendlier to very fast clients
      * Updated the "detail" listener so that it only polls once,
        and not many times in a row, leaking memory each time...
      * Update comparison for Packet-Src-IP-Address (etc.) so that
        the operators other than '==' work.
      * Did autoconf magic to work around weird libtool bug
      * Make rlm_perl keep tags for tagged attributes in more situations
      * Update UID checking for radmin
      * Added "include_length" field for TTLS.  It's needed for RFC
        compliance, but not (apparently) for interoperability.
      * Clean up control sockets when they are closed, so that we don't
        leak memory.
      * Define SUN_LEN for systems that don't have it.
      * Correct some boundary conditions in the conditional checker ("if")
        in "unlang".  Bug noted by Arran Cudbard-Bell.
      * Work around minor building issues in gmake.  This should only
        have affected developers.
      * Change how we manage unprivileged user/group, so that we do not
        create control sockets owned by root.
      * Fixed more minor issues found by Coverity.
      * Allow raddb/certs/bootstrap to run when there is no "make"
        command installed.
      * In radiusd.conf, run_dir depends on the name of the program,
        and isn't hard-coded to "..../radiusd"
      * Check for EOF in more places in the "detail" file reader.
      * Added Freeswitch dictionary.
      * Chop ethernet frames in VMPS, rather than droppping packets.
      * Fix EAP-TLS bug.  Patch from Arnaud Ebalard
      * Don't lose string for regex-compares in the "users" file.
      * Expose more functions in rlm_sql to rlm_sqlippool, which
        helps on systems where RTLD_GLOBAL is off.
      * Fix typos in MySQL schemas for ippools.
      * Remove macro that was causing build issues on some platforms.
      * Fixed issues with dead home servers.  Bug noted by Chris Moules.
      * Fixed "access after free" with some dynamic clients.

  - fix packaging bug, some directories missing execute permission
    /etc/raddb/dictionary now readable by all.


author: John Dennis <jdennis@redhat.com> - 2.1.3-1
changelog:
  - upgrade to latest upstream release, upstream summary follows:
    The focus of this release is stability.
    Feature Improvements:
      * Allow running with "user=radiusd" and binding to secure sockets.
      * Start sending Status-Server "are you alive" messages earlier, which
        helps with proxying multiple realms to a home server.
      * Removed thread pool code from rlm_perl.  It's not necessary.
      * Added example Perl configuration to raddb/modules/perl
      * Force OpenSSL to support certificates with SHA256. This seems to be
        necessary for WiMAX certs.
    Bug fixes:
      * Fix Debian patch to allow it to build.
      * Fix potential NULL dereference in debugging mode on certain
        platforms for TTLS and PEAP inner tunnels.
      * Fix uninitialized memory in handling of vendor definitions
      * Fix parsing of quoted (but non-string) attributes in the "users" file.
      * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
      * use SUN_LEN in control socket, to avoid truncation on some platforms.
      * Correct internal handling of "debug condition" to prevent it from
        being over-written.
      * Check return code of regcomp in "unlang", so that invalid regular
        expressions are caught rather than mishandled.
      * Make rlm_sql use <ltdl.h>.  Addresses bug #610.
      * Document list "type = status" better.  Closes bug #580.
      * Set "default days" for certificates, because OpenSSL won't do it.
        This closes bug #615.
      * Reference correct list in example raddb/modules/ldap. Closes #596.
      * Increase default schema size for Acct-Session-Id to 64. Closes #540.
      * Fix use of temporary files in dialup-admin.  Closes #605 and
        addresses CVE-2008-4474.
      * Addressed a number of minor issues found by Coverity.
      * Added DHCP option 150 to the dictionary.  Closes #618.


author: John Dennis <jdennis@redhat.com> - 2.1.1-8
changelog:
  - add --with-system-libtool to configure as a workaround for
  undefined reference to lt__PROGRAM__LTX_preloaded_symbols


author: John Dennis <jdennis@redhat.com> - 2.1.1-3
changelog:
  - make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
  - remove diaupadmin packages, it's not well supported and there are problems with it.


author: John Dennis <jdennis@redhat.com> - 2.1.1-1
changelog:
  - Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
    permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770


author: John Dennis <jdennis@redhat.com> - 2.0.5-2
changelog:
  - Resolves: bug #453761: FreeRADIUS %post should not include chown -R
    specify file attributes for /etc/raddb/ldap.attrmap
    fix consistent use of tabs/spaces (rpmlint warning)


author: John Dennis <jdennis@redhat.com> - 2.0.5-1
changelog:
  - upgrade to latest upstream, see Changelog for details,
    upstream now has more complete fix for bug #447545, local patch removed


author: John Dennis <jdennis@redhat.com> - 2.0.4-1
changelog:
  - upgrade to latest upstream, see Changelog for details
  - resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel


author: John Dennis <jdennis@redhat.com> - 2.0.3-2
changelog:
  - remove support for radrelay, it's different now
  - turn off default inclusion of SQL config files in radiusd.conf since SQL
    is an optional RPM install
  - remove mssql config files


author: John Dennis <jdennis@redhat.com> - 2.0.3-1
changelog:
  - Upgrade to current upstream 2.0.3 release
  - Many thanks to Enrico Scholz for his spec file suggestions incorporated here
  - Resolve: bug #438665: Contains files owned by buildsystem
  - Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
    to further partition external dependencies.
  - Clean up some unnecessary requires dependencies
  - Add versioned requires between subpackages


author: <jdennis@redhat.com> - 1.1.7-3.3.ipa
changelog:
  - add support in rlm_ldap for reading clients from ldap
  - fix TLS parameter controling if a cert which fails to validate
    will be accepted (i.e. self-signed),
    rlm_ldap config parameter=tls_require_cert
    ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
    ldap_set_option() when it should have been ldap_int_tls_config()


author: Thomas Woerner <twoerner@redhat.com> 1.1.7-1
changelog:
  - new versin 1.1.7
  - install snmp MIB files
  - dropped LDAP_DEPRECATED flag, it is upstream
  - marked config files for sub packages as config (rhbz#240400)
  - moved db files to /var/lib/raddb (rhbz#199082)


